Bolens Snow Blower Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Bolens Snow Blower Parts
Your Price
$6.40
In Stock
Bolens Snow Blower Shear Pin, .25
PartSelect Number PS9110822
Manufacturer Part Number 738-04124A
This individually sold shear pin is an OEM replacement that is most typically used in snowblowers but can also be used within snowblower attachments for lawn tractors. Its main uses are connecting the auger and auger shaft, which are the rotating blades, and to protect more valuable components such as the transmission.If the snow is causing excessive force or there is a jam within the auger and connected housing,it will cause the shear pin to snap, effectively stopping the rotation of the auger, while the auger shaft and gears will continue turning. If the shear pin snaps, snow will simply build up on the outside of the auger housing, since the auger will no longer spin. This shear pin has a .25-inch diameter, and 1.5-inch length and is sold individually. Most augers have a pin on each side, so you may need to purchase more than one, and it is also recommended that you carry spare pins in case of a future breakage.
Fixes these symptoms
- Auger will not turn
- See more...
Your Price
$6.40
In Stock
Bolens Snow Blower Pin-bow Tie Cotter
PartSelect Number PS9096195
Manufacturer Part Number 714-04040
Sourced directly from the manufacturer, this replacement part is designed to secure otherwise loose parts in place, allowing the machine to operate properly. This Bow Tie Cotter Pin is not part of a kit or assembly and is sold individually. It is silver, made of metal, and is used in a variety of models for various purposes.
This part needs to be replaced when it is broken or damaged, or the threads have become stripped. Depending on their location, this part is known to wear with regular use. You will need a wrench or socket set to complete this repair.
Customers rate this repair as Easy.
Fixes these symptoms
- Auger will not turn
- See more...
Your Price
$6.40
In Stock
Bolens Snow Blower Nut-flglk 5/16-18
PartSelect Number PS9092936
Manufacturer Part Number 712-04063
This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your owners manual to determine the exact location.
While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations.
Customers rate this repair as Easy.
Your Price
$6.40
In Stock
Bolens Snow Blower Carriage Bolt 5/16-18 X 3/4" Lg.
PartSelect Number PS9298671
Manufacturer Part Number 710-0451
This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the nut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.
Your Price
$6.40
In Stock
Bolens Snow Blower Lawn Mower Flanged Lock Nut
PartSelect Number PS9095080
Manufacturer Part Number 712-04065
Designed for use in various models of lawn and garden equipment, this part is not sold as part of a kit or assembly. It is made of metal, is gold in color, and is sold individually. This part may also be called a Flange Lock. This nut is designed to lock in place, preventing vibrations and other parts coming loose.
This nut may be located in multiple locations on your machine, refer to your owners manual to determine if this is the correct part. You will need a wrench or socket set and a torque wrench to complete this repair. You should only torque the nut to the manufacturer recommendation, no tighter.
You will need to replace this part when it is worn or damaged. While this part can wear through regular use, it is most commonly damaged through improper use of a wrench or socket.
Customers describe this repair as Easy.
Installation Instructions
Carl from DECATUR, TX
Seized bearing and spacer on bolt shaft for idler pulley
Unfortunately I couldn’t find the spacer on the Internet, so I ended up going to the hardware store and buying multiple sizes of spacers and bearings to complete the install. I ended up using a steel spacer with shoulder and two bearings. Way overkill, but worth the three dollars.
Read more...
Your Price
$6.40
In Stock
Bolens Snow Blower Nut-flglk
PartSelect Number PS9299574
Manufacturer Part Number 712-04064
Also referred to as a Lock Nut or Flange Lock, this nut is designed for use with various lawn and garden equipment. The purpose of this part is to hold parts in place while resisting loosening when properly threaded. It is sold individually, not as part of a kit or assembly. It is black, made of metal, and is found in a variety of locations. Refer to your owners manual to determine if this is the correct part.
This part will need to be replaced when it is weak or broken. The symptoms experienced when this part breaks will depend on its location. You will need pliers to complete this repair.
Customers rate this repair as Easy.
Your Price
$17.67
In Stock
Bolens Snow Blower Clip-hold Down (nylon)
PartSelect Number PS9903766
Manufacturer Part Number 1724869099
Hold-down clips, also known as retaining, locking or fastening clips, are designed to secure and fasten specific parts within equipment, and the use depends on the type and model. This hold down clip is used to secure the chute of various models of snowblowers, and is sold as an individual OEM part, without any securing hardware. Made of nylon, this clip secures to the chute with two screws and two washers. If you notice a wobbly or insecure chute resulting in excessive vibrations from the chute, check to make sure the clip is in-place before inspecting it for damage and ordering a replacement. To replace this clip, you will need to gain access to the chute, with either a screwdriver or wrench, and once you can access it, it is as simple as unscrewing the old clip and installing the new clip and rest of the assembly.
Your Price
$6.92
On Order
Bolens Snow Blower Flange Bushing
PartSelect Number PS16421956
Manufacturer Part Number 741-0493C
This authentic manufacturer-supplied part is designed for Craftsman snowblowers. Flange bushings are used to provide support for components while allowing them to rotate with minimum friction. It is made of high-quality material and is sold individually. Make sure to check the diagrams for your model to ensure the correct replacement procedure. You may need a screwdriver and a wrench set to take apart and reassemble the equipment when performing this repair.
Your Price
$45.11
In Stock
Bolens Snow Blower Shave Plate (24 In)
PartSelect Number PS9306312
Manufacturer Part Number 790-00120-0637
This is an authentic OEM sourced part which is specially manufactured for use with walk-behind snow throwers. The shave plate is used to scrape up the snow, please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this component. This high-quality shave plate is made of durable material and is sold individually. Keep in mind the hardware to secure it is sold separately.
Your Price
$36.93
In Stock
Bolens Snow Blower Shoe-slide
PartSelect Number PS9135084
Manufacturer Part Number 784-5580-0637
This Slide Shoe is rated as "Easy" to install and requires a wrench set. It is a manufacturer-approved part that comes in black and is constructed of metal. The part is used to help the snowblower slide smoothly and is attached on the side of the augur housing. If missing or broken, it should be replaced.
Bolens Snow Blower Appliance Types
Related Bolens Snow Blower Parts
- Bolens Snow Blower Bearings
- Bolens Snow Blower Belts
- Bolens Snow Blower Gears
- Bolens Snow Blower Seals and Gaskets
- Bolens Snow Blower Skid Shoes
- Bolens Snow Blower Springs and Shock Absorbers
- Bolens Snow Blower Transmissions and Clutches
- Bolens Snow Blower Wheels and Rollers
Popular Bolens Snow Blower Models
Below are the most popular Bolens Snow Blower models we have. Enter your model number in the search box to find your model.
- 824A Snowthrower
- B5210 (420020300101-420020499999) Snowthrower
- 42030 24", 8 HP Snowthrower
- 31A-32AD765 (2015) Snowblower
- 31A-040-163 (2004) Snowblower
- 31AE160-163 (2004) Snowblower
- 31A-3AAD765 (2017) Snowblower
- 31A-32AD765 (2014) Snowblower
- 31AS611D163 (2004) Snowblower
- 30138R 38 in. Snowthrower Attachment
- 31A-3AAD765 (2016) Snowblower