EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...

143840601 Kenmore Heater - Overview

Sections of the 143840601

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Door Gasket – Part Number: 312238
Door Gasket
PartSelect #: PS2031905
Manufacturer #: 312238
  No Longer Available
"8""PORC R/PAN " – Part Number: PM32X143
"8""PORC R/PAN "
PartSelect #: PS220966
Manufacturer #: PM32X143
$25.15
  In Stock
Order now and your part arrives by Mar 19
Belt Drive Motor Kit with Capacitor – Part Number: 285222
Belt Drive Motor Kit with Capacitor
PartSelect #: PS334458
Manufacturer #: 285222
This two-speed motor performs 1725 revolutions per minute in one speed, and 1140 revolutions per minute in the other speed. It runs at 1/2 horsepower and carries 115 volts.
  No Longer Available
"6"" GE CHROME PAN W/RIN – Part Number: PM32X12001GDS
"6"" GE CHROME PAN W/RIN
PartSelect #: PS2355750
Manufacturer #: PM32X12001GDS
$14.65
  Special Order
8 PORC BOWL – Part Number: PM32X5043GDS
8 PORC BOWL
PartSelect #: PS220987
Manufacturer #: PM32X5043GDS
$23.05
  Special Order
Grille – Part Number: 85442
Grille
PartSelect #: PS12282004
Manufacturer #: 85442
  No Longer Available
SCREW,PHIL WAFER,#8 X 1/ – Part Number: 83245
SCREW,PHIL WAFER,#8 X 1/
PartSelect #: PS4271931
Manufacturer #: 83245
  No Longer Available
Control Lamb – Part Number: 00067840
Control Lamb
PartSelect #: PS8693104
Manufacturer #: 00067840
  No Longer Available
BAND – Part Number: 00080123
BAND
PartSelect #: PS8693166
Manufacturer #: 00080123
  No Longer Available
Housing – Part Number: 00085388
Housing
PartSelect #: PS8693260
Manufacturer #: 00085388
  No Longer Available
Bracket – Part Number: 67815
Bracket
PartSelect #: PS16577320
Manufacturer #: 67815
  No Longer Available
COOKING PLATE, MICROWAVE – Part Number: 67822
COOKING PLATE, MICROWAVE
PartSelect #: PS17897022
Manufacturer #: 67822
  No Longer Available

Questions And Answers for 143840601

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
It was the heat safety switch in the old drive motor
It was fairly easy a few tight spaces to reach in but all in all it was pretty straight forward
Parts Used:
Belt Drive Motor Kit with Capacitor
  • Andrew from HATTIESBURG, MS
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer Had A Continuous Moan And Vibration
I disconnected the drive belt from the motor and ran the motor to isolate it from the rest of the mechanisms. This was the noise. I disconnected the water lines and electrical cord,laid the machine front down. I disconnected the motor plug,removed the two bracket to body bolts and lifted the motor out to the bench. I then transferred the bracket to the new motor and reversed the procedure to install the motor. The most difficult part was raising the machine back up alone,I suggest a helper.
Parts Used:
Belt Drive Motor Kit with Capacitor
  • Roger from Millis, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Wrench set
Was this instruction helpful to you?
Thank you for voting!