Models
>
11A-A26M011
11A-A26M011 Troy-Bilt Lawn Mower - Overview
Models starting with 11A-A26M011
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Grass Bag
PartSelect #: PS10036233
Manufacturer #: 964-04117B
This grass bag comes in black fabric, and is manufacturer-certified and individually sold. It's used to collect grass clippings. If there are any holes in our bag, you'll need to replace it. The bag a...
No Longer Available
Mulching Blade
PartSelect #: PS9169783
Manufacturer #: 942-0741A
This is an authentic replacement part manufactured for use with Craftsman walk-behind lawnmowers. The blade is angled to allow the clippings to rotate through the cutting deck to produce fine clipping...
$32.37
In Stock
Discharge Chute
PartSelect #: PS9454662
Manufacturer #: 731-07131
The Side Discharge Chute is a manufacturer certified black plastic part used to direct glass clippings out from unde the deck of the mower, which is rated as "Easy" to install. If broken or damaged, i...
No Longer Available
Hinged Mulch Plug Assembly
PartSelect #: PS10037714
Manufacturer #: 987-02516A
This OEM Hinged Mulch Plug Assembly includes both the plug and the spring. It is a black, plastic assembly which is rated as "Easy" to install, requiring a screwdriver, and socket set. This part seals...
No Longer Available
Trail shield
PartSelect #: PS9103444
Manufacturer #: 731-07203
This trail shield, also referred to as a rear skirt, is designed for use with various makes and models of lawn mowers and is a genuine OEM part. This trail shield is sold as an individual part without...
$10.29
In Stock
Control Cable, 37.58", 148Cc Engine
PartSelect #: PS10033966
Manufacturer #: 946-04661A
No Longer Available
Bell Blade Support
PartSelect #: PS17016260
Manufacturer #: 736-0524B-1
The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation ...
$5.84
In Stock
Common Symptoms of models starting with 11A-A26M011
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
rear axel assembly needed replacement due to broken wheel height lever
Removed rear wheels, cut the old axel of with a sawsall and pulled the assembly out as I didn't want chance breaking the plastic retaining tabs as they can become brittle from age. Break the tabs and you have nothing to hold the new axel assembly in place.
Snapped the new assembly in place and put the wheels back on.
Snapped the new assembly in place and put the wheels back on.
Parts Used:
-
glenn from LA CRESCENT, MN
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Socket set
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Motor built by Honda ran perfectly...deck was totally rusted and rotten
Removed front wheel assembly (5 screws) Removed rear wheel/handle assembly (3 screws and disconnect control cable with pliers), removed blade (1 bolt)...transferred all to new deck with new screws and washers (deck screws are easy to remove and replace as they screw into plastic)...Before installing blade I sprayed under deck with truck u
... Read more
ndercoating spray to help prevent rust)....entire process took about an hour and now I have a like-new mower. Note that Honda stopped making this motor this year, so it's very much worth saving.
Read less
Parts Used:
-
Mike from NORFOLK, VA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!