Craftsman Angle Grinder Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Craftsman Angle Grinder Parts
Your Price
$6.40
In Stock
Craftsman Angle Grinder Carbon Brush
PartSelect Number PS10188358
Manufacturer Part Number N097696
Genuine Dewalt replacement part This brush is sold individually, 2 are needed for the tools shown below It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Your Price
$9.52
In Stock
Craftsman Angle Grinder Hex Hole Flange
PartSelect Number PS10188627
Manufacturer Part Number N134467
This is an Original Manufacturer Sourced replacement part used on Dewalt Angle Grinders. This part is made out of Metal and it is Sold Individually. The purpose of this Hex Hole Flange Nut is to hold the Grinding Wheel to the Spindle Shaft. You would need Hex Wrench to secure this part.
Your Price
$6.40
In Stock
Craftsman Angle Grinder Clamp Washer
PartSelect Number PS10188483
Manufacturer Part Number N115381
This is a Genuine Manufacturer Sourced replacement part used on Dewalt Angle Grinders. The purpose of this Clamp Washer is to provide support for the Grinding Wheel to the Spindle Shaft. This Clamp Washer is made out of Metal and it is Sold Individually. You would need Hex Wrench to replace this part.
Your Price
$27.10
In Stock
Craftsman Angle Grinder Power Cord
PartSelect Number PS10169875
Manufacturer Part Number 330072-98
Length: 8'
Gauge: 18
Wires: 2
Type: Bare Wire
This cord is a genuine DeWalt replacement part. This cord is compatible with the list of models below. This part is made for double insulated tools It is a two wire cord with two prongs and does not need a ground wire. The cord is sold individually. Installation of this part requires the new cord wires to go correctly into wire terminals also routing the cord and wires in the right path can help avoid pinching when the tool case (Plate) is put back into place.
Your Price
$12.14
In Stock
Craftsman Angle Grinder Brush
PartSelect Number PS12410247
Manufacturer Part Number 445861-25
(Sold Individually)
This motor brush is for grinders.
The motor brush transfers electric current to the spinning armature in the motor.
Unplug the grinder before installing this part. Wear work gloves to protect your hands.
Your Price
$6.40
In Stock
Craftsman Angle Grinder Ball Bearing
PartSelect Number PS10188594
Manufacturer Part Number N130916
This part is available as an individual replacement. The ball bearing fits between the bearing cup and the slinger. A screwdriver might be necessary during the installation of this part. This item is made of metal and may become worn down and will need to be replaced. It is a DeWALT replacement part directly sourced from the manufacturer for use in angle grinders.
Your Price
$6.40
In Stock
Craftsman Angle Grinder Switch
PartSelect Number PS11929683
Manufacturer Part Number N327459
This plastic switch is supplied by the original manufacturer. It is used in DeWALT small angle grinders. This is a push-button switch controlling on-off functions. One (1) switch is included. Please note that linkage and button slider are sold separately. • Disassemble housing • Remove wiring from the old switch • Disconnect switch from linkage • Reconnect new switch and reassemble housing
Your Price
$19.07
In Stock
Craftsman Angle Grinder Wrench
PartSelect Number PS10172231
Manufacturer Part Number 401680-00
This wrench is an OEM direct from Craftsman for angle grinders. This part helps the motor shaft stay in place when the user pulls out or replaces the grinder disc. It is recommended to review your models diagram to verify the parts compatibility. This part is made of metal and sold individually.
Your Price
$6.40
In Stock
Craftsman Angle Grinder Carbon Brush
PartSelect Number PS10172331
Manufacturer Part Number 402874-03
Genuine Dewalt replacement part This brush is sold individually, 2 are needed for the tools shown below It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Your Price
$6.43
In Stock
Craftsman Angle Grinder Nut Disc
PartSelect Number PS10184173
Manufacturer Part Number 68254-02
This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with angle grinders. The metal disc nut is used to secure the grinding discs to the spindle assembly. This item is available as an individual replacement part.
Craftsman Angle Grinder Appliance Types
Popular Craftsman Angle Grinder Models
Below are the most popular Craftsman Angle Grinder models we have. Enter your model number in the search box to find your model.
- 900277421 Grinder
- 900277230 Angle Grinder
- 900277422 Grinder
- 900245440 Angle Grinder
- CMCG451B (Type 1) Angle Grinder
- CMCW220B (Type 1) 20v Mx Rndm Orb Sndr
- CMCG400B (Type 1) 20v Mx Sml Angl Grn
- 900277420 Grinder
- CMEG100 (Type 1) 4.5 6a Small Angle
- CMEG100 (Type 10) 4.5 6a Small Angle
- 900277031 Grinder
- 900245420 Angle Grinder
- CMCG400M1 (Type 1) Angle Grinder
- 90011650TY1 Grinder
- 900264370 Grinder
- 900277040 7" Angle Grinder
- 90011651TY1 Grinder
- 17227270 Grinder
- CMEG200 (Type 15) Angle Grinder
- CMEG200 (Type 5) Angle Grinder