Engine Ice Makers

Engine Valve Rocker Arm

★★★★★

★★★★★

1 Review

This is an exhaust valve rocker arm used for small engines and equipment like pressure washers. Rocker arms transmit motion from a camshaft to valves, controlling valve timing and duration. If your engine struggles to start, misfires, or will not start, inspect the rocker arm(s) for excess play, wear, or bending due to high temperatures. To replace it, disconnect the spark plug and/or starting coil, remove the valve cover, and locate the rocker arm(s). Rotate the camshaft until pistons are up and rocker arms are loose. Slide out the pin, remove the old rocker arm, and install the new one with its pin. Tighten the adjustment screw to the manufacturer specifications, reinstall the spark plug, replace valve cover sealant, and reattach the cover.

Engine Valve Rocker Arm

★★★★★

★★★★★

1 Review

Engine Arm- Valve Rocker This is a genuine item that is supplied by the original equipment manufacturer for use with Honda that are commonly installed on a variety of lawn and garden equipment. It is a special component that opens and closes the valve. Over time it may wear out or get damaged eventually requiring a replacement. This high-quality arm-valve rocker is made of durable metal and is sold as an individual part. To ensure the proper repair procedure, refer to the appropriate diagrams for your model. A wrench set will be needed to take the cylinder head apart when replacing this arm-valve rocker.

Engine Arm, Rocker This authentic component is supplied directly from the original equipment manufacturer for Kohler engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or a faulty rocker arm that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this item. Keep in mind this high-quality part is made of durable metal and is sold individually.

Engine Arm- Governor This part is available as an individual replacement. The governor arm attaches to the governor rod and is made of metal. A screwdriver, a set of pliers, and an adjustable wrench might be needed during the installation process. This part may become broken and will need to be replaced. It is a genuine item that is supplied by the original equipment manufacturer for use with engines and lawn mowers made by Honda, Toro, and Lawn Boy.

Engine Arm-governor

Engine Arm- Governor The governor arm attaches to the throttle return spring and the governor rod. This item is made of metal and is available individually. This part is an OEM from Honda for use in engines and snowblowers. When replacing this part a socket set and an adjustable wrench might be required during the installation process. It will need to be replaced if it becomes broken.

Engine Arm-governor

Engine Arm- Governor

Engine Governor Arm Kit