General Electric Refrigerator Trays and Shelves
Find your partEnter your model number or a part number and click "Search"
Here is an example model number plate:
Popular General Electric Refrigerator Trays and Shelves
Crisper Support - Rear
PartSelect Number PS2358879
Manufacturer Part Number 241993001This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to the inside cabinet wall. If there is visible damager or your crisper stops fitting properly, it may be time to replace the part. Check your user manual and model number to ensure this part is what you need. Replacing the rear crisper support in your refrigerator is an easy job. This part is made from plastic and mounts on the inside of the wall. To complete this repair you will need a small putty knife, a punch or a short flat blade screwdriver, and a small hammer. You may need to replace your rear crisper support if you find that the door will not open or close. In order to complete this repair, you will need to remove all the shelves above the crisper in order to have ample room to work. It is also good to have duct tape on hand, which can be used to protect the liner around the support. This part is sold individually. Please note that the rear and front crisper support are different parts; this is the one you are looking for if it is your rear support that needs replacing.
Peter from Amherst, NY
Support studs were brokenUsed pliers to remove the residual broken stud that was still attached to the wall of the refrigerator, and then just pushed the new part in place. The longest time was spent in removing the food and crisper drawers. Read more...
Module Shelf Insert - Clear
PartSelect Number PS2323438
Manufacturer Part Number WR71X10761The Module Shelf Insert is a complete assembly for the module shelf. This repair is rated as "Easy" by users. Simply remove the old shelf insert and snap the new one into place using the locking tabs. This part is used to hold items in the fridge, and if broken it should be replaced. Refer to your user manual and model number to ensure this part is right for you.
Morgan from Acworth, GA
The clear plastic module shelf insert broke because I dropped it.I popped out the old one and popped in the new one. Read more...
Door Fixed Shelf
PartSelect Number PS964507
Manufacturer Part Number WR17X11889This door shelf is a replacement part for your refrigerator. It is very easy to install and requires no tools. Simply pull out the existing shelf bar and snap the new one into place, making sure the locking tabs are secure.
allan from brighton, MI
broke shelfeasy fix... good price fast shipping, thanks Read more...
Module Shelf Insert
PartSelect Number PS2323441
Manufacturer Part Number WR71X10764This shelf insert is a genuine OEM replacement part for your refrigerator. The shelf insert can be installed without any tools. Simply pull out the existing shelf and insert the new one.
Luci from Richvale, CA
We Needed more food storage space.We noticed that there was door area that could be used - so I went hunting for more shlves - Thank Yo for having them in stock....This is used for a Care Home for Multi-Handicapped ladies and their staff....Much appreciated! Read more...
Crisper Drawer Cover
PartSelect Number PS890565
Manufacturer Part Number WR32X10398The crisper drawer cover sits on top of your vegetable crispers and helps to maintain proper crisper temperatures. It also doubles as a sturdy lower shelf for extra storage in your refrigerator. If the drawer cover is damaged or cracked, it will not be able to do either of its jobs, and should be replaced. This replacement cover features shallow, wide grooves to prevent leaks and to catch spills. It also has rail brackets underneath to hold the drawer, allowing the drawer to slide in and out. It is made with some added structural rigidity that makes it stronger and more durable than the original. This model measures 24 1/2 inches long x 19 inches wide x 2 5/8 inches deep.
Kim from Bronx, NY
Vegetable pan cover broke down the middleWhen the cover came to my apartment, I crossed my fingers that the piece would fit . Well, within 5 minutes the old cover was out and the new cover in. And it looks better than new! Finally, I don't have to hold my vegetable drawers up with a D battery! Read more...
Door Fixed Shelf - White
PartSelect Number PS1015918
Manufacturer Part Number WR17X11890This part is the door fixed shelf, also known as the door shelf bar, and it is built for your refrigerator. It allows food and beverages items to stay in the freezer door shelf. It is made of white plastic. If your current door shelf bar is broken or missing, you will need to replace it. Many of our customers have rated this repair as easy. Simply lift out the old bar, and replace it with a new one. Be sure you can properly close your freezer door after the repair is complete.
Chris from E NORTHPORT, NY
Broken freezer door shelfJust snapped in. Read more...
Middle Pan Cover Frame - NO Glass
PartSelect Number PS11766703
Manufacturer Part Number WR32X26246This is the frame only. Glass is NOT included and must order separately.
Sam from SAN ANTONIO, TX
Broken Drawer FrameSimply removing parts from the old frame and installing them on the new frame and putting everything back in the refrigerator to include the glass. Read more...
Vegetable Drawer Shelf Frame
PartSelect Number PS964313
Manufacturer Part Number WR17X11662Frame only. Glass NOT included.
paul from allison park, PA
The cover cracked and was unable to hpld the crisper drawersRemoved the crisper drawers, then the glass top shelf insert, then cleaned the area before sliding in the new cover and then replacing the crisper drawers and the glass top insert. Read more...
Door Shelf Retainer Bar End Cap - Left or Right Side
PartSelect Number PS298977
Manufacturer Part Number WR2X8345This end cap is sold individually. It can be used for the right or left side of either the freezer or refrigerator door shelves.
Angela from Minneapolis, MN
Door Retainer Bar and End Caps were missingPlaced bar into end caps and slide end caps into slots in the door. Took about 1 minute! Very easy! Read more...