Models > 12AV565Q711

12AV565Q711 (2007) Troy-Bilt Lawn Mower - Overview

Sections of the 12AV565Q711

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Front Lawn Mower Drive Wheel – Part Number: 734-04018C
Front Lawn Mower Drive Wheel
★★★★★
★★★★★
(10)
PartSelect #: PS9455101
Manufacturer #: 734-04018C
This is a genuine OEM replacement part, it is sold individually. This is the front wheel on the models shown below. There are two of them on each mower. The wheel has a ring gear on the inside whic...
  No Longer Available
Mulching Blade – Part Number: 942-0741A
Mulching Blade
PartSelect #: PS9169783
Manufacturer #: 942-0741A
This is an authentic replacement part manufactured for use with Craftsman walk-behind lawnmowers. The blade is angled to allow the clippings to rotate through the cutting deck to produce fine clipping...
$32.37
  In Stock
Lawn Mower Zone Control Cable – Part Number: 946-1130
Lawn Mower Zone Control Cable
★★★★★
★★★★★
(2)
PartSelect #: PS9180334
Manufacturer #: 946-1130
This zone control cable is for lawn mowers. Zone control cable stops the engine when you let go of the handle. Wear work gloves to protect your hands during this repair.
$17.50
  In Stock
Control Handle – Part Number: 747-1161A-0637
Control Handle
PartSelect #: PS9113457
Manufacturer #: 747-1161A-0637
The Control Handle is an OEM, metal, black handle used to control the engine. It attaches onto the handle assembly of the mower. If broken you will no longer be able to control the engine, and the par...
$12.90
  In Stock
TT Screw 1/4-20 x 0.5 – Part Number: 710-0599
TT Screw 1/4-20 x 0.5
PartSelect #: PS9298768
Manufacturer #: 710-0599
$4.99
  In Stock
Bell Blade Support – Part Number: 736-0524B-1
Bell Blade Support
PartSelect #: PS17016260
Manufacturer #: 736-0524B-1
The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation ...
$5.84
  In Stock
Nut, Flange Lock, 3/8-16, Grf – Part Number: 712-04065
Nut, Flange Lock, 3/8-16, Grf
PartSelect #: PS9095080
Manufacturer #: 712-04065
Designed for use in various models of lawn and garden equipment, this part is not sold as part of a kit or assembly. It is made of metal, is gold in color, and is sold individually. This part may also...
$3.99
  In Stock
Cable Control – Part Number: 946-0957
Cable Control
★★★★★
★★★★★
(3)
PartSelect #: PS9461502
Manufacturer #: 946-0957
  No Longer Available
Variable Speed Cable – Part Number: 946-04206A
Variable Speed Cable
★★★★★
★★★★★
(1)
PartSelect #: PS9167632
Manufacturer #: 946-04206A
$26.01
  In Stock
Side Discharge Deflector – Part Number: 731-04177
Side Discharge Deflector
PartSelect #: PS10005504
Manufacturer #: 731-04177
The Side Discharge Deflector, also known as a discharge chute, is a black plastic part used to direct glass clippings out from under the deck of the mower. This manufacturer-certified part has been ra...
$18.44
  In Stock
TT Screw 1/4-14 x .625 – Part Number: 710-1652
TT Screw 1/4-14 x .625
PartSelect #: PS10001918
Manufacturer #: 710-1652
$4.99
  In Stock
Shoulder Screw # 12 -24 – Part Number: 710-1650
Shoulder Screw # 12 -24
★★★★★
★★★★★
(1)
PartSelect #: PS9090943
Manufacturer #: 710-1650
$4.99
  In Stock

Questions And Answers for 12AV565Q711

Be the first to ask our experts a question about this model!

Common Symptoms of the 12AV565Q711

[Viewing 1 of 1]
Mower blade does not cut
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Cable was frozen and bail was broken
I removed the bail and removed cable from motor! Then it was ready for new parts installation!
I attached the cable to the motor and I put the right side of bail in its hole and I then installed cable into the bail and then installed the left side of bail into its hole!! Once that was completed I used two zip ties to cinch down cable to the handle!! Job done!
Parts Used:
Blade Control Cable - B&S (40.75&#34) Control Handle
  • Charles from MIDVALE, OH
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The treads on the front drive wheels were worn down to the point that they provided little traction.
Removed a single nut on each end of the drive shaft with the appropriate socket. Wheels then slipped off. Cleaned/polished the shaft with fine sandpaper, lubed with silicone spray, slid on the wheels and reinstalled the nuts with the same socket. Wheels were an exact fit and OEM quality. Done in 15 minutes start to finish.
Parts Used:
Front Lawn Mower Drive Wheel
  • MICHAEL from Kennewick, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front drive wheels were wore out
Unbolted old wheels and bolted new wheels to my lawn mower
Parts Used:
Front Lawn Mower Drive Wheel
  • Ronald from WAYNE, MI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!