11A-B04A897 MTD Lawn Mower - Overview
Models starting with 11A-B04A897
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
CHUTE-SIDE DISCHAR
PartSelect #: PS19269737
Manufacturer #: 731-07131
The Side Discharge Chute is a manufacturer certified black plastic part used to direct glass clippings out from unde the deck of the mower, which is rated as "Easy" to install. If broken or damaged, i...
$24.77
Special Order
Lawn Mower Trail Shield
PartSelect #: PS9103444
Manufacturer #: 731-07203
This trail shield, also referred to as a rear skirt, is designed for use with various makes and models of lawn mowers and is a genuine OEM part. This trail shield is sold as an individual part without...
$16.86
In Stock
Side Chute
PartSelect #: PS16415773
Manufacturer #: 731-07486
This genuine manufacturer-sourced part is specially designed for use with Craftsman lawn mowers. It is mounted to the side of the mower to direct grass clippings. The chute provides an identical repla...
$26.53
Special Order
Bell Blade Support
PartSelect #: PS17055954
Manufacturer #: 736-0524B-1
The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation ...
$6.40
In Stock
Screw
PartSelect #: PS12664831
Manufacturer #: 710-04995A
This replacement screw is a genuine item that is sourced from original equipment manufacturer. It is a high quality hardware that is commonly used with walk-behind lawn mowers. This screw has multiple...
$6.47
In Stock
Kit-service Replac
PartSelect #: PS10009638
Manufacturer #: 753-06304
This is a genuine OEM replacement kit. It includes the Blade Adapter,Bell Blade Support and the Hex Cap Screw that secures the blade to the Mower. When you use this kit, this is a good time to clean ...
$34.50
In Stock
Nut-flglk
PartSelect #: PS9299574
Manufacturer #: 712-04064
Also referred to as a Lock Nut or Flange Lock, this nut is designed for use with various lawn and garden equipment. The purpose of this part is to hold parts in place while resisting loosening when pr...
$6.40
In Stock
Control Cable - B&s
PartSelect #: PS16463795
Manufacturer #: 946-0957
This is an authentic replacement part sourced directly from the manufacturer. The mower cable is commonly found in Craftsman lawn mowers. This is a metal cable with a flexible plastic casing, and it...
$25.04
Special Order
Screw, 3/8-24 x 1.50 (w/25mm Blade Adapter)
PartSelect #: PS9088496
Manufacturer #: 710-1044
The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of meta...
$6.40
In Stock
Deck-21 3 In 1
PartSelect #: PS10012870
Manufacturer #: 787-01869B-0638
This 21-inch deck provides the structural base for cutting components while supporting mulching, bagging, and discharge functions. Built for durability, it supports stable operation and reliable cutting performance.
$166.03
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
I replaced the deck on my Craftsman Lawn Mower, and needed a new water nozzle and some screws to hold the front wheel assembly on.
I removed the rear wheels, then I removed the blade, then the motor, then the front wheel assembly. The bolts holding the front wheel assembly were rusted and rounded trying to remove them, so I cut them out with a grinder. Afterwards I removed the remainder of the screw with a pair of pliers. I also removed the Water jet cleanout nozz
... Read more
le, found it was cracked, ordered the part from PartSelect, along with the screws needed to attach the front wheel assembly. I cleaned the remaining parts and re installed them onto the new deck. First, I installed the front wheel assembly, then the motor, then sat the mower upright, installed the blade, then took the rear wheel assembly and aligned it and fastened it to the deck. Last piece was the water nozzle. I placed it in the recess for it, and fastened it with the bolt. Then I tested the mower, and it worked without issue. Afterwards I used the new clean out port to rinse the underside of the deck, and it worked well.
Read less
Parts Used:
-
Dan from LAKEWOOD, OH
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Motor built by Honda ran perfectly...deck was totally rusted and rotten
Removed front wheel assembly (5 screws) Removed rear wheel/handle assembly (3 screws and disconnect control cable with pliers), removed blade (1 bolt)...transferred all to new deck with new screws and washers (deck screws are easy to remove and replace as they screw into plastic)...Before installing blade I sprayed under deck with truck u
... Read more
ndercoating spray to help prevent rust)....entire process took about an hour and now I have a like-new mower. Note that Honda stopped making this motor this year, so it's very much worth saving.
Read less
Parts Used:
-
Mike from NORFOLK, VA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front axle cover broke
-
David from ARLINGTON, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
2 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!