Models > 12AS569O063

12AS569O063 (2003) Troy-Bilt Lawn Mower - Overview

Sections of the 12AS569O063

[Viewing 1 of 1]
Page A Diagram and Parts List for 2003 Troy-Bilt Lawn Mower
Page A
Keep searches simple, eg. "belt" or "pump".
Front Lawn Mower Drive Wheel – Part Number: 734-04018C
Front Lawn Mower Drive Wheel
★★★★★
★★★★★
(10)
PartSelect #: PS9455101
Manufacturer #: 734-04018C
This is a genuine OEM replacement part, it is sold individually. This is the front wheel on the models shown below. There are two of them on each mower. The wheel has a ring gear on the inside whic...
  No Longer Available
Mulching Blade – Part Number: 942-0741A
Mulching Blade
PartSelect #: PS9169783
Manufacturer #: 942-0741A
This is an authentic replacement part manufactured for use with Craftsman walk-behind lawnmowers. The blade is angled to allow the clippings to rotate through the cutting deck to produce fine clipping...
$32.37
  In Stock
TT Screw 1/4-20 x 0.5 – Part Number: 710-0599
TT Screw 1/4-20 x 0.5
PartSelect #: PS9298768
Manufacturer #: 710-0599
$4.99
  In Stock
Bell Blade Support – Part Number: 736-0524B-1
Bell Blade Support
PartSelect #: PS17016260
Manufacturer #: 736-0524B-1
The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation ...
$5.84
  In Stock
Belt-3L x 31.25" – Part Number: 954-0637A
Belt-3L x 31.25"
PartSelect #: PS9186153
Manufacturer #: 954-0637A
$15.90
  In Stock
Side Discharge Deflector – Part Number: 731-04177
Side Discharge Deflector
PartSelect #: PS10005504
Manufacturer #: 731-04177
The Side Discharge Deflector, also known as a discharge chute, is a black plastic part used to direct glass clippings out from under the deck of the mower. This manufacturer-certified part has been ra...
$18.44
  In Stock
Shoulder Screw # 12 -24 – Part Number: 710-1650
Shoulder Screw # 12 -24
★★★★★
★★★★★
(1)
PartSelect #: PS9090943
Manufacturer #: 710-1650
$4.99
  In Stock
Rear Wheel, 12 X 2.125 S-Wave – Part Number: 734-04019
Rear Wheel, 12 X 2.125 S-Wave
PartSelect #: PS9455102
Manufacturer #: 734-04019
  No Longer Available
Grass Catcher Frame – Part Number: 747-04080A
Grass Catcher Frame
PartSelect #: PS9455727
Manufacturer #: 747-04080A
  No Longer Available
Pin-Hinge – Part Number: 747-0710A
Pin-Hinge
PartSelect #: PS9455906
Manufacturer #: 747-0710A
This hinge pin is an OEM part that is designed to hold the chute to the bracket of your lawn mower, allowing the shute to move upward and downward. It is silver, made of metal, and it is around 5 inch...
  No Longer Available
Star Knob 5/16-18 – Part Number: 720-04072A
Star Knob 5/16-18
PartSelect #: PS9109078
Manufacturer #: 720-04072A
This Star Knob, which may also be simply referred to as a Knob, is sourced directly from the manufacturer for use in lawn mowers and snow blowers. This part provides a quick-release for handles to fol...
$6.64
  In Stock
Lawn Mover Grasscatcher Bag – Part Number: 964-04007A
Lawn Mover Grasscatcher Bag
PartSelect #: PS9312782
Manufacturer #: 964-04007A
This grass bag is a genuine manufacturer sourced replacement item. It is commonly used on a variety of walk-behind lawn mowers. It is designed to collect the grass trimmings for easy disposal. It is m...
$128.09
  In Stock
View More
Back to Top

Questions And Answers for 12AS569O063

Be the first to ask our experts a question about this model!

Back to Top

Common Symptoms of the 12AS569O063

[Viewing 1 of 1]
Mower blade does not cut
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The treads on the front drive wheels were worn down to the point that they provided little traction.
Removed a single nut on each end of the drive shaft with the appropriate socket. Wheels then slipped off. Cleaned/polished the shaft with fine sandpaper, lubed with silicone spray, slid on the wheels and reinstalled the nuts with the same socket. Wheels were an exact fit and OEM quality. Done in 15 minutes start to finish.
Parts Used:
Front Lawn Mower Drive Wheel
  • MICHAEL from Kennewick, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front drive wheels were wore out
Unbolted old wheels and bolted new wheels to my lawn mower
Parts Used:
Front Lawn Mower Drive Wheel
  • Ronald from WAYNE, MI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Not the exact fit
I had to drill and tap the ends of the axle and put a 1/4” bolt in to fasten the wheels. The hubs were not the same. They fastened differently.
Parts Used:
Front Lawn Mower Drive Wheel
  • Jay from GERRY, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top