Make sure you haven't got the discount earlier.
Cylinder Head 796232
Fits your 74591 Lawn Tractor!
★★★★★
★★★★★
Rated by 2 customers
Really Easy
1- 2 hours
Ratings submitted by customers like you who bought this part.
Fits your 74591 Lawn Tractor!
PartSelect Number PS9140434
Manufacturer Part Number 796232
Manufactured by
Briggs and Stratton
Product Description
Cylinder Head Specifications
This is the replacement cylinder head for your small engine. This is a 15-piece kit that will allow you to rebuild the cylinder head for the engine on your outdoor power equipment. The cylinder head is important to small engine function, so if your cylinder is damaged, it is a good idea to replace it with this kit. Be sure to clean off any residue from the old cylinder head gaskets, so the new gaskets will adhere properly. These are OEM parts sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Engine, Lawn Mower, Lawn Tractor.
This part works with the following products:
Briggs and Stratton, Cub Cadet, Toro, Simplicity.
Customer Reviews
Average Rating:
1 Review
★★★★★
★★★★★
5.0
Filter By Rating:
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Star
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Edward G - July 3, 2018
Verified Purchase
Replaced head and push rods, straightforward repair.
Another "victim" of bent exhast vale pushrods. I purchased the replacement head assembly in case there was other damage on the original head. The head was received complete with valves already fitted and lapped. This was an easy replacement, no problems at all. I ordered the lower gasket set as well because I needed to check the cam and crankshaft for possioble damage. Very pleased with the packaging and contents of the kits. Engine started and runs smoothly again on both cylinders. The oil pan kit included new bolts with tighening recommendations. Very pleased with the service and quality from PartSelect.
- < Prev
- 1
- Next >
Back to Top
Customer Repair Stories
Average Repair Rating: 2.9 / 5.0, 2 reviews.
What's this?
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Engine quit due to valve guide sliding out causing rocker arm to be immovable resulting in bent push rods.
Clean engine with a Gunk type product. Remove valve cover. Loosen bolts and remove old cylinder head. One bolt is located inside valve cover area. Remove old gasket and inspect and clean that surface. Attach new head with new gasket using existing bolts. Torque to 18'#s with a cross type pattern. Attach new rocker arms and push rods. Set
... Read more
valve clearance to .004 - .006. Attach valve cover with gasket. Check oil level. Start and let it warm up. Let cool remove cover then check valve clearance again. Replace cover.
Read less
-
D from HUNTSVILLE, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Socket set
11 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the head blew a vaulve guide destoying push rods
about 6 hours to tear down and replace don't do it in the hot sun needed more breaks takes longer, but the new factory heads did it started up 185 lbs of compression almost back to new, so much more power than old one's. FYI take off the motor cover every year clean out the debris (grass-mouse nest- and oil) it blocks the air and COOKS
... Read more
THE HEAD it only takes short time and will make that motor last a little longer but it is a BRIGGS engine
Read less
Other Parts Used:
-
Robert from WHITMAN, MA
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
21 of 28 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Back to Top
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ron
April 4, 2024
Which side of engine does this cylinder head fit?
For model number 441677-0131-E1
Hi Ron, Thank you for asking. This would be the Left Side Cylinder Head. Good luck with the repair!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS9140434
Manufacturer Part Number: 796232
Manufacturer Part Number: 796232
Brand
Model Number
Description
Cub Cadet
13AD608G101
Lawn Mower
- Cub Cadet Lawn Mower Model 13AD608G101/SERIAL: 1H019H - 1H310H (13AD608G101/SERIAL:1H019H1H310H, 13AD608G101/SERIAL: 1H019H 1H310H) Parts
Cub Cadet
13AT608H101
Lawn Mower
- Cub Cadet Lawn Mower Model 13AT608H101/SERIAL: 1H019H - 1H310H (13AT608H101/SERIAL:1H019H1H310H, 13AT608H101/SERIAL: 1H019H 1H310H) Parts
Cub Cadet
13BD608G101
Lawn Mower
- Cub Cadet Lawn Mower Model 13BD608G101/SERIAL: 1H019H - 1H310H (13BD608G101/SERIAL:1H019H1H310H, 13BD608G101/SERIAL: 1H019H 1H310H) Parts
Cub Cadet
14AJ808H101
Lawn Mower
- Cub Cadet Lawn Mower Model 14AJ808H101/SERIAL: 1H019H - 1H310H (14AJ808H101/SERIAL:1H019H1H310H, 14AJ808H101/SERIAL: 1H019H 1H310H) Parts
Back to Top
Cylinder Head
$
187.88
On Order
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.