01067-0 Briggs and Stratton Pressure Washer - Overview
Sections of the 01067-0
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Thermal Relief Valve
PartSelect #: PS9270416
Manufacturer #: 208673GS
Sourced directly from the manufacturer, this part is used to open and release hot water if the water exceeds the maximum operating temperature. It has metal and plastic components, is not part of a ki...
$22.62
In Stock
Kit, Unloader
PartSelect #: PS9268742
Manufacturer #: 187879GS
This is an original replacement part sourced directly from the manufacturer. The unloader kit is commonly found in pressure washers from Briggs & Stratton. This part includes a plug made of high-qua...
$55.07
In Stock
Mount, Vibration
PartSelect #: PS9308423
Manufacturer #: 87841GS
The OEM vibration mount is a black rubber part, which is used to prevent vibrations between the frame of the generator and the floor. It can be installed with a screw driver,and its installation is ra...
$6.40
In Stock
Oil Seal
PartSelect #: PS9175910
Manufacturer #: 93680GS
This is a genuine Briggs & Stratton replacement part. The oil seal is designed by the manufacturer for use in pressure washers. This part is placed in the crankcase to prevent inadvertent oil leakag...
$11.29
In Stock
Seal Lo-pres "u" Pak
PartSelect #: PS9163362
Manufacturer #: 93667GS
This authentic item is supplied directly from the original equipment manufacturer for use with generators and pressure washers made by Briggs & Stratton. The seal goes between the pilot spacer and the...
$15.03
In Stock
O-RING, 9.19 ID X 2.62, BLK
PartSelect #: PS18935272
Manufacturer #: 97837GS
This is an authentic component is sourced directly from the original equipment manufacturer. It is the part that is specially made for use with Briggs and Stratton and Snapper pressure washers. The pu...
$4.23
Special Order
Questions And Answers for 01067-0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 01067-0
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Had stripped thread had to rethread and install pump unloaded rebuild kit.
The reinstall was the hardest because the amount of tension with the spring. Had to cobble something together to hold spring tension until I got the new nut plug started. To bad you don’t give instructions and or tools to help with the actual install.
Parts Used:
-
Leonard from SAGINAW, MI
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!