Exmark Lawn Mower Springs and Shock Absorbers

Exmark Lawn Mower Spring-torsion This item is a genuine Toro replacement part that has been OEM sourced and is intended to be used with walk-behind lawnmowers. The metal spring is used to keep the side discharge chute in the down position pressed against the deck. This item is available as an individual replacement part.

Exmark Lawn Mower Spring-compression This is a compression spring that is used within various models of lawn mowers and is used to provide stability and extra control to the user during the operation of the equipment. This spring works in tandem with the rest of the axle assembly, such as the key, which is a small metal component that is inserted into slots on rotating parts like axles, to secure things such as wheels, within the entire assembly. If you notice wobbling, excessive vibrations or difficulty in maneuvering the lawnmower, the compression spring is likely worn, damaged or has lost its tension, and needs replacement. This compression spring is made of metal, is sold as an individual part meaning you will need to consider ordering 2 (one for each side of the lawnmower) and measures approximately 1/3-inch long. To replace this compression spring, you will need a socket wrench, flathead screwdriver and snap-ring pliers. It is recommended you prop your lawnmower up on a piece of scrap wood to make the removal and installation of the new tire easier. Use the flathead screwdriver, if necessary, to remove any wheel covers on your lawnmower, and then use the socket wrench to loosen and remove the wheel. Use some snap-ring pliers to remove the retaining ring on the outside of the wheel axle - you should then be able to remove the pinion connected to the axle. With the pinion out, you can remove the key in its keyway, and underneath should lie the compression spring, which can now be replaced. If you notice any of these parts that are also being removed are worn out or damaged, you will want to replace them immediately to prevent any future performance problems with your lawnmower.

Exmark Lawn Mower Spring: Linkage This replacement spring-linkage is an authentic OEM component which is Kohler engines that are commonly installed on a variety of lawn and garden equipment. The spring connects governor lever applying tension on the part and allowing it to retract. Over time it may wear out or get damaged eventually requiring a replacement to ensure your equipment functions properly. Note, this high-quality spring-linkage is made of durable metal and is sold individually. You will need pliers to remove the old part and secure the new one. Refer to the appropriate diagrams of your specific model for the exact location of this component.

Exmark Lawn Mower Washer-spring

Exmark Lawn Mower Spring-torsion This is a genuine replacement item that is supplied directly from the original equipment manufacturer for use with Toro and Lawn Boy riding lawn mowers and garden tractors. It is a special spring for the deflector. This part provides an identical replacement for a missing or a faulty spring that was installed on a new unit, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

Exmark Lawn Mower Spring: Valve This is an authentic replacement part manufactured for use with Kohler small engines. The valve springs are used to compress when the valve is open and extend to close the valve. The intake and exhaust valves use this spring, and it is sold individually.

Exmark Lawn Mower Spring-extension This is an authentic Toro replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The extension spring is part of the deck assembly. This item is used to link the cable and the idler extension to engage the idler pulley to allow the belt to drive the blades. This item is sold as an individual replacement part.

Exmark Lawn Mower Spring-extension

Exmark Lawn Mower Spring, Choke Return This durable OEM supplied component is made for use with Kohler engines commonly installed on lawn and garden equipment. It is the special spring that applies tension on the choke return. This is an identical replacement for a missing or a faulty hardware that was installed on a new unit. Refer to the diagrams of your specific model for the exact location and the correct installation of this component. One durable metal spring is included.

Exmark Lawn Mower Spring-extension