0434 - Overview
Models starting with 0434
Click on the best match to narrow your results.
- 0434 ( 217-430-101 1987 ) MTD Tiller (Mtd Tiller)
- 0434 (1988) MTD Tiller (MTD Tiller Model 0434/1988 Parts)
- 0434/850-0035 (1988) MTD Tiller (18" 5 HP Chain Drive Tiller)
- 04340 ( 40001-49999 1984 ) Toro Chainsaw (Greensmaster 3)
- 04345 ( 50001-59999 1985 ) Toro Chainsaw (Greensmaster 300)
- 04345 ( 60001-69999 1986 ) Toro Chainsaw (Greensmaster 300)
- 04345 ( 70001-79999 1987 ) Toro Chainsaw (Greensmaster 300)
- 04345 (70001-79999) Toro Lawn Mower (04345/Serial: 70001-79999)
- 04345 (60001-69999) Toro Lawn Mower (04345/Serial: 60001-69999)
- 04345 (50001-59999) Toro Lawn Mower (04345/Serial: 50001-59999)
- 0434A (1990) MTD Tiller (MTD Tiller Model 0434A/1990 Parts)
- 0434A ( 212-430-101 1992 ) MTD Tiller (Mtd Tiller)
- 0434A (1991) MTD Tiller (MTD Tiller Model 0434A/1991 Parts)
- 0434A (1989) MTD Tiller (MTD Tiller Model 0434A/1989 Parts)
- 0434A/850-0035 (1989) MTD Tiller (18" 5 HP Chain Drive Tiller)
- 0434B ( 212A430-101 1992 ) MTD Tiller (Tiller)
Keep searches simple, eg. "belt" or "pump".
Screw
PartSelect #: PS9942372
Manufacturer #: 321-10
This is a replacement screw, also known as a shear pin that is used in several pieces of outdoor power equipment. It is made of metal and is approximately 2 inches in length. It is a hex head screw an...
$6.25
In Stock
Nut-lock, Ni
PartSelect #: PS8953555
Manufacturer #: 3296-42
This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secu...
$6.25
In Stock
Lawn Mower Ground Drive Belt
PartSelect #: PS9172714
Manufacturer #: 954-04032B
This genuine drive belt is an original replacement part sourced directly from the manufacturer and is commonly used in Craftsman lawn mowers and edgers. Made from flexible rubber, it transfers power f...
$31.80
In Stock
Lawn Mower Hex Washer Head Screw
PartSelect #: PS9298768
Manufacturer #: 710-0599
This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part ...
$6.25
In Stock
Hold Down-cable
PartSelect #: PS9167431
Manufacturer #: 946-0605
This cable barrel holder is a genuine OEM part that is designed for use with tillers and snow throwers. Sold as an individual part, this holder measures approximately 1-inch in length and is used to s...
$6.25
In Stock
Control Box-thrott
PartSelect #: PS9157739
Manufacturer #: 831-0823A
The Throttle Box Assembly, or the Throttle Assembly, is a kit that includes the housing, handle, and hardware. It is black and constructed of steel and plastic. It can be installed onto the right hand...
$41.71
In Stock
Cable-clutch Contr
PartSelect #: PS9311819
Manufacturer #: 946-0908
Upgrade your gardening tools with the MTD Clutch Control Cable. This essential tine engagement cable is used in a wide variety of garden tillers, keeping them functioning at peak performance. Versatil...
$92.98
In Stock
Tiller Jamlock Nut
PartSelect #: PS9299545
Manufacturer #: 712-0266A
The Jamlock Nut is a 3/8-16 inch metal nut which can be installed using a socket or wrench set. It's used to secure and lock parts in place. If the part is damaged and comes loose it should be replace...
$6.25
In Stock
Bearing
PartSelect #: PS9167498
Manufacturer #: 941-0155
This authentic OEM bearing measures 0.62 inches inside diameter, and 1.38 inches outside diameter, and is 0.436 inches thick. Silver and balck in color and sold individually, the bearing is comprised ...
$30.11
In Stock
Nut-lock, Ni
PartSelect #: PS9276436
Manufacturer #: 3296-29
The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is use...
$6.25
In Stock
Screw-taptite
PartSelect #: PS8950090
Manufacturer #: 32144-1
This authentic manufacturer-sourced screw-taptite is made for use with Toro and Lawn-Boy lawn and garden equipment. It is an identical replacement for a missing or a damaged hardware that was installe...
$6.25
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Mixer began to make a noise on speed two and higher
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do
... Read more
es not make the slight howl sound.
Read less
Parts Used:
-
LISA M from BATESVILLE, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
6 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!