12AKD39V897 MTD Lawn Mower - Overview
Models starting with 12AKD39V897
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
CHUTE-SIDE DISCHAR
PartSelect #: PS19269737
Manufacturer #: 731-07131
The Side Discharge Chute is a manufacturer certified black plastic part used to direct glass clippings out from unde the deck of the mower, which is rated as "Easy" to install. If broken or damaged, i...
$24.77
Special Order
Lawn Mower Trail Shield
PartSelect #: PS9103444
Manufacturer #: 731-07203
This trail shield, also referred to as a rear skirt, is designed for use with various makes and models of lawn mowers and is a genuine OEM part. This trail shield is sold as an individual part without...
$16.86
In Stock
CABLE-CONTROL 37.5
PartSelect #: PS19305064
Manufacturer #: 946-04661A
This control cable is designed for walk-behind lawn mowers to safely engage and disengage the blade during operation. Constructed with a durable metal inner cable and a protective rubberized outer she...
$21.29
On Order
Bell Blade Support
PartSelect #: PS17055954
Manufacturer #: 736-0524B-1
The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation ...
$6.40
In Stock
Screw
PartSelect #: PS12664831
Manufacturer #: 710-04995A
This replacement screw is a genuine item that is sourced from original equipment manufacturer. It is a high quality hardware that is commonly used with walk-behind lawn mowers. This screw has multiple...
$6.47
In Stock
Nut-flglk
PartSelect #: PS9299574
Manufacturer #: 712-04064
Also referred to as a Lock Nut or Flange Lock, this nut is designed for use with various lawn and garden equipment. The purpose of this part is to hold parts in place while resisting loosening when pr...
$6.40
In Stock
Screw, 3/8-24 x 1.50 (w/25mm Blade Adapter)
PartSelect #: PS9088496
Manufacturer #: 710-1044
The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of meta...
$6.40
In Stock
Shoulder Screw
PartSelect #: PS16420619
Manufacturer #: 738-04419A
This shoulder screw is sourced directly from original equipment manufacturer. It is an authentic item specially designed for use with a variety of lawn and garden equipment. It is commonly used to sec...
$6.47
Special Order
Screw-carriage 5/1
PartSelect #: PS9298717
Manufacturer #: 710-04998
This genuine screw is supplied directly from the original equipment manufacturer for use with Craftsman walk-behind lawn mowers and snowblowers. Check the diagrams for your model to ensure the correct...
$8.76
In Stock
Hinge Pine
PartSelect #: PS9302734
Manufacturer #: 747-0710A
This hinge pin is an OEM part that is designed to hold the chute to the bracket of your lawn mower, allowing the shute to move upward and downward. It is silver, made of metal, and it is around 5 inch...
$6.40
In Stock
Nut-square 1/4-20
PartSelect #: PS9093635
Manufacturer #: 712-04222
It is an authentic high quality piece of hardware commonly utilized on walk behind lawn mowers. This nut is supplied directly from original equipment manufacturer. It is generally used to secure the t...
$8.55
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
I replaced the deck on my Craftsman Lawn Mower, and needed a new water nozzle and some screws to hold the front wheel assembly on.
I removed the rear wheels, then I removed the blade, then the motor, then the front wheel assembly. The bolts holding the front wheel assembly were rusted and rounded trying to remove them, so I cut them out with a grinder. Afterwards I removed the remainder of the screw with a pair of pliers. I also removed the Water jet cleanout nozz
... Read more
le, found it was cracked, ordered the part from PartSelect, along with the screws needed to attach the front wheel assembly. I cleaned the remaining parts and re installed them onto the new deck. First, I installed the front wheel assembly, then the motor, then sat the mower upright, installed the blade, then took the rear wheel assembly and aligned it and fastened it to the deck. Last piece was the water nozzle. I placed it in the recess for it, and fastened it with the bolt. Then I tested the mower, and it worked without issue. Afterwards I used the new clean out port to rinse the underside of the deck, and it worked well.
Read less
Parts Used:
-
Dan from LAKEWOOD, OH
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lost wing knob and nut that holds the handle onto the mower
Can't do the repair. You sent me the two wing knobs I ordered, but no nuts. No one sells the nuts. I've driven all over trying to find them. Wasted my money and a lot of time. Zip ties are holding the handle on. I sent an email to customer service asking for the nuts, never heard a word from anyone. Another great example of how no
... Read more
t to run a business.
Read less
Parts Used:
-
Paul from NIXA, MO
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
2 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!