Models > 10650022211

10650022211 Kenmore Refrigerator - Overview

Sections of the 10650022211

[Viewing 14 of 14]
Keep searches simple, eg. "belt" or "pump".
Light Bulb - 40W – Part Number: 8009
Light Bulb - 40W
★★★★★
★★★★★
(63)
PartSelect #: PS884734
Manufacturer #: 8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
$7.32
  In Stock
Lower Door Closing Cam – Part Number: WP2182179
Lower Door Closing Cam
★★★★★
★★★★★
(84)
PartSelect #: PS11739042
Manufacturer #: WP2182179
The lower door closing cam is used in refrigerator doors, it can be located on the fresh food side or the freezer side. It helps hold the door open. This cam is made out of plastic, so it might crack ...
$8.53
  In Stock
Refrigerator Crisper Drawer With Handle – Part Number: WP2188664
Refrigerator Crisper Drawer With Handle
★★★★★
★★★★★
(106)
PartSelect #: PS11739122
Manufacturer #: WP2188664
This OEM, clear convertible meat drawer can be used to store meats or vegetables and is designed for the lower portion of your refrigerator, generally. It has its own cold air duct to allow cold air f...
$123.40
  In Stock
Refrigerator Ice and Water Filter – Part Number: EDR1RXD1
Refrigerator Ice and Water Filter
★★★★★
★★★★★
(89)
PartSelect #: PS11701542
Manufacturer #: EDR1RXD1
This is an OEM replacement ice and water filter for your refrigerator. In side-by-side refrigerators, it is found in the top right corner or the bottom left grille. In bottom-freezer refrigerators, th...
$81.43
  In Stock
Ice Bin Auger Drum – Part Number: 4388736
Ice Bin Auger Drum
★★★★★
★★★★★
(23)
PartSelect #: PS372186
Manufacturer #: 4388736
This white ice bin auger drum comes with a washer.
$61.38
  In Stock
Refrigerator Slide-Out Shelf with Glass – Part Number: WPW10276348
Refrigerator Slide-Out Shelf with Glass
★★★★★
★★★★★
(49)
PartSelect #: PS11751713
Manufacturer #: WPW10276348
$156.14
  In Stock
Bi-Metal Defrost Thermostat – Part Number: WPW10225581
Bi-Metal Defrost Thermostat
★★★★★
★★★★★
(25)
PartSelect #: PS11750673
Manufacturer #: WPW10225581
If you have ice building up in your freezer, or if your freezer is getting too warm during the defrost cycle you may need to replace the bi-metal defrost thermostat. The function of the defrost bi-met...
$43.36
  In Stock
Gallon Door Bin - Clear – Part Number: WPW10710203
Gallon Door Bin - Clear
★★★★★
★★★★★
(60)
PartSelect #: PS11757236
Manufacturer #: WPW10710203
Sold individually. This door bin is for refrigerators. The door bin attaches to the inside of the refrigerator door and typically holds jars and bottles.
$37.94
  In Stock
Ice Bucket – Part Number: WPW10670845
Ice Bucket
★★★★★
★★★★★
(51)
PartSelect #: PS11757044
Manufacturer #: WPW10670845
Bucket only. All other parts sold separately. This part holds the ice once it's released from the icemaker.
$97.56
  In Stock
Crisper Cover with Glass – Part Number: W10508993
Crisper Cover with Glass
★★★★★
★★★★★
(19)
PartSelect #: PS4082908
Manufacturer #: W10508993
This part is also known as a shelf frame. This drawer cover is for refrigerators. Drawer cover has rail brackets under the cover that hold the drawer and allow the drawer to slide in and out on th...
$130.24
  In Stock
Refrigerator Shelf Glass – Part Number: W10864399
Refrigerator Shelf Glass
★★★★★
★★★★★
(20)
PartSelect #: PS11731733
Manufacturer #: W10864399
This is the glass panel only. The frame is sold separately.
$109.67
  In Stock
Crisper Pan - Clear – Part Number: WPW10178772
Crisper Pan - Clear
★★★★★
★★★★★
(22)
PartSelect #: PS11749661
Manufacturer #: WPW10178772
Sold individually. This crisper drawer is clear in colour. The crisper drawer stores fruits and vegetables at a humidity level that helps keep them fresh longer.
$87.59
  In Stock

Questions And Answers for 10650022211

Ask our experts a question about this model and we'll get back to you as soon as possible!

2 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Brian
    February 4, 2020
    Recently replaced hose connecting water valve to ice maker because the bottom plastic fitting was cracked. Now water is spraying out where hose connects to back of fridge. The water is obviously being dead headed. Its not leaking but being force out with pressure probably what cause fitting to crack. What would cause this? Is there a valve which opens to allow water to enter or is it frozen shut? Tried pushing a thin wire through without any success
    For model number 10650022211
    Hello and thank you for writing. It certainly sounds like it could be a faulty water inlet valve PS11749668 or a possible blockage in the water valve tubing PS11757031 o connectors PS11740187 you should check the part(s) for signs of damage or being clogged up, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Teresa
    February 16, 2020
    I need a filter
    For model number 10650022211
    Hello Teresa, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS11701542. We hope this helps.

    Was this helpful?
    Thank you for voting!
    Related Parts:

      Common Symptoms of the 10650022211

      [Viewing 21 of 21]
      Door won’t open or close
      Fixed by
      these parts
      Show All
      Fridge too warm
      Fixed by
      these parts
      Show All
      Noisy
      Fixed by
      these parts
      Show All
      Ice maker won’t dispense ice
      Fixed by
      these parts
      Show All
      Light not working
      Fixed by
      these parts
      Show All
      Ice maker not making ice
      Fixed by
      these parts
      Show All
      Clicking sound
      Fixed by
      these parts
      Show All
      Freezer not defrosting
      Fixed by
      these parts
      Show All
      Leaking
      Fixed by
      these parts
      Show All
      Freezer section too warm
      Fixed by
      these parts
      Show All
      Fridge and Freezer are too warm
      Fixed by
      these parts
      Show All
      Will Not Start
      Fixed by
      these parts
      Show All
      Frost buildup
      Fixed by
      these parts
      Show All
      Not dispensing water
      Fixed by
      these parts
      Show All
      Fridge too cold
      Fixed by
      these parts
      Show All
      Door Sweating
      Fixed by
      these parts
      Show All
      Freezer too cold
      Fixed by
      these parts
      Show All
      Too warm
      Fixed by
      these parts
      Show All
      Ice maker dispenses too much ice
      Fixed by
      these parts
      Show All
      Ice maker dispenses too little ice
      Fixed by
      these parts
      Show All
      Fridge runs too long
      Fixed by
      these parts
      Show All
      Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
      Plastic bits dispensed from Ice Dispenser in Door
      Removed Ice bin from Fridge

      Removed all bolts on bin with nut driver...about six

      Removed housing...be careful with spring on crusher/cube control rod

      Removed C clamp on end of auger with small slotted screw driver and needle nose pliers.

      Removed plastic nut on end of auger shaft

      Removed Ice crusher jaws and laid them out in the correct order

      Removed Ice propeller and installed new part

      Put back together in opposite order

      Easy
      Parts Used:
      Ice Bin Auger Drum
      • john from seaford, VA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Pliers, Screw drivers, Socket set
      201 of 222 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Fridge was getting too warm, ice buildup on coils.
      WARNING: REPLACING THIS PART REQUIRES CUTTING AND SPLICING ELECTRICAL WIRES. RISK OF ELECTRICAL SHOCK OR FIRE. DO NOT ATTEMPT THIS REPAIR IF YOU ARE NOT EXPERIENCED WITH ELECTRICAL WIRING.

      Part Info:
      The bi-metal strip is clipped onto the evaporator coils and is designed to regulate the defrost coil temperature. If it is not functioning properly you may notice ice buildup preventing air flow (and preventing proper refrigeration), or more rarely the freezer side may get too warm during the defrost cycle.

      Materials:
      * Replacement bi-metal strip
      * Wire cutters
      * Wire strippers
      * Wire nuts
      * Electrical tape
      * 10MM socket

      Steps:

      1: UNPLUG THE FRIDGE! If there is ice buildup, wait until the ice has melted. A box fan blowing at the ice will help melt it more quickly.

      2: Remove the panel covering the evaporator coils. It's located inside the fridge, on the freezer side.

      3: Un-clip the bi-metal strip from the evaporator coils.

      4: Unplug the wires from the evaporator fan, defrost coil and bi-metal strip, then disconnect the main connector that is plugged into the rear wall.

      5: Clip both wires to the old ( bad ) bi-metal strip. Cut close to the casing of the bi-metal strip so there are long wires to splice onto.

      6: Strip 1/4 to 1/2 inches of insulation off of the ends of the wires ( depending on the size of the wire-nuts you use). Twist the bare wires slightly to prevent fraying.

      7: Do the same for the ends of the wires on the (new) bi-metal strip.

      8: Take the ends of the wires belonging to the (new) bi-metal strip and the wires coming from the main plug. Take the like-colored wires, and twist the bare metal ends together.

      9: Twist on wire nuts, for both sets of wires. Make sure they are snug, with no bare wire showing.

      10: Tape over the wire nuts with electrical tape. Tape over the wires nuts in a spiral fashion, completely covering the nut and both wires that are now spliced together. This will prevent accidental shorting.

      11: Plug the main plug back into the rear wall of the fridge. Also re-connect the connectors to the evaporator fan and defrost coil. Make sure the clips on the connectors are snug to ensure a good connection.

      12: Clip the new bi-metal strip onto the coils, in the same spot as before. ( Usually just after the small incoming copper tubing that connects to the coils, known as the expansion valve. That is usually the coldest spot on the coils during operation).

      13: Replace the panel that covers the coils.

      14: Plug the fridge back in... Now you fridge should defrost correctly. If it does not, your defrost coil could be burned out, or the control board could be faulty.
      Parts Used:
      Bi-Metal Defrost Thermostat
      • Cathy from Winter Park, FL
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver
      150 of 168 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      evaporator fan stopped working
      1) removed the face plate that runs 3/4 way up the back of the freezer side. a total of 8 screws. (6")
      2) disconnected the three electrical connections.(30sec)
      3) removed the fan of the the old evaporator fan motor (5sec)
      3) removed the fan motor (1")
      4) put in the new fan motor (1")
      5) put on the old fan on the new fan motor(5sec)
      6) reconnected the three electrical connections (30sec)
      7) replaced the face plate on the back of the freezer (6")
      Had re-frozen meat within 1 hour.
      Parts Used:
      Evaporator Fan Motor - 120V 60Hz
      • Antoni from vail, AZ
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers, Screw drivers
      92 of 99 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!