Cub Cadet Chipper Shredder Exhausts

Your Price

$49.98

PartSelect Number PS9294908

Manufacturer Part Number 693593

The purpose of a muffler is to soften the noise coming from the engine. It is an authentic replacement part that is sourced directly from original manufacturer for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. Please note this high quality item is sold individually.

Installation Instructions

Philip from LINEVILLE, AL

Needed to replace muffler

Using a socket wrench with extension and a T20 star socket (you can use the appropriate hex head socket also) i removed to two bolts holding the muffler on. They are right on top of the engine and very accessible. Your model may have a heat shield that needs to be removed. Once the muffler is off remove the old gasket. It may be stuck to the muffler or exhaust opening on the engine. It should just pry of with a little effort. I did make sure there were no gasket pieces left behind. I placed the bolts through the flange of the new muffler and then slid the new gasket over the bolts. You can use a exhaust gasket sealant just hold it place while you place the flange in place and not have to worry about gasket dropping off. I just held it until I got the flange in place. I started the bolts by hand using the socket and extension. I alternated from each bolt until I had tighted it down. You can look up torque specs. I just used my grunt meter. It is good as new. Parts were OEM replacement. Not knock off almost right parts. I got very lucky when I found this company and will use them again. Read more...

Your Price

$15.52

Cub Cadet Chipper Shredder Muffler Stud Asm

PartSelect Number PS9312190

Manufacturer Part Number 951-10342

Your Price

$38.24

Cub Cadet Chipper Shredder Muffler

PartSelect Number PS9064836

Manufacturer Part Number 692038

It is a genuine OEM sourced replacement muffler that is specially designed for Briggs and Stratton engines that are commonly installed on Toro lawn and garden equipment. Its purpose is to soften the noise coming from the engine and provide an additional layer of filtration of exhaust. This durable metal muffler is sold individually, it is manufactured to meet EPA exhaust regulations. Hardware to secure the muffler and the gasket are all included.

Your Price

$6.78

Cub Cadet Chipper Shredder Stud M6 X 95

PartSelect Number PS9298730

Manufacturer Part Number 710-05094

Your Price

$70.72

Cub Cadet Chipper Shredder Muffler

PartSelect Number PS11829355

Manufacturer Part Number 594001

This is a genuine replacement component for Briggs & Stratton engines. The muffler is designed to attach to the exhaust of the engine to muffle the sound output of the engine as well as prevent sparks from escaping. The replacement part is made of high-quality metal. This item is sold individually.