Ask our experts a question about this part and we'll get back to you as soon as possible!
21 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Franceo
October 21, 2021
What is the purpose of the mode shifter
For model number GTW330ASK2WW
Hello Franceo, Thank you for the question. The Mode Shifter, controls the agitation program, and allows the washer to go through the fill, agitate, rinse and spin cycles. We hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Jeff
March 17, 2022
How do I test the mode shifter. The washer made a plastic grinding noise while getting started on bulky items with washer set to deep fill. There were 6 XL towels that were pretty heavy. It made the noise after filling. I then set to DRAIN/SPIN , it pumped the water but didn't spin. The motor turns free and the clutch seems engage when turned by hand. the drum turns when the clutch is engaged.
Thanks
For model number GTW750CSL1WS
Hello Jeff, thank you for your question. You can check the mode shifter by removing the front panel of the top loader -- by depressing two clips between the top and front. If you see the inner tub moving during the wash cycle, the shifter coil could be faulty, which you can check with an ohmmeter and decide whether to replace the coil or the motor. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Jacob
April 28, 2022
How does the mode shifter connect on the clutch
For model number GTW220ACK5WW
Hello Jacob, thank you for your question. The Clutch PS11729473 is a round white plastic cog, and it is connected to the MODE SHIFTER PS16554752 by the two white plastic pegs from from shifter. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
My top load GE washer will spin but NOT agitate. I replaced the mode shifter, the auger and lower base part to auger. I also replace the belt at the bottom of washer.
For model number GTW460ASJ6WW
For model number GTW460ASJ6WW
Hi John, thank you for reaching out. Based on the description that you have provided, we would recommend replacing the washer clutch, part number PS11729473, to fix this issue. We hope this solves your issue!
Machine made grinding noise. The bottom belt feels gooey and looks to have oil on it. I think I may need a clutch and belt but how did the belt get oily?
For model number GTW465ASN1WW
Hi George, thank you for reaching out. According to our research, there is grease on the clutch to reduce the washer friction while moving. The grease can leak and make the belt gooey and cause the washer to make a grinding noise. We recommend replacing the clutch, part number PS11729473, to fix this issue. We hope this solves your problem!
Would not wash or spin replaced drive belt washed one load now will not fill wash or spin
For model number Gtw330ask4ww
Hi Larry, thank you for your query. To fix this issue, we would recommend checking the following parts: lid switch assembly, part number PS16554755, water inlet valve assembly, part number PS12726768, selector switch, part number PS16217193, and mode shifter, part number PS16554752. We have attached a relevant link to help you check these parts. If still the problem exists, then you may need to replace the control board, part number PS16743401. We hope this solves your problem!
Washer will not fill- just a few sporadic spurts and stops then just clicks. Putting it into service mode: the washer WILL fill properly during pressure sensor test. Recirculate pump test results just in clicking. Drain pump test works properly. Spin, Recirculate and Agitate tests all fail, machine just clicks and clicks. Stops for a while then clicks again. Is this a Mode Shifter issue?
For model number HTW240ASK6WS
Hi John, thank you for getting in touch. We have concluded that the issue is with the mode shifter, part number PS16554752. You may need to check this part for any damage. If it is faulty, you may need to replace it. Let us know if you have further questions!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kimberly
October 25, 2023
At the end of the wash cycle the clothes are still soaking wet.
For model number GTW460ASJ6WW
Hello Kimberly, thank you for your inquiry. The most likely cause for a washer to return soaking wet clothes is a drain hose problem. Check and clean the drain hose, it may be kinked or blocked. Make sure you are not overloading the washer. Also, make sure the dryer is spinning fast enough to wring out the clothes properly. If this is not the issue, we would recommend checking the drain pump, part number PS12723115. We hope this information is useful!
Washer will stop after agitation cycle,drain then will not spin. Have cut power and reset the electronics this works for one or two loads then starts doing the same think again.
For model number GTW460ASJ9WW
Hello James, thank you for your question. We have researched the model you have provided, and we would suggest the UI & CONTROL BOARD TL27 LE, part number PS16542666. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
My top load GE washer will spin but not agitate. I replaced the auger and lower base part to auger. I also replace the belt at the bottom of washer.
For model number GTW460ASJ6WW
Hello John, thank you for reaching out. A washing machine mode shifter is the component that causes the transmission to change between agitation and spinning modes. If the mode shifter is defective, the transmission may be stuck in the spin mode, resulting in the washer not agitating. We recommend you replace the mode shifter, part number PS16554752, to fix the issue. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
