Electric Drill Hardware

Electric Drill Socket Head Screw This is a genuine Milwaukee replacement part, it is sold individually. The purpose of the 06-75-3150 Screw is to secure the chuck to the spindle of the models listed below. This is a left hand threaded screw, to remove it turn it clockwise. We do have an article and video on

Electric Drill Chuck Screw This is a genuine manufacturer-supplied part that is made for use with Milwaukee hammer drills. It is a special screw that is utilized to secure the chuck. Commonly, screws may need to be replaced due to worth threads or a head socket. It provides an identical replacement for a missing or a faulty hardware that was included with a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this screw. It is a left hand thread screw. Keep in mind this high-quality part is made of durable metal and is sold individually. NOTE: We have an article and a video on how to remove a chuck from a drill, here is the link to it. <a href="http://www.ereplacementparts.com/article/890/How_to_Remove_a_Drill_Chuck.html" target=blank_<u>How to Remove a Drill Chuck </a>

Electric Drill Brush Cap This is a genuine Milwaukee replacement part, it is sold individually. This Brush Retaining Screw (Brush Cap) is used on the model numbers shown below. The purpose of this part is to secure the brushes in the brush holder To remove this part ,simply use a flat head screw driver. Don't use too much pressure on it, they do have a tendency to break.

Electric Drill Plain Washer This is a genuine OEM part sourced from the manufacturer. Sold individually. Washer provides a bearing surface for fastener load distribution or acts as a spacer. Is used in a number of impact drivers, listed below.

Electric Drill Screw This screw is commonly used on a variety of power tools. It is a genuine OEM sourced replacement part. Please make sure to check appropriate diagrams for correct location and use of this screw. Includes one pan head screw per order. You will need a screwdriver to install or remove it.

Electric Drill Screw This is a genuine manufacturer sourced replacement screw. It is commonly used with electric drills. This left hand threaded screw is specially designed to secure drill chuck to the spindle. It is made out of metal and it is sold individually. Requires a hex key/allen wrench to tighten/loosen this screw

Electric Drill Screw This screw is s a standard hardware which has multiple uses based on equipment. It is a genuine OEM sourced part, not an aftermarket equivalent. It is commonly used on a variety of Black and Decker and Dewalt power tools. Please make sure to check appropriate diagrams for correct location and applications for this item. It a metal screw that is sold individually. You will need a torx screwdriver to tighten or loosen this screw.

Electric Drill Screw This replacement screw is a high quality hardware commonly utilized on Bostitch, Black and Decker, Porter Cable and Dewalt equipment. This is a authentic OEM item which has multiple applications depending on the unit, for correct location and use of this screw make sure to check appropriate diagrams. Please note this torx screw is sold individually.

Electric Drill Reverse Thread Chuck Screw This screw is a genuine Dewalt chuck screw. It is constructed of tough steel for long life. It has a beveled head with torx drive for a secure fit. This screw is reverse thread for securing drill chucks. It also has locking compound within the threads for an even tighter installation. This screw is commonly found in Dewalt cordless drills and it is compatible with the tools listed below. It is not guaranteed to fit any other power tools.

Electric Drill Screw Manufacturer sourced replacement part designed for use with Milwaukee power tools. It is a standard hardware which will have multiple applications based on your tool. This part is made out of metal and it is sold individually. Requires a a torx screwdriver to tighten/loosen this screw.