Hoover Canister Vacuum Parts

Why Genuine OEM Matters

Shop By Appliance Type

Popular Hoover Canister Vacuum Parts

Agitator Bearing Assembly – Part Number: H-43267002

Your Price

$4.08

Hoover Canister Vacuum Agitator Bearing Assembly

PartSelect Number PS12067086

Manufacturer Part Number H-43267002

This is a genuine OEM replacement part sourced directly from Hoover. A bearing is used on each end of the brush roll agitator, allowing it to spin freely. These parts are used to reduce friction and damage between moving parts. They are designed for a high-wear function and are therefore easy to install and replace. This part is sold individually; note that most machines require a pair of bearings.

Secondary Filter – Part Number: H-38765009

Your Price

$4.08

Hoover Canister Vacuum Secondary Filter

PartSelect Number PS12066575

Manufacturer Part Number H-38765009

This is an authentic Hoover filter designed for use in many vacuums. While a primary filter cleans the debris from the suctioned air, this primary filter cleans the air released by the primary filter. It is held in place on the machine by the Filter Retainer, part # 37944005. This package contains one filter.

Your Price

$10.76

Hoover Canister Vacuum Brush Carrier

PartSelect Number PS12067631

Manufacturer Part Number H-47318008

Hose Assembly Complete-5.5 – Part Number: H-43434223

Your Price

$18.85

Hoover Canister Vacuum Hose Assembly Complete-5.5

PartSelect Number PS12067152

Manufacturer Part Number H-43434223

This is a genuine Hoover stretch-style hose. It is used with vacuums and blowers. This hose has 1-1/4" openings on either end. It is designed to twist lock into place for quick and easy set-up. This assembly includes one stretch hose, one Latch Ring (part # H-36153021), and one Hose Connector (part # H-12593).

Your Price

$4.08

Hoover Canister Vacuum Belt

PartSelect Number PS12066418

Manufacturer Part Number H-38528011

This belt is an OEM direct from Hoover. The rubber composite belt is compatible with a variety of vacuum models, and is sold individually. This part transfers power from the motor to the brush roll assembly. You will need a screwdriver for the installation.

Installation Instructions

Mike from Belfair, WA

vac swallowed some waste and caused the belt to jam and break

this was the beater-bar unit, Turned upside down, about 6 screws, cleaned out assy, replaced belt--almost a 3 hand operation Read more...

Dust Bag W/rubber Ring – Part Number: RO-KE0111

Your Price

$83.28

Hoover Canister Vacuum Dust Bag W/rubber Ring

PartSelect Number PS10473250

Manufacturer Part Number RO-KE0111

This is a genuine replacement part manufactured for use with commercial backpack vacuums. This cloth dust bag is used to collect debris inside the canister. The bag includes the rubber ring that is used to secure the bag to the cannister, and provide a seal for the dome lid. The bag is washable for multiple uses, but should be replaced as part of normal maintenance. The dust bag is sold individually.