0434A MTD Tiller - Overview
Models starting with 0434A
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Ground Drive Belt
PartSelect #: PS9172714
Manufacturer #: 954-04032B
This genuine drive belt is an original replacement part sourced directly from the manufacturer and is commonly used in Craftsman lawn mowers and edgers. Made from flexible rubber, it transfers power f...
$31.80
In Stock
Lawn Mower Hex Washer Head Screw
PartSelect #: PS9298768
Manufacturer #: 710-0599
This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part ...
$6.25
In Stock
Hold Down-cable
PartSelect #: PS9167431
Manufacturer #: 946-0605
This cable barrel holder is a genuine OEM part that is designed for use with tillers and snow throwers. Sold as an individual part, this holder measures approximately 1-inch in length and is used to s...
$6.25
In Stock
Control Box-thrott
PartSelect #: PS9157739
Manufacturer #: 831-0823A
The Throttle Box Assembly, or the Throttle Assembly, is a kit that includes the housing, handle, and hardware. It is black and constructed of steel and plastic. It can be installed onto the right hand...
$41.71
In Stock
Cable-clutch Contr
PartSelect #: PS9311819
Manufacturer #: 946-0908
Upgrade your gardening tools with the MTD Clutch Control Cable. This essential tine engagement cable is used in a wide variety of garden tillers, keeping them functioning at peak performance. Versatil...
$92.98
In Stock
Tiller Jamlock Nut
PartSelect #: PS9299545
Manufacturer #: 712-0266A
The Jamlock Nut is a 3/8-16 inch metal nut which can be installed using a socket or wrench set. It's used to secure and lock parts in place. If the part is damaged and comes loose it should be replace...
$6.25
In Stock
Bearing
PartSelect #: PS9167498
Manufacturer #: 941-0155
This authentic OEM bearing measures 0.62 inches inside diameter, and 1.38 inches outside diameter, and is 0.436 inches thick. Silver and balck in color and sold individually, the bearing is comprised ...
$30.11
In Stock
Wsh, Bell., .34 x .872 x .06
PartSelect #: PS9118681
Manufacturer #: 736-0242
Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between variou...
$6.58
In Stock
Washer-lock 5/16
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
$6.42
In Stock
Screw-shld 3/8-24
PartSelect #: PS9164989
Manufacturer #: 938-0689
This shoulder bolt is supplied directly from the original equipment manufacturer. Constructed of hardened metal, the 1/ 2
$13.77
In Stock
Exact Part matches for your search term
[Viewing 1 of 1]
MOTOR
This part number matches the current model number 0434A
PartSelect #: PS19019487
Manufacturer #: 0434A
$58.09
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Mixer began to make a noise on speed two and higher
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do
... Read more
es not make the slight howl sound.
Read less
Parts Used:
-
LISA M from BATESVILLE, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
6 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!