Models > 13AX90YT001 > Instructions

13AX90YT001 (2010) Yard Man Lawn Tractor - Instructions

All Instructions for the 13AX90YT001

upper transmission belt cracked bad

Removed battery, then battery hanger brackets.
Removed the tension spring from under side of seat. That was a little tuff to do. put a long phillips screw driver through transmission pulley.
put a 7/8 box wrench on pulley nut and removed it. took old belt off and installed new one. Reversed order of removal.
Getting the tension spring back into the bracket hole was a little tricky. I used a pair of long needle nose pliers to re install the spring.
cut my yard and I'm a happy camper !!!!!!!!!!!!!!!!!!

Parts Used:

V-Belt

William from TRIANGLE, VA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Wrench set

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Blade got bend after hit a stump so had to buy new spindle shaft

The repair was a very easy.

Parts Used:

Shaft-blade Spindl

Randall from GALLIPOLIS, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

5 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Mixer began to make a noise on speed two and higher

We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it does not make the slight howl sound.

Parts Used: