EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...

General Electric Refrigerator Fans and Blowers

Popular General Electric Refrigerator Fans and Blowers

Your Price
$27.76
  In Stock
General Electric Refrigerator Evaporator Fan Blade
★★★★★
★★★★★
5 Reviews
PartSelect Number PS11738973
Manufacturer Part Number WP2169142
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate the cold air into the refrigerator and freezer sections. The fan blade is white in color and made from plastic. This is a genuine OEM part. Please be sure to disconnect the power to your refrigerator before starting your repair.
Fixes these symptoms
  • Clicking sound
  • Freezer section too warm
  • Fridge and Freezer are too warm
  • See more...
Installation Instructions
CYNTHIA from ALPHARETTA, GA
Noisy Evaporator Motor/Fan
Our 48" Built-In KitchenAid Frig (1999 model)started getting very noisy about 3 years ago. Two different repairmen plus KitchenAid said 'that was the way it was'. I figured out the noise was coming from the evaporator motor/fan but the repairmen said it was just because moisture was freezing on it and replacing the evaporator motor/fan probably would not make a difference plus it would be very expensive. When I discovered PartSelect and that I could order the parts (about $80) myself I thought why not. It was simple to replace. Removed cover inside freezer compartment - detached bracket and electrical wires - replaced with new motor and fan. Now you can hardly hear the frig running and it runs half the time - more efficient. I can't believe we lived with that noise for so long. Thanks to PartSelect I proved KitchenAid and the repaiirmen wrong and did it myself! Thank you PartSelect! Read more...
Your Price
$18.95
  Special Order
General Electric Refrigerator Condenser Fans Blade Assembly
★★★★★
★★★★★
2 Reviews
PartSelect Number PS1022410
Manufacturer Part Number WR60X10207
The condenser fan blade assembly helps to regulate the temperature in your refrigerator or freezer. This fan assembly has 4 blades, but other fans may have 3 blades, so be sure to check the number of blades on your fan. The fan blade is made of white plastic and is approximately 6 inches in diameter. If your freezer section is too warm, or you notice a strange noise coming from your refrigerator when it is running, you may need to replace the condenser fan blade assembly. This part is sold individually.
Fixes these symptoms
  • Clicking sound
  • Freezer section too warm
  • Fridge too warm
  • See more...
Installation Instructions
Jeffrey from Tampa, FL
My refrigerator began to overheat and the everything was thawing!!
My refrigerator began to overheat and the everything was thawing!! The condenser fan motor had seized and I thought this is something even I can replace.

I did a Google search on the refrigerator model number. The link to your site looked promising and I clicked on it. I was taken to your web page for my refrigerator and I clicked on the schematic for the condenser assembly.

The schematic had the parts I needed labeled clearly so this layman could be sure to get the right ones.

I ordered the parts at 12:45PM Monday and selected overnight shipping. The parts arrived at 8:35AM Tuesday (Thank you FedEx). I installed the parts and my refrigerator is up and running again.

To get to the condenser fan motor I took off the back panel on the fridge that covers the condenser, fan and coil. The fan/motor assembly is attached to a bracket I removed with two screws. Pulled the bracket assembly out of the back of the fridge, removed the fan blade and then the motor, and put the new motor on the bracket and stuck the new fan blade on the motor spindle. The trickiest part was getting the complete assembly back in. Just went slowly and took my time. Reconnected the wires, no problems. I took pictures of everything that I disassembled BEFORE I disassembled it in case I wasn't sure how something went back in but this job was so simple I didn't need the pictures.

I’m not sure how I could improve on this except maybe you could ship a refrigerator technician, too, to do the install.

Thank you PartSelect everything worked out better than I could have hoped and I saved $220.00 compared to what a repair service was quoting.
Read more...
Your Price
$17.92
  In Stock
General Electric Refrigerator Condenser Fan Blade
★★★★★
★★★★★
6 Reviews
PartSelect Number PS16762845
Manufacturer Part Number WR60X42350
Introduce your appliance to the power-packed performance of the GE condenser fan blade. Specifically designed for superior functionality and longevity, this blade is your reliable choice for optimal cooling efficiency. Expertly crafted by GE, this condenser fan blade maximizes airflow while maintaining a quiet operation, making it an ideal component for your household appliances. Trust the world-class quality of GE for ensuring smooth and trouble-free operations. Elevate the performance of your appliances with this potent GE condenser fan blade.
Fixes these symptoms
Installation Instructions
Lawrence from SUFFERN, NY
Fan blade brittle, cracked and noisy.
Pull the refrigerator away from the Wall and unplug the power cord. Remove the lower back panel (7 screws) remove 2 screws holding fan and motor assemble in place and unplug the electric to the fan. The fan assembly will pull out completely. Hold the metal stem that the fan blade is on with pliers to prevent from moving or damaging the motor and slowly and carefully pull off the old blade. Push on the new blade till its snug. Vacuum any debri at the base of the refrigerator. Put back the fan assemble with the 2 screws and the back panel and your done. Result was a quiet refrigerator. Read more...
Your Price
$76.57
  In Stock
General Electric Refrigerator Evaporator Fan Blade
★★★★★
★★★★★
9 Reviews
PartSelect Number PS12730613
Manufacturer Part Number WR60X30922
This evaporator fan blade is for your refrigerator, and it circulates air so that the temperature of the fridge is regulated. This model has 3 blades, and is a little more than 4 inches in diameter. It is made of white plastic and is sold individually. If your refrigerator is noisy and you hear a clicking sound, it is a good indication that the evaporator fan blade is warped or damaged. If the fridge or freezer sections become too warm, the fan could be to blame as well.
Fixes these symptoms
  • Clicking sound
  • Freezer section too warm
  • Fridge and Freezer are too warm
  • See more...
Installation Instructions
James from Gainesville, VA
Fan motor making noise due to broken fan blade
1) Unplugged fridge and removed cover over light in freezer.
2)Removed screws holding cover over motor.
3) Removed screws on bracket holding motor in place.
4) Un plugged motor and used razor blade to cut grommet holding wires in place.
5) Plugged in new motor and routed wires through grommet. Then used zip ties to hold grommet together.
5) Re-attached motor bracket and installed new fan.
6) Reinstalled cover over motor.
Read more...
Your Price
$131.09
  In Stock
General Electric Refrigerator Condenser Fan And Housing
PartSelect Number PS12743997
Manufacturer Part Number WR17X31476
This condenser fan and housing assembly helps regulate refrigerator temperature by drawing air over the condenser coils to release heat. The assembly includes the fan blade, motor, and housing, ensuring efficient airflow for improved cooling performance and energy efficiency. Replacing a worn or noisy fan resolves issues such as poor cooling, excessive heat, or unusual sounds from the back of the appliance. Built to OEM standards for reliability and a precise fit, this component is essential for maintaining optimal refrigerator function and extending compressor life.
Fixes these symptoms
Your Price
$42.37
  In Stock
General Electric Refrigerator Blade Conf Fan Assembly
★★★★★
★★★★★
2 Reviews
PartSelect Number PS11726966
Manufacturer Part Number WR60X24484
Introduce your refrigerator to a seamless cooling experience with this GE Condenser Fan Blade. Designed exclusively to fit into specific models of GE refrigerators, this fan assembly ensures your appliance runs at peak efficiency. It expertly moves air across the condenser coil to adequately cool the hot refrigerant before it enters the evaporator. To maintain the freshness of your perishables, it is advised to safely store any food that might deteriorate during the installation process. Remember to unplug the refrigerator before commencing with the installation of this essential component. Keep your refrigerator at its optimal cooling state with this top-tier GE Condenser Fan Blade.
Fixes these symptoms
Installation Instructions
Edward from SILVER SPRING, MD
Noise coming from rear of fridge
Remove rear plate. Remove fan bracket. Replace fan gaskets, blade and motor. Replace bracket. Replace rear plate. Very simple. Fixed the problem. Read more...
Your Price
$26.73
  In Stock
General Electric Refrigerator Blade Fan Evap Assembly
PartSelect Number PS11737115
Manufacturer Part Number WR60X25785
Your Price
$158.45
  In Stock
General Electric Refrigerator Icemaker Fan W/ Gasket
★★★★★
★★★★★
1 Review
PartSelect Number PS17645342
Manufacturer Part Number WR60X45065
Upgrade your appliance with the Icemaker Fan with Gasket from the trusted brand, GE. This premium quality part has been expertly designed to enhance functionality and assure durable, reliable operation. Installing this part optimizes cooling performance while ensuring your icemaker remains in excellent condition. With its perfect fit and easy installation, it offers an efficient and unproblematic solution for your icemaker's maintenance needs. Invest in this part to experience superior performance and longer service life from your GE appliances.
Your Price
$28.06
  In Stock
General Electric Refrigerator Evaporator Fan Blade
PartSelect Number PS1020949
Manufacturer Part Number WR60X10205
We know how frustrating it can be when the shelves in your Samsung refrigerator aren't working as they should. Cluttered or broken shelves can make it hard to find what you need and can keep your fridge from being as efficient as it could be. That?s why we want to introduce you to the Samsung Quick Space Shelf Assembly. This is a genuine, high-quality replacement part designed to fit certain models of Samsung refrigerators. The Quick Space Shelf mounts right in the center of your fridge, making it easy for you to grab the items you need right when you need them. Whether you're looking for last night's leftovers or you need a cold drink, this shelf puts your items at your fingertips. Plus, it can help you maintain a neat, organized refrigerator. The assembly might include a few different pieces?so it's always a good idea to check your parts diagram to see all the components you'll receive. And don't worry; we're all about safety first. When you're installing your new shelf, be sure to wear work gloves to protect your hands. And of always, follow the instructions in your owner's manual to assure you install the shelf properly. This Samsung Quick Space Shelf Assembly can help restore your fridge back to its prime condition. Keeping your fridge tidy and efficiently running. So make the smart move - get this part and get your fridge back to operating just as excellently as it did when it was new!
Fixes these symptoms
Installation Instructions
Israel from Concord, NC
freezer and ice maker worked fine but bottom(cooler)did not cool innoff .Freezer compartment was also forming a lot of ice all over. l
Removed covers on the freezer compartment to gain access to the evaporator fan motor.The motor was turning but not fast innoff to move air true tthe evaporator coil.The evaporator fan it is the one that will cool the bottom and top of your refrigerator. Read more...
Your Price
$34.12
  In Stock
General Electric Refrigerator Evaporator Fan Blade Kit
★★★★★
★★★★★
6 Reviews
PartSelect Number PS304684
Manufacturer Part Number WR60X114
This kit features a 5-blade plastic evaporator fan blade that rotates CCW and measures 4.5-inches in diameter and has a 3/8-inch-tall shaft. This kit also has a metal compression ring that secures the fan to the evaporator. The evaporator mechanism is normally located in the freezer and is responsible for pulling the warmer air over the condenser coils, cooling it off and then blowing and circulating that cooler air through the rest of the refrigerator. If the freezer compartment has a frost buildup or if there is a lack of cooling and airflow in your refrigerator, this fan likely needs to be replaced. To replace your evaporator fan, you will likely need a screwdriver and a set of pliers and check your user manual for the exact location of your evaporator fan.
Fixes these symptoms
Installation Instructions
Keith from Fort Worth, TX
Noisey fan/motor (bad motor bearing ?)
Removed 2 phillips head screws to remove ice maker (could have just loosened them)
Pulled fan off of shaft
Removed 2 phillips head screws on motor bracket , disconnected three motor wires & removed motor.
reversed process to install new motor & fan blade.
Space was a little tight for two hand and arms, but do-able.
Read more...

Related General Electric Refrigerator Parts