Models > 13AT61RH048

13AT61RH048 (1L137H10100) Toro Lawn Tractor - Overview

Sections of the 13AT61RH048

[Viewing 21 of 21]
Keep searches simple, eg. "belt" or "pump".
Aluminum Push Rod – Part Number: 690982
Aluminum Push Rod
PartSelect #: PS9073139
Manufacturer #: 690982
This is a replacement push rod for your lawn tractor engine. It is made of aluminum and is the push rod used for the exhaust valve. Occasionally, the push rod in your engine can become damaged, and wi...
$8.97
  In Stock
Order within the next 8 hrs and your part ships today!
Rod-Push (Steel) – Part Number: 690981
Rod-Push (Steel)
★★★★★
★★★★★
(1)
PartSelect #: PS9062983
Manufacturer #: 690981
This is a replacement steel push rod for your lawn tractor engine. The engine will have two push rods; one made of steel, and one made of aluminum. This part is made of steel and is approximately 6 in...   No Longer Available
Gasket-Rocker Cover – Part Number: 690971
Gasket-Rocker Cover
★★★★★
★★★★★
(1)
PartSelect #: PS9062980
Manufacturer #: 690971
$7.89
  Special Order
Gasket-CylinderHead – Part Number: 693997
Gasket-CylinderHead
PartSelect #: PS9067184
Manufacturer #: 693997
This is a replacement cylinder head gasket for your small engine. The gasket is approximately 5 inches in length and 5 inches in width at its longest and widest points. The gasket creates a seal, and ...
$28.12
  In Stock
Order within the next 8 hrs and your part ships today!
Seal--Oil (PTO Side) – Part Number: 795387
Seal--Oil (PTO Side)
★★★★★
★★★★★
(2)
PartSelect #: PS9151828
Manufacturer #: 795387
This OEM Seal-Oil (PTO Side), also called the Oil Seal, is a Black, Nitrile Rubber, 2/14 O.D., individually sold part which is installed using a Seal Puller. Customers rate the installation difficulty...
$8.13
  In Stock
Order within the next 8 hrs and your part ships today!
Cylinder Head – Part Number: 796231
Cylinder Head
PartSelect #: PS9152257
Manufacturer #: 796231
This is a replacement cylinder head kit for your small engine. It contains everything you will need to replace a damaged cylinder head. This is a 12-piece kit that is sold as a unit. This is an OEM pa...   No Longer Available
Seal-O Ring – Part Number: 691917
Seal-O Ring
★★★★★
★★★★★
(1)
PartSelect #: PS9294749
Manufacturer #: 691917
The Seal-O Ring, also known as the gasket, is red in color, made of rubber, and is an OEM part that requires some skill to replace. This part is designed to create a seal between the carburator and ma...
$4.66
  In Stock
Order within the next 8 hrs and your part ships today!
Gasket-Exhaust – Part Number: 690970
Gasket-Exhaust
PartSelect #: PS9063564
Manufacturer #: 690970
$5.14
  Special Order
Crankcase Gasket With Bolts – Part Number: 594195
Crankcase Gasket With Bolts
PartSelect #: PS11829358
Manufacturer #: 594195
This genuine crankcase gasket is used on small lawn and garden engines. Its purpose is to make an air tight seal so that no air/oil leakage occurs. Over time this gasket will deteriorate and will need...
$38.90
  In Stock
Order within the next 8 hrs and your part ships today!
Cylinder Head – Part Number: 796232
Cylinder Head
★★★★★
★★★★★
(1)
PartSelect #: PS9140434
Manufacturer #: 796232
This is the replacement cylinder head for your small engine. This is a 15-piece kit that will allow you to rebuild the cylinder head for the engine on your outdoor power equipment. The cylinder head i...   No Longer Available
Carburetor Overhaul Kit – Part Number: 797890
Carburetor Overhaul Kit
PartSelect #: PS9138632
Manufacturer #: 797890
This carburetor overhaul kit is a manufacturer-approved kit which contains replacement parts for your outdoor power equipment engine. The kit includes gaskets, o-rings, and diaphragms needed to perfor...
$107.73
  In Stock
Order within the next 8 hrs and your part ships today!

Questions And Answers for 13AT61RH048

Be the first to ask our experts a question about this model!

Common Symptoms of the 13AT61RH048

[Viewing 1 of 1]
Engine misfires
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
the head blew a vaulve guide destoying push rods
about 6 hours to tear down and replace don't do it in the hot sun needed more breaks takes longer, but the new factory heads did it started up 185 lbs of compression almost back to new, so much more power than old one's. FYI take off the motor cover every year clean out the debris (grass-mouse nest- and oil) it blocks the air and COOKS THE HEAD it only takes short time and will make that motor last a little longer but it is a BRIGGS engine
Parts Used:
Cylinder Head Cylinder Head Aluminum Push Rod Rod-Push (Steel)
  • Robert from WHITMAN, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    More than 2 hours
13 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Engine quit due to valve guide sliding out causing rocker arm to be immovable resulting in bent push rods.
Clean engine with a Gunk type product. Remove valve cover. Loosen bolts and remove old cylinder head. One bolt is located inside valve cover area. Remove old gasket and inspect and clean that surface. Attach new head with new gasket using existing bolts. Torque to 18'#s with a cross type pattern. Attach new rocker arms and push rods. Set valve clearance to .004 - .006. Attach valve cover with gasket. Check oil level. Start and let it warm up. Let cool remove cover then check valve clearance again. Replace cover.
Parts Used:
Cylinder Head
  • D from HUNTSVILLE, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Socket set
9 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lost my main jets while cleaning old gas from carb.
I removed the fan shroud, the carb/manifold as an assembly,turned the carb upside down and removed the fuel bowl. I replaced only one jet. Not until this moment did I discover their were two jets in this nikki carb. I now have a second jet ordered and will install it Friday,hopefully. These jets are two different part numbers as one is a left jet and the other is a right one. Be careful when opening the fuel bowl as these jets are held in their bores by small O-rings, and nothing else. The brigg's and Stratton part numbers are 791501 for the left jet and 791502 for the right.
Parts Used:
Jet--Main (Standard)
  • dan from EASTPORT, ME
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench set
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!