12AV569N766 (2005) Troy-Bilt Lawn Mower - Overview
Sections of the 12AV569N766
[Viewing 2 of 2]_WW_1.gif "Page A Diagram and Parts List for 2005 Troy-Bilt Lawn Mower")
_WW_2.gif "Page B Diagram and Parts List for 2005 Troy-Bilt Lawn Mower")
Keep searches simple, eg. "belt" or "pump".
WHEEL-GEAR 8-INCH INTE
PartSelect #: PS19272260
Manufacturer #: 734-04018C
This is a genuine OEM replacement part, it is sold individually.
This is the front wheel on the models shown below.
There are two of them on each mower.
The wheel has a ring gear on the inside whic...
$30.12
On Order
Mulching Blade
PartSelect #: PS9169783
Manufacturer #: 942-0741A
This authentic replacement blade is manufactured for use with Craftsman walk-behind lawnmowers and is designed to deliver clean, efficient cuts. Measuring 21 inches in length, the blade features an an...
$34.74
In Stock
Lawn Mower Control Handle
PartSelect #: PS9113457
Manufacturer #: 747-1161A-0637
The Control Handle is an OEM, metal, black handle used to control the engine. It attaches onto the handle assembly of the mower. If broken you will no longer be able to control the engine, and the par...
$21.16
In Stock
Lawn Mower Hex Washer Head Screw
PartSelect #: PS9298768
Manufacturer #: 710-0599
This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part ...
$6.40
In Stock
Bell Blade Support
PartSelect #: PS17055954
Manufacturer #: 736-0524B-1
The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation ...
$6.40
In Stock
Lawn Mower Drive Belt
PartSelect #: PS9186153
Manufacturer #: 954-0637A
This walk-behind mower drive belt transfers power from the engine pulley to the transmission, allowing the self-propelled front wheels to move the mower forward. Replacing a worn or stretched belt hel...
$18.22
In Stock
Lawn Mower Variable Speed Cable
PartSelect #: PS9167632
Manufacturer #: 946-04206A
This variable-speed drive engagement cable is designed to control forward motion on walk-behind lawn mowers by linking the operator control to the drive system. It allows smooth engagement and speed a...
$38.76
In Stock
Nut-flglk
PartSelect #: PS9299574
Manufacturer #: 712-04064
Also referred to as a Lock Nut or Flange Lock, this nut is designed for use with various lawn and garden equipment. The purpose of this part is to hold parts in place while resisting loosening when pr...
$6.40
In Stock
Control Cable - B&s
PartSelect #: PS16463795
Manufacturer #: 946-0957
This is an authentic replacement part sourced directly from the manufacturer. The mower cable is commonly found in Craftsman lawn mowers. This is a metal cable with a flexible plastic casing, and it...
$25.04
Special Order
Side Discharge Deflector
PartSelect #: PS9101143
Manufacturer #: 731-04177
The Side Discharge Deflector, also known as a discharge chute, is a black plastic part used to direct glass clippings out from under the deck of the mower. This manufacturer-certified part has been ra...
$30.26
In Stock
Screw Hex.wash.hd
PartSelect #: PS9090945
Manufacturer #: 710-1652
This item is a genuine OEM replacement part that is intended to be used with snowthrowers and lawnmowers from Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, and Yard-Man. The metal hex head screw is us...
$6.40
In Stock
Screw Shldr..30x46
PartSelect #: PS9090943
Manufacturer #: 710-1650
This is a Genuine Manufacturer Approved replacement part used on a variety of Lawn and Garden Equipment. This screw has different applications depending on your equipment. This item is made out of Met...
$6.47
In Stock
Common Symptoms of the 12AV569N766
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
wheels falling down
lift mower up on angle, sip beer. took the cotter pin out of both sides. Finished beer. try to figure out how they go on, opened another beer. Figured it out, put cotter pin back on lowered the mower, drank on the new beer. Wheels adjusted just fine.. Thanks...
Parts Used:
-
Phil from SAINT CHARLES, MO
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
7 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Not the exact fit
I had to drill and tap the ends of the axle and put a 1/4” bolt in to fasten the wheels. The hubs were not the same. They fastened differently.
Parts Used:
-
Jay from GERRY, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front drive wheels were wore out
-
Ronald from WAYNE, MI
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!