Briggs and Stratton Snow Blower Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Briggs and Stratton Snow Blower Parts
Your Price
$19.83
In Stock
Briggs and Stratton Snow Blower Drive Belt
PartSelect Number PS8891963
Manufacturer Part Number 1733324SM
This is an authentic OEM sourced driver belt, not an aftermarket equivalent. It is specially designed for a variety of snow throwers. This is the main drive belt for the unit that will spin the augers. Please make sure to check appropriate diagrams for correct location and application of this item. It is made from durable rubber material and it is sold individually. You would need a set of wrenches to complete this repair.
Fixes these symptoms
- Drive system does not work
- See more...
Installation Instructions
Kenneth from ALDAN, PA
Refurbishing for next winter season
I replaced the auger belt and drive belt by separating the machine. The auger belt alone can be replaced by simply tilting without separating but the drive belt can not. So after separating the machine, I removed the auger belt by loosening the belt guide and removing the tensioner. I then loosened the nut that secures the drive wheel. This gave me enough play to remove the drive belt from the drive tensioner and then wiggle it from the drive wheel and out of the machine. Install by wiggling the belt back behind the drive wheel until you can slip it on the wheel. pull tensioner pulley out of the way to get the belt on the top pulley. Tighten the nut to secure the drive wheel. Reconnect the machine at the bottom of the auger housing and replace the auger belt, tensioner, and belt guide. Complete by replacing the upper bolts that hold the two parts together. I have not replaced the friction wheel as of yet. My process took 30 - 45 minutes for both belts.
Read more...
Your Price
$9.39
In Stock
Briggs and Stratton Snow Blower Bearing, Ball 11/16x1
PartSelect Number PS8887153
Manufacturer Part Number 1705897SM
This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for the rotating parts in your equipment and reduces the amount of friction they are subject to during use. If the bearing is not adequately lubricated or has worn down, you may hear grinding or squeaking from your equipment and notice excessive vibration when in use. It is important to address this issue promptly as a faulty ball bearing can potentially damage the parts located near it. To replace the ball bearing, use a pry bar or bearing puller to pry it out of its housing. Clean the housing thoroughly and press your new ball bearing in position. Note that when pressing the ball bearing into place, apply force only to the outer portion of the bearing.
Your Price
$13.40
In Stock
Briggs and Stratton Snow Blower Greased Bearing
PartSelect Number PS9270711
Manufacturer Part Number 2108202SM
This Ball Bearing is an individually sold, silver/black, metal part. It reduces friction in the spindle assembly between the spindle shaft and the spindle housing. If broken due to wear/fatigue, you will hear a grinding, growling, rumbling or screeching sound, and should replace the part. Refer to your make, model and diagrams to ensure this is the right part for you.
Your Price
$23.65
In Stock
Briggs and Stratton Snow Blower Belt
PartSelect Number PS9042546
Manufacturer Part Number 585416MA
This Auger Drive Belt is an original part from Craftsman for use with Craftsman Snowblowers. The auger drive belt rotates the auger on the snowblower. The most common reason for replacing the drive belt is when the snowblower auger won't turn.This part is sold individually. Her is a list of tools that are needed to replace the auger drive belt are a 3/8 inch socket, 9/16 inch wrench, adjustable wrench and a clamp.
Installation Instructions
Rick from River Edge, NJ
Your Price
$13.94
Special Order
Briggs and Stratton Snow Blower Clutch Cable (28.44l)
PartSelect Number PS9894293
Manufacturer Part Number 1501123MA
This is an authentic manufacturer-sourced item that is specially designed for Murray and Simplicity snowthrowers. It connects the control lever to the clutch in the drive system allowing a user to engage and disengage the unit. Please note this durable rubber insulated metal clutch cable is sold individually. Make sure to refer to the appropriate diagrams of your model for the correct location and application of this component.
Your Price
$5.16
In Stock
Briggs and Stratton Snow Blower Shear Pin
PartSelect Number PS9999468
Manufacturer Part Number 703063
Shear Pins are designed to break off in order to prevent further damage to your machine. Because they are designed to break, we recommend having a few spares on hand. This part is made of metal, is silver, is not part of a kit or assembly, and is sold individually.
A Shear Pin will break when you hit a large chunk or ice or other debris. Once it is broken, it will need to be replaced. You will need pliers to complete this repair.
Customers rate this repair as Easy.
Your Price
$31.00
In Stock
Briggs and Stratton Snow Blower Wheel Friction 4.3 Ru
PartSelect Number PS9263021
Manufacturer Part Number 1501435MA
This is an original part from Craftsman for use with Craftsman Snowblowers. The fiction wheel assembly meshes with the friction disc, causing the drive wheel axle to turn. The most common reason for replacing the friction wheel is when the snowblower's wheels don't turn.This part is sold individually. Disconnect the spark plug wire before installing this part. The tools that you will need to replace the friction wheel disc are 3/8" socket, 9/16" socket, adjustable wrench, hammer, 1/2" socket, flat-head screwdriver, and lubrication.
Fixes these symptoms
- Drive system does not work
- See more...
Installation Instructions
Kenneth from ALDAN, PA
Refurbishing for next winter season
I replaced the auger belt and drive belt by separating the machine. The auger belt alone can be replaced by simply tilting without separating but the drive belt can not. So after separating the machine, I removed the auger belt by loosening the belt guide and removing the tensioner. I then loosened the nut that secures the drive wheel. This gave me enough play to remove the drive belt from the drive tensioner and then wiggle it from the drive wheel and out of the machine. Install by wiggling the belt back behind the drive wheel until you can slip it on the wheel. pull tensioner pulley out of the way to get the belt on the top pulley. Tighten the nut to secure the drive wheel. Reconnect the machine at the bottom of the auger housing and replace the auger belt, tensioner, and belt guide. Complete by replacing the upper bolts that hold the two parts together. I have not replaced the friction wheel as of yet. My process took 30 - 45 minutes for both belts.
Read more...
Your Price
$22.52
In Stock
Briggs and Stratton Snow Blower Filter--fuel (white, 75 Microns)
PartSelect Number PS9278033
Manufacturer Part Number 394358S
This Fuel Filter is a white plastic part attached within the fuel delivery system between the fuel tank and carburetor. Installation is rated as "Easy" and requires a set of pliers and a screwdriver. If broken, there may be a leak or blockage and the part should be replaced. The part may also need to be replaced according to manufacturer's specifications, and is a manufacturer-approved part. Refer to your make, model and diagrams to ensure this part is correct.
Your Price
$55.08
On Order
Briggs and Stratton Snow Blower Assembly Chute
PartSelect Number PS9304189
Manufacturer Part Number 762222MA
Snow blower discharge chute.
Your Price
$6.20
In Stock
Briggs and Stratton Snow Blower Lawn Mower Nut
PartSelect Number PS9999668
Manufacturer Part Number 703409
This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten using a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.
Briggs and Stratton Snow Blower Appliance Types
Popular Briggs and Stratton Snow Blower Models
Below are the most popular Briggs and Stratton Snow Blower models we have. Enter your model number in the search box to find your model.
- 1695196 1695196 - Hitch, Sub Frame, 42" Snowthrower
- 1695360 1695360 - Snowthrower, Two Stage, 42"
- 627804X89D 627804x89d - Dual Stage Snow Thrower (2002)
- 624505X4D 624505x4d - Dual Stage Snow Thrower (2003)
- 622505X0B 622505x0b - Dual Stage Snow Thrower (2004)
- 627804X89C 627804x89c - Dual Stage Snow Thrower (2001)
- 624804X79B 624804x79b - Dual Stage Snow Thrower (2000)
- 620301X4D 620301x4d - Single Stage Snow Thrower (2001)
- 633129X5A 633129x5a - Dual Stage Snow Thrower (2003)
- 624504X4B 624504x4b - Dual Stage Snow Thrower (2002)
- 1695565 1695565 - Brute 525/21, Single Stage Snow Thrower (2008)
- 1695576 1695576 - Brute 29" 13.5 Tp Snowthrower (2008)
- S1228 28-Inch Snow Thrower, 11.5 Gross Tp
- S1228 28-Inch Snow Thrower, 11.5 Gross Tp
- 621450X4E 621450x4e - Single Stage Snow Thrower (2001)
- 1695373-6271200X43 1695373 - 6271200x43, Dual Stage Snowthrower (2007)
- 1697355-00-S1224 1697355-00 - S1224, 11.5 Gross Tp 24" Dual Stage Snowthrower (2020)
- 1696505-00-1730HD 1696505-00 - 1730hd, B&s 16.5 Gross Tp 30" Dual Stage Snowthrower (2015)
- 1695520-18-2816-89SN421 1695520 - 18-2816-89 Castelgarden Sn421, Single Stage Snow Thrower (2008)
- 1696614-02-1024MD 1696614-02 - 1024md, B&s 9.5 Gross Tp 24" Dual Stage Snowthrower (2018)