1106007950 Kenmore Dryer Parts & Repair Help | PartSelect
Models > 1106007950

1106007950 Kenmore Dryer - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(58)
PartSelect #:PS884734
Manufacturer #:8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...
$7.32
In Stock
(2)
PartSelect #:PS11740482
Manufacturer #:WP233520
This genuine OEM washer has a 3/4 inch outside diameter. This thrust washer can be used on most makes and models of dryers. A complete list of compatible dryers is available below....
$7.09
In Stock
(23)
PartSelect #:PS395284
Manufacturer #:833697
This condenser fan motor kit is designed for use with refrigerators. This fan draws air through the condenser coils and over the compressor. It does this with the goal of cooling t...
$46.23
In Stock
(2)
PartSelect #:PS11746840
Manufacturer #:WP90767
This screw is sold individually.
$7.76
In Stock
PartSelect #:PS11740701
Manufacturer #:WP308685
Sold individually.
$7.09
In Stock
(6)
PartSelect #:PS11740194
Manufacturer #:WP230131
This dryer door cable is intended for use with spring part number PS343422. This cable is compatible with many of Whirlpool/Kenmore's brands of gas and electric clothes dryers.
$11.62
In Stock
PartSelect #:PS11738705
Manufacturer #:WP18776
This part is used to secure the top panel to the cabinet. Sold individually.
$11.62
In Stock
PartSelect #:PS11741307
Manufacturer #:WP337186
***The manufacturer suggests to replace both springs at the same time.***
$7.09
In Stock
(2)
PartSelect #:PS11742711
Manufacturer #:WP488130
This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, ref...
$6.89
In Stock
(1)
PartSelect #:PS11743744
Manufacturer #:WP681414
This screw is sold individually.
$6.93
In Stock
Questions and Answers for 1106007950
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Sometimes the condenser fan would start causing the refrigerator to overheat.

  • Customer: Tom from Franklin, WI
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 159 of 172 people found this instruction helpful
Unplug the appliance.
Removed the screws holding the back panel.
Removed the fan blade.
removed 3 screws holding the condenser fan.
Remove the 3 metal brackets attached to the fan.
(First note which studs the brackets are attached to. Attach the 3 metal brackets to the new fan. (New screws were supplied)
Cut and strip the wire a... read more

Dryer door cable broken

Door Cable – Part Number: 230131
  • Customer: George from Rochester Hills, MI
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 37 of 46 people found this instruction helpful
1. Remove the lint filter. Then remove 2 screws at the lint filter housing.

2. At the back of the dryer, remove 2 screws that restrain the hinges for the dryer top. Do NOT remove the hinges.

3. Remove the front lower access panel. It snaps at the top and hinges at the bottom. It can be slipped off the hinges.

4. Remove 2 ... read more

noisy fan motor

  • Customer: robert from nashotah, WI
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Socket set
  • 31 of 38 people found this instruction helpful
rmv panel (5min) rmv fan/motor 3 screws (10 m) cut wire 2in from motor, re route remainder of wire to front so can strip for wire nuts. ( 10m) attach old fan to new motor, place in old opening ,3 screws, a little fussy to align, ( 15m ) route and strip wire from new motor , zip ties work well, wire nuts , plug in fridge vola, no noise, close up, reverse pan... read more