1017 - Overview
Models starting with 1017
Click on the best match to narrow your results.
- 1017 Ridgid Wrench (Basin Wrench)
- 1017 Jenn-Air Range (Jenn Air Range/Stove/Oven 1017)
- 1017-0 Briggs and Stratton Generator (MC7500 Portable Generator)
- 1017-0-MC7500 Briggs and Stratton Generator (1017-0 - Mc7500)
- 10170 Dynabrade Sander Polisher (Orbital Sander)
- 101700 Jet Hoist & Winch (1/2 Ton 10 Foot Lift)
- 101701 Jet Hoist & Winch (1/2 Ton 15 Foot Lift)
- 101702 Jet Hoist & Winch (1/2 Ton 20 Foot Lift)
- 101703 Jet Hoist & Winch (1/2 Ton 30 Foot Lift)
- 101704 Jet Hoist & Winch (1 Ton 10 Foot Lift)
- 101706 Jet Hoist & Winch (1 Ton 20 Foot Lift)
- 101707 Jet Hoist & Winch (1 Ton 30 Foot Lift)
- 101708 Jet Hoist & Winch (1-1/2 Ton 10 Foot Lift)
- 101709 Jet Hoist & Winch (1-1/2 Ton 15 Foot Lift)
- 10171 Dynabrade Sander Polisher (Orbital Sander)
- 101710 Jet Hoist & Winch (1-1/2 Ton 20 Foot Lift)
- 101711 Jet Hoist & Winch (1-1/2 Ton 30 Food Lift)
- 101712 Jet Hoist & Winch (2 Ton 10 Foot Lift)
- 101713 Jet Hoist & Winch (2 Ton 15 Foot Lift)
- 101714 Jet Hoist & Winch (2 Ton 20 Foot Lift)
- 101715 Jet Hoist & Winch (2 Ton 30 Foot Lift)
- 101716 Jet Hoist & Winch (3 Ton 10 Foot Lift)
- 101717 Jet Hoist & Winch (3 Ton 15 Foot Lift)
- 101718 Jet Hoist & Winch (3 Ton 20 Foot Lift)
- 101719 Jet Hoist & Winch (3 Ton 30 Foot Lift)
- 10172 Dynabrade Sander Polisher (Orbital Sander)
- 101720 Jet Hoist & Winch (5 Ton 10 Foot Lift)
- 101721 Jet Hoist & Winch (5 Ton 15 Foot Lift)
- 101722 Jet Hoist & Winch (5 Ton 20 Foot Lift)
- 101723 Jet Hoist & Winch (5 Ton 30 Foot Lift)
- 101724 Jet Hoist & Winch (10 Ton 10 Foot Lift)
- 101725 Jet Hoist & Winch (10 Ton 15 Foot Lift)
- 101726 Jet Hoist & Winch (10 Ton 20 Foot Lift)
- 101727 Jet Hoist & Winch (10 Ton 30 Foot Lift)
- 10173 Dynabrade Sander Polisher (Orbital Sander)
- 10174 Dynabrade Sander Polisher (Orbital Sander)
Keep searches simple, eg. "belt" or "pump".
Wall Vent Cap Kit - 6 Inch duct
PartSelect #: PS2105233
Manufacturer #: A406
This wall vent cap kit comes with a spring loaded damper and instructions. It is designed for a 6" diameter outside vent.
No Longer Available
Wall Vent Cap Kit - 5 Inch duct - with Gray Cover
PartSelect #: PS2105196
Manufacturer #: A405
This wall vent cap kit comes with a spring loaded damper. This part can be painted.
No Longer Available
Fuel Valve With Bushing
PartSelect #: PS8911051
Manufacturer #: 192980GS
Made of durable rubber and plastic components, this Fuel Valve and Bushing are designed for use in over 150 models of generators and pressure washers. This item is sold as a kit, including the valve a...
$26.70
In Stock
Blower Motor
PartSelect #: PS2076843
Manufacturer #: 707704K
This is a blower motor for your range, but you may also know it as a blower fan motor or a downdraft vent fan motor. This part is used with down draft models. It helps draw the steam and odors through...
$235.90
In Stock
Range Exhaust Vent Blower Wheel
PartSelect #: PS11757592
Manufacturer #: WPY707985
This exhaust vent blower wheel is almost seven inches in diameter, and just under four inches deep. It is made entirely of metal and is used with a range's venting system.
$92.47
In Stock
Breaker, Circuit, 20a
PartSelect #: PS9919917
Manufacturer #: 209872GS
This circuit breaker is an important safety device found in the control box of your generator. It protects the electrical system from overloads and short circuits by automatically cutting off the elec...
$15.10
Special Order
Grommet,tank
PartSelect #: PS9307985
Manufacturer #: 83465GS
This is an authentic OEM part from Briggs and Stratton and Snapper for use with Generators. The fuel tank mounting grommet forms a cushion between the fuel tank and the fuel tank mounting bolts. The m...
$6.25
In Stock
Assembly, Holder, Brush
PartSelect #: PS9063496
Manufacturer #: 66386GS
The brush holder assembly in your generator keeps the brushes in place, allowing them to touch the rotor. It consists of a plastic brush holder and two carbon brushes with lead wires and attached spri...
$31.80
On Order
Screw, M5 - .8 X 10 Taptite
PartSelect #: PS9116859
Manufacturer #: 74908GS
This is an original Briggs & Stratton replacement part. The screw is designed by the manufacturer for use in generators. This part is made of metal, and is generally used in securing the bearing cov...
$6.25
In Stock
Power Regulator Assembly
PartSelect #: PS9148520
Manufacturer #: 84132GS
This is a genuine OEM supplied part that is specially designed for Briggs and Stratton portable generators. The item provides an identical replacement for a faulty or a missing power regulator assembl...
$52.05
Special Order
Rectifier, Battery Charge
PartSelect #: PS9054741
Manufacturer #: 65795GS
The battery charge rectifier goes inside the control box. It is an OEM from Briggs & Stratton for use in generators. This part is sold individually and is made of metal. A wrench and a screwdriver may...
No Longer Available
Outlet, 120/240V, 30A
PartSelect #: PS9359426
Manufacturer #: 204075GS
This is available as an individual replacement. The outlet is part of the control panel assembly. When replacing this item a wrench may be needed. It is made of metal and plastic and will need to be r...
$26.40
Special Order
Exact Part matches for your search term
[Viewing 9 of 9]
Washer, Flat, 1/2 SAE
This part number matches the current model number 1017
PartSelect #: PS8820377
Manufacturer #: 1017
No Longer Available
WHEEL RIM
This part number matches the current model number 1017
PartSelect #: PS9444400
Manufacturer #: 1017
No Longer Available
10" Rip Saw Blade
This part number matches the current model number 1017
PartSelect #: PS10315357
Manufacturer #: 1017
No Longer Available
Wire Insulation
This part number matches the current model number 1017
PartSelect #: PS10435462
Manufacturer #: 1017
$4.13
In Stock
Owner's manual
This part number matches the current model number 1017
PartSelect #: PS12273321
Manufacturer #: 1017
No Longer Available
Hopper assembly
This part number matches the current model number 1017
PartSelect #: PS12415980
Manufacturer #: 1017
No Longer Available
CABLE RETAINER
This part number matches the current model number 1017
PartSelect #: PS18999250
Manufacturer #: 1017
$6.25
Special Order
SPACER
This part number matches the current model number 1017
PartSelect #: PS19058574
Manufacturer #: 1017
$35.28
Special Order
Nut
This part number matches the current model number 1017
PartSelect #: PS19559299
Manufacturer #: 1017
No Longer Available
Common Symptoms of models starting with 1017
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
bad element control switch
1. Turn off power to range at circuit breaker
2. Remove grate
3 Remove control knobs
4, Remove two screws holding control panel
5. With wrench, remove locking nuts from control switches
6. Lift panel, exposing switches
7. With new switch in hand, unattach old switch one terminal at a time, attaching new swi ... Read more tch exactly as old switch, terminal by terminal.
8. Replace everything in reverse order
9.Turn on power
2. Remove grate
3 Remove control knobs
4, Remove two screws holding control panel
5. With wrench, remove locking nuts from control switches
6. Lift panel, exposing switches
7. With new switch in hand, unattach old switch one terminal at a time, attaching new swi ... Read more tch exactly as old switch, terminal by terminal.
8. Replace everything in reverse order
9.Turn on power
Read less
Parts Used:
-
Richard from Beverly Hills, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Wrench set
12 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken exhaust vent cover.
Just removed the broken vent cover.
Injected foaming sealant.
Pushed on the vent cover plate.
Screwed it in place.
More foaming sealant.
Clipped on the flapper and secured the cover.
Injected foaming sealant.
Pushed on the vent cover plate.
Screwed it in place.
More foaming sealant.
Clipped on the flapper and secured the cover.
Parts Used:
-
Richard from Sacramento, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
12 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Motor bearing failure after 34 years.
Important: Down load the helpful assembly diagram for the fan motor and study it for a few minutes. It's very straight forward. Also a good idea is to remove the bottom panel which comes off easy before starting.
My only problem was removing the existing blower/fan wheel without damaging it once I had the assembly on the work b ... Read more ench. It was rusted on tight and managed to remove after a few tries using penetrating oil. The wheel is in stock and I'd suggest buying a new one along with the new motor if I had to do the job again.
Bottom line; the fan motor fit perfect but did have to re-use part of the old existing electric pig tail because the motor does not come with the factory type motor terminal connectors. By using three twist on wire connectors was back in business. The down draft vent works like new.
Wife is happy...
Wade
My only problem was removing the existing blower/fan wheel without damaging it once I had the assembly on the work b ... Read more ench. It was rusted on tight and managed to remove after a few tries using penetrating oil. The wheel is in stock and I'd suggest buying a new one along with the new motor if I had to do the job again.
Bottom line; the fan motor fit perfect but did have to re-use part of the old existing electric pig tail because the motor does not come with the factory type motor terminal connectors. By using three twist on wire connectors was back in business. The down draft vent works like new.
Wife is happy...
Wade
Read less
Parts Used:
-
Wade from CARMINE, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers
9 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!