Models > 110412-0133-E1

110412-0133-E1 Briggs and Stratton Engine - Overview

Sections of the 110412-0133-E1

[Viewing 9 of 9]
Keep searches simple, eg. "belt" or "pump".
Filter- A/C Cartridge – Part Number: 491588S
Filter- A/C Cartridge
★★★★★
★★★★★
(4)
PartSelect #: PS8987387
Manufacturer #: 491588S
This is a replacement air filter/AC cartridge for your small engine. The air filter prevents dirt and debris from entering the engine. Over time, the air filter can become clogged or damaged, and this...
$7.06
  In Stock
Starter Pawl-Ratchet – Part Number: 281505S
Starter Pawl-Ratchet
PartSelect #: PS8942598
Manufacturer #: 281505S
The manufacturer-approved Ratchet Pawl (Starter Pawl) comes in a set of two (2). This part attaches inside the recoil assembly, and is used to engage the flywheel. if broken due to wear/damage it will...
$3.99
  In Stock
Kit-Needle/Seat – Part Number: 398188
Kit-Needle/Seat
★★★★★
★★★★★
(1)
PartSelect #: PS8963322
Manufacturer #: 398188
This needle and seat kit, also known as a float valve, is found in many types of liquid-fueled lawn equipment, such as carburetors. The valve regulates the flow of fuel into the float bowl. The needle...
$6.91
  In Stock
Pulley/Spring Assembly – Part Number: 498144
Pulley/Spring Assembly
★★★★★
★★★★★
(2)
PartSelect #: PS8988822
Manufacturer #: 498144
$20.78
  In Stock
Connector-Hose – Part Number: 692317
Connector-Hose
★★★★★
★★★★★
(1)
PartSelect #: PS9074730
Manufacturer #: 692317
$7.06
  In Stock
Plug-Spark – Part Number: 491055S
Plug-Spark
★★★★★
★★★★★
(2)
PartSelect #: PS9281094
Manufacturer #: 491055S
$4.99
  In Stock
Gasket-Float Bowl – Part Number: 693981
Gasket-Float Bowl
PartSelect #: PS9064482
Manufacturer #: 693981
$4.99
  In Stock
Filter-A/C Foam – Part Number: 493537S
Filter-A/C Foam
PartSelect #: PS8983404
Manufacturer #: 493537S
$7.06
  In Stock
Bowl-Float – Part Number: 796611
Bowl-Float
★★★★★
★★★★★
(1)
PartSelect #: PS9306908
Manufacturer #: 796611
$7.06
  In Stock
Key-Flywheel – Part Number: 222698S
Key-Flywheel
★★★★★
★★★★★
(1)
PartSelect #: PS8925657
Manufacturer #: 222698S
$4.99
  In Stock
Fuel Tank – Part Number: 799863
Fuel Tank
★★★★★
★★★★★
(1)
PartSelect #: PS9141053
Manufacturer #: 799863
This is a replacement fuel tank for your outdoor power equipment. It is made of black plastic and comes with the tank itself, as well as the fuel cap. The fuel tank stores fuel before it is transporte...
$98.07
  In Stock
Deflector-Muffler – Part Number: 796956
Deflector-Muffler
PartSelect #: PS9138598
Manufacturer #: 796956
$10.38
  In Stock

Questions And Answers for 110412-0133-E1

Be the first to ask our experts a question about this model!

Common Symptoms of the 110412-0133-E1

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Parts fit like a glove
Removed pull start assembly down to the crank. Installed motor housing, motor fan & rewind assembly. All went real good.
Parts Used:
Fan-Flywheel Starter-Rewind Housing-Blower
  • Wayne from OOLTEWAH, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Socket set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Starter Rewind broke internally-rope did not work
Removed old broken rewind starter (4 bolts); found the Model and Serial numbers; found Parts Direct and ordered new assembly; upon delivery, reinstalled with new Starter and hardware.
Parts Used:
Starter-Rewind
  • Mark from N FRANKLIN, CT
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Generator would not start, Birggs & Stratton recommended to replase Gasket Exhaust.
Remove the spark suppresser, 4 face screws, 2 bottom screws and the two screws the hold the gasket. I also had to back out the top screw of the cover it blocked and prevented the removal of the gasket.
Parts Used:
Gasket- Exhaust
  • Alberto from PALMETTO BAY, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
7 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!