Mixer Attachments and Accessories
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Mixer Attachments and Accessories
Your Price
$27.36
In Stock
Mixer Flat Beater
PartSelect Number PS11722956
Manufacturer Part Number W10807813
This flat beater is used on stand mixers. It is dishwasher safe, however, should only be washed in the upper rack. The Flat Beater is used to mix batters and light doughs. Should the coating become damaged the beater will become a dull and gray. This part should be replaced when the coating has been damaged.
Fixes these symptoms
- Touchpad does not respond
- See more...
Installation Instructions
Malcolm from Moreland Hills, OH
Was given a very old bvut sturdy Kitchen Aid Mixer missing beaters and having lots of rust on the base.
All I had to do was clean the machine, but the missing beaters were not available at stores. I found the missing parts at PartsSelect and ordered them online. They arrived in two or three days. I had spent two days driving to different stores looking for the parts and found them in my computer. Thanks PartsSelect for great service and having obsolete parts on hand.
Read more...
Your Price
$28.42
In Stock
Mixer Flat Beater
PartSelect Number PS11757063
Manufacturer Part Number WPW10672617
This Flat Beater Part Number WPW10672617 is for Stand Mixers. Attaches to the beater shaft and is for normal to heavy mixtures such as cake batters or cookie dough. This has a powder coated finish.
Fixes these symptoms
- Touchpad does not respond
- See more...
Installation Instructions
MARILYN from St. JOseph, IL
Flat Beater Powdercoat covering was peeling off.
I just traded the old beater for the new. It was just in time for cookie making.
Read more...
Your Price
$33.69
In Stock
Mixer Wire Whip
PartSelect Number PS11757305
Manufacturer Part Number WPW10731415
This wire whip attaches to your stand mixer and is used for whipping food products. It is made of metal wire and is one of several attachments that you can add to your mixer. If you attempt to start your stand mixer with the wire whip attached, and the touchpad does not respond, you may need a new wire whip. Be sure to determine that the issue is with the whip and not with the mixer or another attachment before you replace it.
Fixes these symptoms
- Touchpad does not respond
- See more...
Installation Instructions
Tina from Beverly, MA
broken wire whip for mixer
tossed the broken whip and replaced it with my new one. It took less than a minute.
Read more...
Your Price
$17.05
In Stock
Mixer Whisk Attachment
PartSelect Number PS12008431
Manufacturer Part Number SP0002827
This whisk attachment is an authentic replacement part sourced directly from Breville. It is commonly used in mixers. This attachment is used to add air into a mixture, as well as blend or whip ingredients. It is made of metal and sold individually. It should be replaced if it is damaged or missing. No tools are needed to replace this part; it simply snaps into place.
Your Price
$8.93
In Stock
Your Price
$33.69
In Stock
Mixer Wire Whip
PartSelect Number PS11746928
Manufacturer Part Number WP9704329
This wire whip is for stand mixers.
Wire whip attaches to the beater shaft and incorporates air into cream, eggs and frostings.
Follow the instructions in the owner's manual for using and installing this part.
Fixes these symptoms
- Touchpad does not respond
- See more...
Installation Instructions
Henry from Glasford, IL
Your Price
$13.41
On Order
Mixer Attachment Drink
PartSelect Number PS17581778
Manufacturer Part Number 990104500
This replacement attachment is specially designed for use with Hamilton Beach hand blenders. It is used to mix liquids making it a perfect attachment for mixing drinks. It is an authentic item that is sourced directly from original equipment manufacturer and it is sold individually.
Your Price
$48.45
In Stock
Mixer Flat Metal Beater
PartSelect Number PS16875729
Manufacturer Part Number W11646967
This Flat Beater is used as a mixing attachment for all six quart mixers and some five quart mixers. The Flat Beater is made from metal and has a burnished finish. This part attaches to the mixer on the planetary. The Flat Beater should be replaced if the coating has started to come off or if the arms have bent at all. It is recommended to wash this part by hand to prevent the coating coming off sooner.
Installation Instructions
Mark from El Cajon, CA
Mixer had a broken planetary
Mixer was given to me and I went on the Internet and found Partselect and they had the items I needed to repair the unit. I've worked on appliance's for a long time and for just a few dollars I repaired a $500.00 mixer for less than $35.00. The repair is very simple remove the cover band, then the four (4) cover screws, Then the four (4) gear case cover screws. The top of the old planetary shaft is there remove the snap ring, remove the attachment gear, then remove the pin by pushing it out, push down on the old shaft. Install the new planetary by doing the disassembly in reverse. Mark
Read more...
Your Price
$28.42
In Stock
Mixer Coated Flat Beater
PartSelect Number PS11757062
Manufacturer Part Number WPW10672616
The Coated Flat Beater is an OEM accessory specifically designed for 5 and 6 Quart KitchenAid stand mixers. This flat beater is responsible for thoroughly incorporating ingredients when mixing or blending recipes.
Your Price
$13.41
On Order
Mixer Attachment, Whisk
PartSelect Number PS17581777
Manufacturer Part Number 990104400
This authentic manufacturer-approved replacement component is specially made for use with Hamilton Beach hand blenders. It is an identical replacement for a missing or a faulty attachment that was included with a new unit. The part is designed to whisk ingredients, please make sure to refer to the owners manual of your model for the correct location and application of this part. keep in mind this high-quality whisk attachment is sold individually.