Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ray P - October 17, 2018
Verified Purchase
exact match. easy and fast
fast shipping. we have 3kids so having the washer down was not ideal. showed up within 2 days. was easy to install. the part is fine, parts select is the best.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The machine stopped working in a normal ay. The little screen told us we had a lid lock problem. So we fixed it.
We disconnected the rear of the dashboard and folded it toward. We unsnapped the top cover and exposed the lid lock. We removed the old lid lock and replaced it with the new parts from SelectPart. Put it all back together.
Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Troy
December 20, 2018
My washer properly runs a full cycle except it won't spin during the spin cycle. It does spin at the beginning of the cycle when sensing the load so mechanically i believe it is functioning properly. I read it could be the lock mechanism. Should i replace the lid lock quick release wh01x27954 as well as the lid lock striker wh02x24106 and the lid lock harness wh19x24141 ? Does this sound like the solution to my problem? Thank you!
For model number GTW680BSJ4WS
Hello Troy, thank you for your question. It definitely sounds like a lid lock issue. I would recommend replacing the lock first, as that is the most common cause of the unit not going into spin mode. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ken
January 23, 2019
Washer will not spin. Drains ok but will not go into spin cycle. Have replaced lid lock switch , machine still stops at 13 minutes, drains but will not go into spin cycle ? Help
For model number GTW680BSJ0WS
Hello Ken, Thank you for the question. This sounds like an issue with the timer switch that controls the cycles. The timer is built into the control board, Part Number: PS12582961. Thank you for your inquiry, good luck with this repair!
Mid cycle the washer started saying lid and wont finish. I dont hear it locking when it starts either
For model number GTW680BSJ4WS
Hello Angel, Thank you for the question. I suggest checking or replacing the Door Lock, PartSelect Number PS12343280. The lid lock keeps your washer lid closed during the washing cycle. If this part is broken, your washer may not run because it thinks the door is open, or it will not keep the door locked during the wash cycle.Thank you for your inquiry, good luck with this repair!
The machine won’t start. The lid lock will attempt to lock and keeps clicking and the machine won’t start or do anything.
For model number Gtw485asj2ws
Hello Alyssa, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12343280. Hope this helps!
Washer fills and cycles through wash, will not drain or spin, pump or lid switch?
For model number GTW330ASK1WW
Hi Randy,
Thank you for your question. If your washer is not draining, you will need to check the door lock, the drive belt and the lid lock striker. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Billy
February 23, 2023
I replaced lid lock and it still doesn't lock all it does is spray water a few times then says end
For model number GTW685BSL1WS
Hi Billy, thank you for your question. You may need to replace the lid lock harness, part number PS11759139, and the lid lock sticker, part number PS11766684. We hope this sorts out your problem!
Lid lock light on not allowing machine to start, contact looks ok, would the lid lock harness fix this or?
For model number HTW200ASK0WW
Hello Jason, thank you for your question. If the lid is not locking the appliance cannot complete the cycle. You would want to replace the door lock WH01X26114 and the door lock harness part number WH19X24141. I hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
