Hotpoint Garbage Disposer Parts

Hotpoint Appliance Parts
Shop By Appliance Type

Popular Hotpoint Garbage Disposer Parts

Your Price
$19.36
  In Stock
Garbage Disposal Drain Stopper
★★★★★
★★★★★
(33)
PartSelect Number PS12726321
Manufacturer Part Number WC11X20163
The splash guard, also known as a mounting gasket, is used for garbage disposals. The guard creates a tight seal between the sink and the garbage disposal ring. This part is black in color and made of rubber. It covers the top of the sink drain and it opens in the center to allow water and food particles into garbage disposal. It does this while ensuring liquids and food do not splash back into the sink. This should be a solution to your issue of garbage coming back out of the sink. Refer to the instructional diagram provided by the manufacturer for installation instructions.
Fixes these symptoms
  • Garbage comes back up sink
  • Leaking
  • Smells bad
  • See more...
Installation Instructions
Brian from North Charleston, SC
Deteriating splash guard
The splash guard for the disposer was deteriorating and kept falling into the disposer and getting chewed up making it even less reliable. I purchased two different 'universal' splash guards at the hardware store. Neither of them fit. I finally crawled under the sink with my eyeglasses and a flash light to find the model number. I searched for the model number on part select and received veery quickly. I just popped it in (less than a minute) and now everything is wonderful. Don't buy a new disposer (my wife wanted me to) buy the replacement part that is giving you trouble at PartSelect! Read more...
Your Price
$38.78
  In Stock
Sink Flange
★★★★★
★★★★★
(1)
PartSelect Number PS12722852
Manufacturer Part Number WC15X20161
The sink flange attaches to your sink drain opening and provides a connection to mount the disposal unit to the sink itself. If your food waste disposer is leaking, there are a few places that you should inspect. If the leak appears to be coming from around the connection to the sink, look carefully at the sink flange, as there could be an issue with the flange itself, or its gaskets. Remember to disconnect the power from your food waste disposal unit before beginning this repair. This OEM replacement part has an outer diameter of approximately 4.5 inches, and an inner diameter of approximately 3 inches.
Fixes these symptoms
Installation Instructions
Donald from Tampa, FL
Leaky GE Disposall
Mount Ring was very difficult to remove. Hammer needed to unlock. Once removed, rubber and fiber gaskets were easily replaced. Cushion Mount did not attach properly to sink flange after many attempts, so Mount Ring was placed too high for hopper to attach. The cushion mount was finally placed on flange correctly (not sure why it attached incorrectly previously) but all is well with no leaks. Dishwasher hose needed to be re-attached after hopper mounted and locked in position. Read more...
Your Price
$16.95
  In Stock
Flange Gasket - Fiber
PartSelect Number PS6883604
Manufacturer Part Number WC03X10008
This item is sold individually. The fiber sink flange gasket works with your food waste disposer. This part creates a seal that prevents any water from leaking. It is positioned between the sink flange and the disposal mounting ring. The flange may break apart over time and cause leaking and will need to be replaced. The flange gasket is donut shaped and is 4 inches in diameter. Before beginning this repair make sure the power to the food waste disposer has been disconnected. This is an OEM part that is obtained right from the manufacturer.
Fixes these symptoms
Installation Instructions
Donald from Tampa, FL
Leaky GE Disposall
Mount Ring was very difficult to remove. Hammer needed to unlock. Once removed, rubber and fiber gaskets were easily replaced. Cushion Mount did not attach properly to sink flange after many attempts, so Mount Ring was placed too high for hopper to attach. The cushion mount was finally placed on flange correctly (not sure why it attached incorrectly previously) but all is well with no leaks. Dishwasher hose needed to be re-attached after hopper mounted and locked in position. Read more...
Your Price
$22.46
  In Stock
Disposer Splash Guard
★★★★★
★★★★★
(1)
PartSelect Number PS257945
Manufacturer Part Number WC3X124
This splash guard attaches to the garbage disposal in your sink, and prevents water and food debris from splashing back up when the disposal is operating. If your current splash guard is damaged, you should consider replacing it. This part is black in color, and is made of rubber. It is approximately 3 inches in diameter. This splash guard has a small opening in the middle that is approximately 1/4-inch in diameter, as well as 12 smaller openings and slits that allow you to feed water and food items into the garbage disposal. This product is sold individually, and works in conjunction with the stopper, part 3506779.
Installation Instructions
Aubrey from Hugo, OK
Splash guard worn out
pulled out the old and stuck in the new--so easy a caveman could do it. Read more...
Your Price
$9.34
  In Stock
SUPPORT RING
★★★★★
★★★★★
(1)
PartSelect Number PS7783352
Manufacturer Part Number WC05X10002
Your Price
$13.98
  In Stock
BATCH FEED DISPOSER STOPPER ASM
★★★★★
★★★★★
(2)
PartSelect Number PS12726320
Manufacturer Part Number WC11X20162
This stopper is designed for use with garbage disposals. If your disposal will not start, will not run properly, or is starting to smell bad, repairing it could be as simple as replacing the stopper. As the stopper ages, the rubber seals might become brittle or worn down. This means that it might not stay in place while the disposal is cycling, and when it is not cycling it will no longer seal the drain well enough to contain odors. This stopper is sold individually, and has an approximate diameter of three inches. You need no tools to successfully replace this part.
Your Price
$25.45
  Special Order
PLUNGER BTN
PartSelect Number PS257418
Manufacturer Part Number WC1X222
Installation Instructions
Alan from HOPEWELL, VA
No stoppet
Put it in the hole. Read more...
WASHER
PartSelect Number PS257422
Manufacturer Part Number WC1X228
Your Price
$6.24
  Special Order
THRUST WASHR
PartSelect Number PS257424
Manufacturer Part Number WC1X237
Your Price
$2.44
  Special Order
RETAING RING
PartSelect Number PS257426
Manufacturer Part Number WC1X240

Appliance Type

Popular Hotpoint Garbage Disposer Models

Below are the most popular Hotpoint Garbage Disposer models we have. Enter your model number in the search box to find your model.