12527HVX Snow Blower - Overview
Models starting with 12527HVX
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Starter Pawl-Ratchet
PartSelect #: PS8942598
Manufacturer #: 281505S
The manufacturer-approved Ratchet Pawl (Starter Pawl) comes in a set of two (2). This part attaches inside the recoil assembly, and is used to engage the flywheel. if broken due to wear/damage it will...
$6.25
In Stock
Pulley/spring Assembly
PartSelect #: PS8988822
Manufacturer #: 498144
Upgrade your equipment with this reliable Pulley/Spring Assembly from Briggs and Stratton. Known for their superior quality, Briggs and Stratton parts are designed to help prolong the life of your mac...
$24.95
In Stock
Plate-pawl Friction
PartSelect #: PS9074726
Manufacturer #: 692299
This is a genuine OEM sourced replacement part. It is designed for use with lawn and garden engines. It is an important part of the starter assembly that is used to crank start the unit. Please note s...
$6.25
On Order
Snow Blower Chute
PartSelect #: PS11824789
Manufacturer #: 585056901
This chute base, also known as a discharge chute base, is sourced from the original manufacturer for use with snowblowers. It is found at the end of the discharge chute which is responsible for direct...
$16.52
In Stock
Fuel Tank
PartSelect #: PS9141053
Manufacturer #: 799863
This genuine fuel tank assembly is sourced directly from the original equipment manufacturer and is specifically designed for use with Briggs & Stratton engines on lawn and garden equipment. It serves...
$103.95
In Stock
Seal-oil
PartSelect #: PS8948679
Manufacturer #: 299819S
This OEM Oil Seal is an individually sold rubber part which is attached around the axis shaft on the crankcase housing to provide a proper seal. A broken seal will lead to a leak, and the part should ...
$7.30
In Stock
Plug-spark Ems
PartSelect #: PS9062708
Manufacturer #: 691043
This spark plug is an authentic OEM replacement part, it is not an aftermarket equivalent. It is specially made for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equi...
$8.02
In Stock
Screw
PartSelect #: PS9064541
Manufacturer #: 691108
This is an authentic OEM sourced replacement part that is intended to be used with lawnmower engines and outboard motors from Briggs & Stratton and Toro. The metal screw is used to secure the rocker c...
$6.25
In Stock
Engine Muffler Guard Screw
PartSelect #: PS9295215
Manufacturer #: 699854
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. This replacement screw...
$6.25
In Stock
Hose-vacuum
PartSelect #: PS9306672
Manufacturer #: 791766
This genuine part is sourced directly from the original equipment manufacturer. It is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The p...
$10.35
In Stock
Engine Dipstick Tube Seal
PartSelect #: PS9274579
Manufacturer #: 281370S
This item is a genuine replacement part that has been OEM sourced and is intended to be used with lawnmower engines from Briggs & Stratton and Toro. The rubber seal is used to prevent oil from leaking...
$10.72
In Stock
Lawn Mower Flangelock Hex Nut
PartSelect #: PS9022497
Manufacturer #: 532409149
Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carr...
$6.25
In Stock
Common Symptoms of models starting with 12527HVX
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Needed a couple washers and a spring broken drive sprocket
Machined new center hub for sprocket attatched it to sprocket restacked everything back together adjusted tracks going to change oil fire it up see how it all works
Parts Used:
-
STEVE from COLBERT, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Socket set
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Chunk of wood broke the lower plastic chute.
Removed belt cover. Unbolted upper chute mount and removed metal upper chute with cables still attached. Replaced plastic lower chute, 4 bolts and reassembled machine.
Parts Used:
-
Jason from Cummington, MA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
2 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!