11A-A2BF758 (2020) Murray Lawn Mower - Overview
Sections of the 11A-A2BF758
[Viewing 13 of 13]
Keep searches simple, eg. "belt" or "pump".
Mulching Blade
PartSelect #: PS9169783
Manufacturer #: 942-0741A
This authentic replacement blade is manufactured for use with Craftsman walk-behind lawnmowers and is designed to deliver clean, efficient cuts. Measuring 21 inches in length, the blade features an an...
$34.74
In Stock
Grass Catcher Frame Assembly
PartSelect #: PS9988561
Manufacturer #: 647-04271-0637
Are you tired of a disorganized freezer? We've got the perfect solution for you - a genuine LG Tray Assembly, Drawer. Crafted with impeccable precision, this tray assembly helps breathe new life into ...
$58.89
In Stock
Black Grass Bag
PartSelect #: PS17016671
Manufacturer #: 764-04077D
This genuine OEM grass bag is designed for use with walk-behind lawn mowers. It attaches to the rear of the mower deck to collect grass clippings during operation, helping keep your lawn clean and tid...
$63.43
In Stock
Lawn Mower Trail Shield
PartSelect #: PS9103444
Manufacturer #: 731-07203
This trail shield, also referred to as a rear skirt, is designed for use with various makes and models of lawn mowers and is a genuine OEM part. This trail shield is sold as an individual part without...
$16.86
In Stock
Bell Blade Support
PartSelect #: PS17055954
Manufacturer #: 736-0524B-1
The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation ...
$6.40
In Stock
Screw
PartSelect #: PS12664831
Manufacturer #: 710-04995A
This replacement screw is a genuine item that is sourced from original equipment manufacturer. It is a high quality hardware that is commonly used with walk-behind lawn mowers. This screw has multiple...
$6.47
In Stock
Nut-flglk
PartSelect #: PS9299574
Manufacturer #: 712-04064
Also referred to as a Lock Nut or Flange Lock, this nut is designed for use with various lawn and garden equipment. The purpose of this part is to hold parts in place while resisting loosening when pr...
$6.40
In Stock
Screw, 3/8-24 x 1.50 (w/25mm Blade Adapter)
PartSelect #: PS9088496
Manufacturer #: 710-1044
The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of meta...
$6.40
In Stock
Deck-21 3 In 1
PartSelect #: PS10012870
Manufacturer #: 787-01869B-0638
This 21-inch deck provides the structural base for cutting components while supporting mulching, bagging, and discharge functions. Built for durability, it supports stable operation and reliable cutting performance.
$166.03
In Stock
Knob-wing 5/16-18
PartSelect #: PS9096073
Manufacturer #: 720-04124
This is a genuine OEM sourced replacement part designed for use with lawn mowers. This wing knob helps to secure upper and lower handles on a mower. It is made out of red plastic and it is sold indivi...
$7.84
In Stock
Control Cable
PartSelect #: PS16463553
Manufacturer #: 946-04661A
This genuine OEM replacement part is used on walk behind/push mowers. This cable consists of a metal wire cable with z-type bent ends and rubberized cover/body. The control cable stops the blade when ...
$21.29
In Stock
Common Symptoms of the 11A-A2BF758
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bag will not stay in placed when mower is running.
Repair was not effective. I used once and the bag keep getting off or blown out of the mower.
Parts Used:
-
Peter from San Diego, CA
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced existing grass bag
The bag was slightly larger than the original. So the clips along all sides needed to be trimmed slightly to fit the existing frame. 15 minute fix and it works perfect.
Parts Used:
-
Mark from PHOENIX, AZ
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
3 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Motor built by Honda ran perfectly...deck was totally rusted and rotten
Removed front wheel assembly (5 screws) Removed rear wheel/handle assembly (3 screws and disconnect control cable with pliers), removed blade (1 bolt)...transferred all to new deck with new screws and washers (deck screws are easy to remove and replace as they screw into plastic)...Before installing blade I sprayed under deck with truck u
... Read more
ndercoating spray to help prevent rust)....entire process took about an hour and now I have a like-new mower. Note that Honda stopped making this motor this year, so it's very much worth saving.
Read less
Parts Used:
-
Mike from NORFOLK, VA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!