Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jennifer S - February 22, 2018
Verified Purchase
Great parts
The parts came quickly worked perfectly no problems
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Lower agitator, very loose and wobbly
Reached down into the washer bowl. Fingers on each side of the agitator base. Quick jolt up agitator popped out adjustable wrench took the bolt. Off of the agitator coupling removed coupling wire, brushed the gear slots installed a new coupling with both new bolt lined up, agitator slots pump, the new agitator on after lined up with a dow
... Read moren force quick jolt, then installed the new fabric softener, part on top of agitator
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kristi
May 28, 2019
Is there a fabric softener dispenser available for this model? The diagram shows one but the part number comes up as an agitator cap
For model number GTW220ACK4WW
Hello Kristi, Thank you for the question. Very sorry but checking this model, it only has a cap and no dispenser. Thank you for your inquiry, good luck with this repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Steve
April 23, 2019
How does the agitator cap remedy the fact that the washer will not agitate? Its just a cap.
For model number HTW200ASK1WW
Hi Steve,
Thank you for your question. If the cap is damaged or defective and it is not fitting correctly on the agitator, it may cause the agitator not to work correctly. There are some other parts that you will need to check to see which one is causing the issue. You will need to check the door lock, the agitator, the drive belt, the motor, the transmission and the electronic control board. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Dionne
March 9, 2023
IS IS GLUED ON AND JUST PLACE IT UNDER THE AGITATOR BELL OR CUP!
For model number GCWP180D1CC
Hi Dionne, thank you for your inquiry. According to our research, the compatible agitator cap/fabric dispenser cap for your model is part number PS272900, and it snap-fits to the top of the agitator without any screw or glue. We hope this is what you were looking for!