005989R0 (6567060 - 6567085) Generac Pressure Washer - Overview
Sections of the 005989R0
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Spark Plug
PartSelect #: PS9874845
Manufacturer #: 0J00620106
Upgrade your lawn and garden equipment with the Generac Spark Plug. This premium component is designed to produce the spark that ignites the fuel in the engine, enhancing performance and efficiency. C...
$33.12
In Stock
Coil Assy., Ignition
PartSelect #: PS9874896
Manufacturer #: 0J35220153
This part is an OEM from Generac for use with Pressure Washers and Generators. The ignition coil attaches on the side of the flywheel and produces the electrical charge to the spark plug. The most com...
$58.66
In Stock
Assembly Recoil Starter 212cc
PartSelect #: PS12606347
Manufacturer #: 0J08071SRV
This is a genuine replacement part sourced from the Generac manufacturer. The assy, recoil starter 212CC is compatible with some small engines. This item is constructed of intricate metal parts and co...
$72.34
On Order
Fitting, Suction Pw
PartSelect #: PS11923442
Manufacturer #: 0H95650120
It is a genuine part which is supplied by the original manufacturer for use with Generac power washers. The purpose of this fitting is to connect the suction fitting. This is an identical replacement ...
$26.98
In Stock
Questions And Answers for 005989R0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No spark. rotted high tension spark plug wire
Removed the machines face plate by drilling out the push pins, removed the air filter assembly. removed throttle linkage, removed anchors of the spark wire from motor housing, removed the recoil start assembly. removed the bolts holding the coil assembly. installed the new coil assembly and placed business card between the coil and the ma
... Read more
gnetic section of the flywheel to secure the proper gap.
Reverse the process and reinstall all the assemblies noted above. I took pictures with my cellphone to ensure that the throttle linkage was properly re-installed.
Reverse the process and reinstall all the assemblies noted above. I took pictures with my cellphone to ensure that the throttle linkage was properly re-installed.
Read less
Parts Used:
-
Stanton from PHILPOT, KY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!