Makita Die Grinder Parts

Makita Die Grinder Carbon Brush Set Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box. rnThis brush set will fit the Makita tools listed at the bottom of the page. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that’s operating intermittently. • New brushes can restore a motor’s electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Makita Die Grinder Carbon Brush Set Genuine Makita replacement part. Set of 2 Carbon Brushes with wire lead attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Makita Die Grinder Switch This is a Push-Button type switch that has 4 terminals, 2 internal and 2 external. This genuine Makita replacement part is sold individually. rnrnSwitches are commonly replaced parts in tools. A switch handles on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually needing replacement. Some common signs of a broken or failing switch are as follows: • The tool has completely stopped functioning - it will not start. • The tool operates intermittently, requiring multiple tries to turn on, until eventually it won't start at all. • The variable speed function and electric braking aren't working properly.

Makita Die Grinder Grinder Switch Button

Makita Die Grinder Brush Holder This is an OEM Makita authorized replacement part used on variety of Makita Power Tools. This part is sold Individually and it includes the spring. The brush holder in keeps the brushes in place and pushes them against the armature with spring pressure. If the Brush holder is broken or bent it needs to be replaced.

Makita Die Grinder Ball Bearing (6001llb)

Makita Die Grinder Collet Cone This is a genuine OEM sourced replacement part designed for use with Makita die grinders. This part provides a grip for holding a bit in a tool. It is made out of metal and is sold individually. This collet is for using bits with 1/4" arbors only. Please note the collet nut is sold separately. Due to prolonged, heavy use a collet adapter may need to be replaced eventually. To replace this item you would need to use a Wrench. • First you would need to remove the collet nut • Once the nut is removed you can remove the old collet adapter • Place a new one in place • Tighten the collet nut back in place and your unit is ready to use 1/4" bits

Makita Die Grinder Switch Lever A This plastic switch lever is specially designed for Makita angle grinders. It connects to the switch and allows user to turn the grinder on and off. Please note this item is sold individually. Please note the switch and switch button are both sold separately. Replacing this switch lever is a pretty simple task that can be done using a screwdriver. • Remove the rear cover • Disconnect the switch and the button • Remove old lever • Secure new lever in place • Reassemble and test the unit

Makita Die Grinder Wrench 17 This is a genuine OEM sourced part which is specially designed for use with Makita equipment. It is an identical replacement for a missing or faulty wrench that was originally included with a new unit. Please make sure to refer to the owners manual for the correct location and application of this item. Keep in mind this high-quality wrench is made of durable metal and is sold individually.

Makita Die Grinder Spring Pin 3-14 This authentic OEM sourced item that is specially designed for use with Makita nailers and laminate trimmers. It is an identical replacement for a missing or damaged spring pin that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable metal and is sold individually.