123LD Husqvarna Edger - Overview
Sections of the 123LD
[Viewing 14 of 14]
Keep searches simple, eg. "belt" or "pump".
Chainsaw Primer Bulb
PartSelect #: PS9282918
Manufacturer #: 503936601
Genuine Husqvarna replacement part, this part is sold individually. The 503939601 Air Purge does just what the part name says. It purges the air out of the carburetor. Then it forces fuel from the fue...
$11.92
In Stock
Trimmer Oiled Air Filter
PartSelect #: PS9020811
Manufacturer #: 537186301
This ready-oiled air filter is an OEM part that traps dirt and debris, preventing them from entering the engine. This part is black, comprised of foam, and is sold individually. Your air filter may be...
$7.45
In Stock
Trimmer Hose
PartSelect #: PS9020992
Manufacturer #: 537042401
This OEM fuel line, or hose, is a 4-inch, clear, plastic tube which is sold individually. It is rated as "Easy" to install. This part connects to the purge assembly and delivers fuel to the carburetor...
$6.25
In Stock
Knob
PartSelect #: PS8993624
Manufacturer #: 502204001
The air cleaner knob, just over 1 inch in diameter, is black in color and made of plastic. It is sold individually, and its function is to tighten the air cleaner cover down on various lawn and garden...
$7.45
In Stock
Screw
PartSelect #: PS8985566
Manufacturer #: 502206503
This replacement screw is an authentic Husqvarna part. It is a genuine manufacturer approved part commonly used on a variety of power equipment including chainsaws, trimmers and sweepers. This standar...
$6.25
In Stock
Trimmer Starter Pawl Bridge
PartSelect #: PS9282878
Manufacturer #: 503873305
The Starter Pawl bridge provides the resistance needed for the starter rope to start the trimming engine. It is an OEM part that attaches inside the recoil assembly. If broken due to weaar or fatigue,...
$33.95
In Stock
Carburetor
PartSelect #: PS11824881
Manufacturer #: 588171156
This OEM carburetor mixes the air-fuel mixture to the proper ratio for combustion in your engine. This carburetor is sold individually, is silver in color and metal in material, and is located on the ...
$62.27
In Stock
Spark Plug
PartSelect #: PS8996057
Manufacturer #: 503235111
Compatible with over 150 models of lawn equipment, this Spark Plug has been sourced directly from the original manufacturer. It is sold individually, made of metal and ceramic components, and is not p...
$8.95
In Stock
Fuel Hose
PartSelect #: PS17016374
Manufacturer #: 581756205
This fuel hose is a genuine OEM part designed to deliver fuel from your fuel tank to the carburetor. Also known as the fuel line, it is black in color, made of rubber, sold individually, and can be at...
$19.42
In Stock
Screw
PartSelect #: PS8989054
Manufacturer #: 503216220
This is an authentic OEM sourced replacement screw designed for use with a variety of Husqvarna power equipment. It is a standard hardware which has multiple applications based on your tool. This part...
$6.25
In Stock
Choke Control
PartSelect #: PS8991758
Manufacturer #: 503962501
This is a genuine OEM part. The Husqvarna choke control is made for use with many lawn and garden trimmers. The plastic component is fastened to the carburetor, allowing the operator to manage the eng...
$10.45
In Stock
Questions And Answers for 123LD
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Would not start now runs great
-
JAMES from FAYETTEVILLE, AR
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Weed eater flooded constantly.
Very simple repair...took the old carburetor off and installed the new one. After replacement, the weed eater fired up after the second pull. Cover, removed 4 bolts. Carburetor, three bolts. Removed two hoses, choke handle and installed. Order gasket...never hurts to replace gaskets. One other thing, most important...use premix fuel!!! I
... Read more
use it in all gas powered equipment now. Cleaner and does not gum up filters and carburetor.
Read less
Parts Used:
-
Richard from CHINA GROVE, NC
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
5 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
part not same
Ordered on/off switch. My switch had only one wire terminal. Replacement had two. I ran a wire from one to a screw as a ground. Switch worked fine.
Parts Used:
-
Bruce from ALGOMA, WI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
4 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!