1106118800 Kenmore Dryer Parts & Repair Help | PartSelect
Models > 1106118800

1106118800 Kenmore Dryer - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(58)
PartSelect #:PS884734
Manufacturer #:8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...
$7.32
In Stock
(2)
PartSelect #:PS11740482
Manufacturer #:WP233520
This genuine OEM washer has a 3/4 inch outside diameter. This thrust washer can be used on most makes and models of dryers. A complete list of compatible dryers is available below....
$7.09
In Stock
(2)
PartSelect #:PS11746840
Manufacturer #:WP90767
This screw is sold individually.
$7.76
In Stock
(7)
PartSelect #:PS11743793
Manufacturer #:WP694674
Cycling themostats continually cycle the heating element off and on to maintain a constant inner temperature within the dryer. This particular cycling thermostat can be adjusted be...
$46.47
In Stock
(6)
PartSelect #:PS11740194
Manufacturer #:WP230131
This dryer door cable is intended for use with spring part number PS343422. This cable is compatible with many of Whirlpool/Kenmore's brands of gas and electric clothes dryers.
$11.62
In Stock
(2)
PartSelect #:PS11731288
Manufacturer #:W10854425
This part is the replacement single front panel clip for your dryer. It is made of metal and is approximately 2 inches long and ¾ inch wide. The front panel retainer clip is what h...
$16.15
In Stock
PartSelect #:PS11738705
Manufacturer #:WP18776
This part is used to secure the top panel to the cabinet. Sold individually.
$11.62
In Stock
PartSelect #:PS11741307
Manufacturer #:WP337186
***The manufacturer suggests to replace both springs at the same time.***
$7.09
In Stock
(1)
PartSelect #:PS11743744
Manufacturer #:WP681414
This screw is sold individually.
$6.93
In Stock
(2)
PartSelect #:PS11747542
Manufacturer #:WP98165
This screw is a little under an inch long and is made of metal. It is used with a refrigerator's ice maker assembly. Sold individually.
$7.03
In Stock
Questions and Answers for 1106118800
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dryer door cable broken

Door Cable – Part Number: 230131
  • Customer: George from Rochester Hills, MI
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 37 of 46 people found this instruction helpful
1. Remove the lint filter. Then remove 2 screws at the lint filter housing.

2. At the back of the dryer, remove 2 screws that restrain the hinges for the dryer top. Do NOT remove the hinges.

3. Remove the front lower access panel. It snaps at the top and hinges at the bottom. It can be slipped off the hinges.

4. Remove 2 ... read more

Drum was binding because of worn bearing supporting front of dryer drum

Bearing and Seal Kit – Part Number: 279264
  • Customer: Leslie from Townsend, GA
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 22 of 33 people found this instruction helpful
First I unplugged the dryer for safety, then I removed the top of the dryer, then removed the 2 hex head screws holding the font door panel onto the dryer. Then I disconnected the door safety switch. the rest was cake. I removed the old bearing and cut the new bearing and seal to the exact size of the old one. I used contact cement to glue the new bearing a... read more

Temperature setting not working

  • Customer: Robert from Buffalo, NY
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 17 of 20 people found this instruction helpful
Took off back cover, thermostat was easily identified because of photos I've seen on website. Took 2 connectors off, removed 2 screws and removed old thermostat. That was pretty much it!

NOTE: Replacement thermostat 694674 has an adjustable temperature range setting that MUST be manually set prior to installing! You need to use the enclosed chart ... read more