12A-A25U711 Troy-Bilt Lawn Mower - Overview
Models starting with 12A-A25U711
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Mulching Blade
PartSelect #: PS9169783
Manufacturer #: 942-0741A
This authentic replacement blade is manufactured for use with Craftsman walk-behind lawnmowers and is designed to deliver clean, efficient cuts. Measuring 21 inches in length, the blade features an an...
$33.94
In Stock
Grass Catcher Frame Assembly
PartSelect #: PS9988561
Manufacturer #: 647-04271-0637
Are you tired of a disorganized freezer? We've got the perfect solution for you - a genuine LG Tray Assembly, Drawer. Crafted with impeccable precision, this tray assembly helps breathe new life into ...
$57.53
In Stock
CHUTE-SIDE DISCHAR
PartSelect #: PS19269737
Manufacturer #: 731-07131
The Side Discharge Chute is a manufacturer certified black plastic part used to direct glass clippings out from unde the deck of the mower, which is rated as "Easy" to install. If broken or damaged, i...
$24.20
Special Order
Lawn Mower Trail Shield
PartSelect #: PS9103444
Manufacturer #: 731-07203
This trail shield, also referred to as a rear skirt, is designed for use with various makes and models of lawn mowers and is a genuine OEM part. This trail shield is sold as an individual part without...
$16.47
In Stock
Bell Blade Support
PartSelect #: PS17055954
Manufacturer #: 736-0524B-1
The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation ...
$6.25
In Stock
Screw
PartSelect #: PS12664831
Manufacturer #: 710-04995A
This replacement screw is a genuine item that is sourced from original equipment manufacturer. It is a high quality hardware that is commonly used with walk-behind lawn mowers. This screw has multiple...
$6.32
In Stock
Cover-wheel Dust
PartSelect #: PS9114696
Manufacturer #: 731-07240A
This is a Manufacturer Approved replacement part used on a variety of Lawn Mowers. This part is made out of Plastic and it is Sold Individually. This plastic Cover helps to keep dirt and debris away from Wheel and gears.
$9.27
In Stock
Nut-flglk
PartSelect #: PS9299574
Manufacturer #: 712-04064
Also referred to as a Lock Nut or Flange Lock, this nut is designed for use with various lawn and garden equipment. The purpose of this part is to hold parts in place while resisting loosening when pr...
$6.25
In Stock
Screw, 3/8-24 x 1.50 (w/25mm Blade Adapter)
PartSelect #: PS9088496
Manufacturer #: 710-1044
The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of meta...
$6.25
In Stock
Common Symptoms of models starting with 12A-A25U711
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Although the Original deck was rusted and collapsing , the mower was extremely reliable.
Anyone attempting this probably doesn’t need my tutorial but I would add this: closely inspect, clean and repair or replace any hardware as needed. You’ll be glad you did.
Parts Used:
-
Douglas from LANGHORNE, PA
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Socket set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I replaced the deck on my Craftsman Lawn Mower, and needed a new water nozzle and some screws to hold the front wheel assembly on.
I removed the rear wheels, then I removed the blade, then the motor, then the front wheel assembly. The bolts holding the front wheel assembly were rusted and rounded trying to remove them, so I cut them out with a grinder. Afterwards I removed the remainder of the screw with a pair of pliers. I also removed the Water jet cleanout nozz
... Read more
le, found it was cracked, ordered the part from PartSelect, along with the screws needed to attach the front wheel assembly. I cleaned the remaining parts and re installed them onto the new deck. First, I installed the front wheel assembly, then the motor, then sat the mower upright, installed the blade, then took the rear wheel assembly and aligned it and fastened it to the deck. Last piece was the water nozzle. I placed it in the recess for it, and fastened it with the bolt. Then I tested the mower, and it worked without issue. Afterwards I used the new clean out port to rinse the underside of the deck, and it worked well.
Read less
Parts Used:
-
Dan from LAKEWOOD, OH
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My mower deck rotted out.
I purchased a new deck and it was a perfect fit thanks to the woman that I spoke with on the phone. And the price was great along with the shipping. Thanks for everything.
Parts Used:
-
STEPHEN from ROME, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!