106154370 Craftsman Paint Sprayer - Overview
Sections of the 106154370
[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Flapper Valv
PartSelect #: PS10053848
Manufacturer #: VS001800AV
This is an authentic part that is supplied directly from the original equipment manufacturer for use with Craftsman Air Compressors. The exhaust flapper valve attaches on the valve plate under the cyl...
$20.28
In Stock
Cylinder Gasket
PartSelect #: PS10054429
Manufacturer #: XA003300AV
This is the genuine OEM supplied replacement part that is used on Campbell Hausfeld air compressors. A gasket is a mechanical seal which fills the space between the cylinder and the cylinder head. It ...
$12.90
In Stock
Self Tap Scr 5-40x1/4
PartSelect #: PS10051084
Manufacturer #: ST073231AV
This is an OEM part sourced directly from the manufacturer. The screw is commonly found in Craftsman compressors and paint sprayers. This part is made of metal, and is generally used to secure the f...
$6.25
In Stock
Oil Seal
PartSelect #: PS10050910
Manufacturer #: ST021600AV
This is an authentic manufacturer sourced replacement part which is specially designed for use with Campbell Hausfeld Air Compressors. The purpose of the oil seal is to prevent oil from leaking betwee...
$15.28
In Stock
Compression Connector Assembly
PartSelect #: PS10050905
Manufacturer #: ST018300AV
This is a genuine OEM part. The compression connector assembly is made by Campbell Hausfeld, and is compatible with many air compressor devices. The metal component secures the manifold to the compres...
$39.39
In Stock
Head Gasket
PartSelect #: PS17871363
Manufacturer #: XA003500AV
This is a genuine replacement part sourced directly from the manufacturer. The gasket is commonly found in Craftsman air compressors and paint sprayers. This part is made of flexible plastic, and is...
$20.78
In Stock
Bearing Cap Gasket
PartSelect #: PS10054427
Manufacturer #: XA003200AV
This is an authentic part is sourced directly from the original equipment manufacturer. The bearing cap gasket is commonly found in Craftsman air compressors. The purpose of this component is to provi...
$10.90
In Stock
Flat Washer, 8Pk
PartSelect #: PS10051549
Manufacturer #: STD551031
This is sold as a set that contains eight washers. These parts attach to the tank and are made out of metal. They are genuine items that are supplied by the original equipment manufacturer for use wit...
No Longer Available
Screw 5pk
PartSelect #: PS10051391
Manufacturer #: STD502502
This is an authentic manufacturer-supplied component which is designed for Craftsman equipment. It is a standard hardware which may have multiple applications. This is an identical replacement for a m...
No Longer Available
Questions And Answers for 106154370
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
seal on the crankshaft was leaking oil
Removed the guard and belt. Heated the flywheel with a propane torch. Careful not to over heat it. Flywheel came off easily with a 3 point puller. Removed the cap and pulled the old seal out. Cleaned the bore in the cap to get all the oil out and dried it. Started the seal into the cap with the letters out. Carefully pushed the seal down
... Read more
into the bottom of the cap with a long socket slightly smaller than the bore. Put a little oil on the inside of the seal and put the cap back on. Reheated the flywheel somewhat again and tapped it back on the shaft with a brass drift. Put the belt and guard back on. Started the compressor. No more oil leaking around the shaft.
Read less
Parts Used:
-
Francis from CROWN POINT, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set, Wrench (Adjustable), Wrench set
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
KNOCKING SOUND AND LOCK UP
TURN OFF POWER TO UNIT
REMOVE BOLTS ON TOP SIDE OF COMPRESSOR PUMP TO REMOVE PLATE. THERE ARE 2 SMALLER PLATES THAT COVER FLAPPER W/ 2 SMALL SCREWS ON EACH (MAKE NOTE OF SMALL TOP PLATE POSITION) REPLACE FLAPPER AND REASSEMBLE. THERE IS A GASKET ON LARGER PLATE THAT MAY NEED TO BE REPLACED.
REMOVE BOLTS ON TOP SIDE OF COMPRESSOR PUMP TO REMOVE PLATE. THERE ARE 2 SMALLER PLATES THAT COVER FLAPPER W/ 2 SMALL SCREWS ON EACH (MAKE NOTE OF SMALL TOP PLATE POSITION) REPLACE FLAPPER AND REASSEMBLE. THERE IS A GASKET ON LARGER PLATE THAT MAY NEED TO BE REPLACED.
Parts Used:
-
EDWARD from PHILADELPHIA, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!