12213 - Overview
Models starting with 12213
Click on the best match to narrow your results.
- 12213 Troy-Bilt Cultivator (4.5 HP Tiller)
- 122132-0110-01 Briggs and Stratton Engine (Engine)
- 122132-0110-B8 Briggs and Stratton Engine (Engine)
- 122132-0110-E8 Briggs and Stratton Engine (Engine)
- 12213C (1986) MTD Lawn Mower (Self-Propelled Walk-Behind Mower)
- 12213S (1985) MTD Lawn Mower (Self-Propelled Walk-Behind Mower)
Keep searches simple, eg. "belt" or "pump".
Starter Pawl-Ratchet
PartSelect #: PS8942598
Manufacturer #: 281505S
The manufacturer-approved Ratchet Pawl (Starter Pawl) comes in a set of two (2). This part attaches inside the recoil assembly, and is used to engage the flywheel. if broken due to wear/damage it will...
$6.40
In Stock
Lawn Mower Ground Drive Belt
PartSelect #: PS9172714
Manufacturer #: 954-04032B
This genuine drive belt is an original replacement part sourced directly from the manufacturer and is commonly used in Craftsman lawn mowers and edgers. Made from flexible rubber, it transfers power f...
$32.55
In Stock
Lawn Mower Hex Washer Head Screw
PartSelect #: PS9298768
Manufacturer #: 710-0599
This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part ...
$6.40
In Stock
Plate-pawl Friction
PartSelect #: PS9074726
Manufacturer #: 692299
This is a genuine OEM sourced replacement part. It is designed for use with lawn and garden engines. It is an important part of the starter assembly that is used to crank start the unit. Please note s...
$6.40
On Order
Seal-oil
PartSelect #: PS8948679
Manufacturer #: 299819S
This OEM Oil Seal is an individually sold rubber part which is attached around the axis shaft on the crankcase housing to provide a proper seal. A broken seal will lead to a leak, and the part should ...
$7.47
In Stock
Tiller Forward Drive Belt
PartSelect #: PS10035467
Manufacturer #: 954-04090
The Forward Drive Belt is a 12.5-inch black, rubber belt, sold individually. Installation of this manufacturer-certified part is rated as "Easy" by customers and will require pliers, a socket set, and...
$28.56
In Stock
Screw
PartSelect #: PS9064541
Manufacturer #: 691108
This is an authentic OEM sourced replacement part that is intended to be used with lawnmower engines and outboard motors from Briggs & Stratton and Toro. The metal screw is used to secure the rocker c...
$6.40
In Stock
Starter-rewind
PartSelect #: PS9983381
Manufacturer #: 591301
Introducing the Starter-Rewind from Briggs and Stratton, tailored to ensure your engine starts up reliably every time. This component is designed for durability and strength, promising to endure rigor...
$67.63
In Stock
Clamp-hose
PartSelect #: PS9140678
Manufacturer #: 791850
This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Kee...
$6.40
In Stock
Wsh, Bell., .34 x .872 x .06
PartSelect #: PS9118681
Manufacturer #: 736-0242
Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between variou...
$6.74
In Stock
Exact Part matches for your search term
[Viewing 5 of 5]
8800 WIRING HARNS MOLEX
This part number matches the current model number 12213
PartSelect #: PS4257473
Manufacturer #: 12213
No Longer Available
Yoke, 3/8-6 Spl. As
This part number matches the current model number 12213
PartSelect #: PS9885170
Manufacturer #: 12213
No Longer Available
Resistor
This part number matches the current model number 12213
PartSelect #: PS12183733
Manufacturer #: 12213
No Longer Available
Handle
This part number matches the current model number 12213
PartSelect #: PS16266401
Manufacturer #: 12213
No Longer Available
AR Spring
This part number matches the current model number 12213
PartSelect #: PS18267989
Manufacturer #: 12213
No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bearing seized
Pull belt cover, 2 nuts
Remove tensioner, 1 nut
Slide old tensioner off and replace
Remove tensioner, 1 nut
Slide old tensioner off and replace
Parts Used:
-
Gary from ELGIN, OK
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Parts fit like a glove
Removed pull start assembly down to the crank. Installed motor housing, motor fan & rewind assembly. All went real good.
Parts Used:
-
Wayne from OOLTEWAH, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Socket set
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Starter Rewind broke internally-rope did not work
Removed old broken rewind starter (4 bolts); found the Model and Serial numbers; found Parts Direct and ordered new assembly; upon delivery, reinstalled with new Starter and hardware.
Parts Used:
-
Mark from N FRANKLIN, CT
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!