Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Peter B - February 22, 2024
Verified Purchase
Easy Repair great fit
The part arrived on time and within minutes the repair was completed.
★★★★★
★★★★★
Jodi V - October 11, 2022
Verified Purchase
Easy repair
Correct part and easy install due to the fact that my auger broke off its base. I did not need to remove the old one. I just put the new auger into place and now my washer is back in working condition.
★★★★★
★★★★★
Eardley P - February 20, 2022
Verified Purchase
worked as expected. no issues
Fast delivery in good condition.
★★★★★
★★★★★
Jamie C - January 17, 2022
Verified Purchase
Worked beautifully
Easy to install. Much easier than stated! Works like a champ
★★★★★
★★★★★
John S - September 26, 2021
Verified Purchase
Part works great!
Timely delivery of part , perfect fit, the only thing there could have been a brief installation instructional included.
Thks
John
★★★★★
★★★★★
Ryan J - July 1, 2021
Verified Purchase
Great!!
Great service. Part was correct, worked without any issues. Shipping was fast.
★★★★★
★★★★★
Nicholas T - May 2, 2021
Verified Purchase
Good Part Just a Bad Design
The part was packaged well and arrived quickly. In addition to the auger I also purchased the base piece it connects to since my old one was cracked. I had tried to get the auger off with a strap wrench, but it wouldn’t budge. Also tried using the screwdriver method to break the auger loose. But this is a terrible design. The auger has keys that, once locked together with the base, will not separate. After seeing how this thing is made, I can’t imagine how the auger would ever be able to be separated from the base by turning it clockwise. The keys on the auger click past solidly square stops and resist all attempts to release. I ended up using an oscillating tool to cut through the old auger. This exposed the bolt that holds the base. Once the base and old auger was out, it was a very simple process to install the new base (or the old base if in good condition after separating it from the now cut-in-half auger) and twisting on the new auger. I doubt I could get these new ones to separate if I tried, so don’t put the auger and base together until you want them permanently attached.
★★★★★
★★★★★
Sheryl D - April 24, 2021
Verified Purchase
Perfect
This company has the parts I needed at a reasonable price and quick delivery. Excellent
★★★★★
★★★★★
Pauline S - December 12, 2018
Verified Purchase
easy fix just put it on and twist
No problems with part
★★★★★
★★★★★
Amy S - November 8, 2018
Verified Purchase
Easy repair, worked as expected
Appliance back in working order
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Top of auger was broken
Instructions were fairly good, line up holes and push a phillips head screwdriver thru auger then twist it off. Problem is you can only use a short screwdriver due to space limitations, and it is or at least for me was impossible to twist the auger off as directed, but after I lost my temper and gave the screwdriver a good thump (auger wa
... Read mores already broke, what's the harm) with my left hand the auger came right off, putting the new one on is very simple.
Upper portion of auger spins on bottom portion so they need to be locked together with a screwdriver to twist off counter clockwise. Good instructions here: https://m.youtube.com/watch?v=Qr4GzTJBho0&vl=en. Someone needs to hold the tub while another uses the strap wrench to turn the auger counter clockwise. Should pop off with a bit of f
... Read moreorce. New one pops on easy.
Read less
Cody from BALDWIN CITY, KS
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator broken
Replaced the agitator. Very difficult to remove..Have to apply force and pull. Theres no bolt inside if the fabric softener part that needed to be adjusted...
lisha from PHENIX CITY, AL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
13 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
JAMES
August 21, 2023
The Auger on my GE washing machine broke and I wasn't sure if this (PartSelect Number PS16226232) is the correct part for it. I've attached the model number for my washing machine (GTW465ASN3WW). Please advise, thanks in advance.
For model number GTW465ASN3WW
Hi James, thank you for your inquiry. Based on our research, the part you are referring to is compatible with your model. We hope this information is useful!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Edward
October 12, 2023
How to remove the agitated
For model number GTW485ASJ5WS
Hello Edward, thank you for contacting us. You may need to follow these instructions for the removal of the agitator:
1. Remove the fabric softener dispenser.
2. Align the raised bump with the opening on the auger.
3. Use the screwdriver to puncture through the inner shaft of the auger and twist it clockwise until the auger releases.
4. Unscrew the bolt on the base of the agitator and lift it up.
5. Install the agitator back by reversing the same procedure.
We hope this helps!
Was this helpful?
Thank you for voting!
Wendy
October 30, 2023
Do you have to replace the base if you are replacing the auger?
For model number GTW460ASJ5WW
Hello Wendy, thank you for reaching out. According to our research, the auger and base comes separately. If the auger, part number PS16226232, is damaged, then you may need to replace it only. We hope this information helps!
Was this helpful?
Thank you for voting!
Geoffrey
February 8, 2023
WHICH AUGOR FITS THIS MODEL AND WHICH AUGOR CAP
For model number GTW685BSL1WS
Hello Geoffrey, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part #: PS16226232 for the Center part of the Auger and Part #: PS16743416 for the Base. The Cap is Part #: PS12073992. We hope this helps, good luck with the repair!
