0066030 ((9321971 - 9322000)(2014)) Generac Pressure Washer - Overview
Sections of the 0066030
[Viewing 13 of 13]
Keep searches simple, eg. "belt" or "pump".
Coil Assy., Ignition
PartSelect #: PS9874896
Manufacturer #: 0J35220153
This part is an OEM from Generac for use with Pressure Washers and Generators. The ignition coil attaches on the side of the flywheel and produces the electrical charge to the spark plug. The most com...
$58.66
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No spark. rotted high tension spark plug wire
Removed the machines face plate by drilling out the push pins, removed the air filter assembly. removed throttle linkage, removed anchors of the spark wire from motor housing, removed the recoil start assembly. removed the bolts holding the coil assembly. installed the new coil assembly and placed business card between the coil and the ma
... Read more
gnetic section of the flywheel to secure the proper gap.
Reverse the process and reinstall all the assemblies noted above. I took pictures with my cellphone to ensure that the throttle linkage was properly re-installed.
Reverse the process and reinstall all the assemblies noted above. I took pictures with my cellphone to ensure that the throttle linkage was properly re-installed.
Read less
Parts Used:
-
Stanton from PHILPOT, KY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!