12A-266A766 (2004) Troy-Bilt Lawn Mower - Overview
Sections of the 12A-266A766
[Viewing 1 of 1]_WW_1.gif "Page A Diagram and Parts List for 2004 Troy-Bilt Lawn Mower")
Keep searches simple, eg. "belt" or "pump".
WHEEL-GEAR 8-INCH INTE
PartSelect #: PS19272260
Manufacturer #: 734-04018C
This is a genuine OEM replacement part, it is sold individually.
This is the front wheel on the models shown below.
There are two of them on each mower.
The wheel has a ring gear on the inside whic...
$30.12
On Order
Lawn Mower Control Handle
PartSelect #: PS9113457
Manufacturer #: 747-1161A-0637
The Control Handle is an OEM, metal, black handle used to control the engine. It attaches onto the handle assembly of the mower. If broken you will no longer be able to control the engine, and the par...
$21.16
In Stock
Lawn Mower Hex Washer Head Screw
PartSelect #: PS9298768
Manufacturer #: 710-0599
This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part ...
$6.40
In Stock
Bell Blade Support
PartSelect #: PS17055954
Manufacturer #: 736-0524B-1
The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation ...
$6.40
In Stock
Screw, 3/8-24 x 1.50 (w/25mm Blade Adapter)
PartSelect #: PS9088496
Manufacturer #: 710-1044
The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of meta...
$6.40
On Order
Lawn Mower Blade Control Cable
PartSelect #: PS9311847
Manufacturer #: 946-1132
Genuine OEM replacement part, this item is sold individually. The Blade Control Cable is the cable that stops the blade when the control handle is released on Walk-Behind Mowers. This part has Z bend ...
$31.82
In Stock
KIT- WHL IDLE 8 X
PartSelect #: PS19283939
Manufacturer #: 753-08091
8 x 2.125
This wheel is for lawn mowers.
Wear work gloves to protect your hands when installing this part.
$66.47
Special Order
Hinge Pine
PartSelect #: PS9302734
Manufacturer #: 747-0710A
This hinge pin is an OEM part that is designed to hold the chute to the bracket of your lawn mower, allowing the shute to move upward and downward. It is silver, made of metal, and it is around 5 inch...
$6.40
In Stock
Snow Blower Star Knob
PartSelect #: PS9109078
Manufacturer #: 720-04072A
This Star Knob, which may also be simply referred to as a Knob, is sourced directly from the manufacturer for use in lawn mowers and snow blowers. This part provides a quick-release for handles to fol...
$10.88
In Stock
Spring-torsion
PartSelect #: PS9104436
Manufacturer #: 732-1014C
This is a genuine manufacturer approved replacement mulching door torsion spring designed for use with lawn mowers. It allows for the mulching door to retract. This torsion spring is made out of metal...
$11.36
In Stock
Pin Dowel
PartSelect #: PS9154232
Manufacturer #: 915-0221
This is an authentic item that is supplied by the original equipment manufacturer for use with walk-behind lawn mowers. It provides an identical replacement for a missing or a faulty dowel pin that wa...
$6.40
In Stock
Wiong Nut
PartSelect #: PS9096328
Manufacturer #: 720-0279
This is a type of handle with a knob-shaped grip used in a variety of lawn and garden tools with adjustable features. This genuine OEM part is 0.8 x 0.2 x 1 inches and is made from plastic. It is desi...
$7.04
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Cable was frozen and bail was broken
I removed the bail and removed cable from motor! Then it was ready for new parts installation!
I attached the cable to the motor and I put the right side of bail in its hole and I then installed cable into the bail and then installed the left side of bail into its hole!! Once that was completed I used two zip ties to cinch down cab ... Read more le to the handle!! Job done!
I attached the cable to the motor and I put the right side of bail in its hole and I then installed cable into the bail and then installed the left side of bail into its hole!! Once that was completed I used two zip ties to cinch down cab ... Read more le to the handle!! Job done!
Read less
Parts Used:
-
Charles from MIDVALE, OH
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Not the exact fit
I had to drill and tap the ends of the axle and put a 1/4” bolt in to fasten the wheels. The hubs were not the same. They fastened differently.
Parts Used:
-
Jay from GERRY, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front drive wheels were wore out
-
Ronald from WAYNE, MI
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!