General Electric Refrigerator Wheels and Rollers
Find your part
Enter your model number or a part number and click "Search"
Popular General Electric Refrigerator Wheels and Rollers
Your Price
$9.52
In Stock
Single Roller
Locate and remove the wheel leveling screw from the front bottom corner.
Remove cotter pin from the pin that mounts the wheel assembly to the refrigerator. Tap out the mounting pin.
Lift out the wheel assembly.
Remove the Roller pin from the wheel assembly. I used a Dremel tool with a cutting disk. A hack saw will also probably work.
Install the new roller pin and wheel into the wheel assembly. Use a hammer or vice to peen over the end of the roller pin.
Reinstall and adjust wheel assembly. Read more...
PartSelect Number PS11738235
Manufacturer Part Number WP10450603
This wheel is sold individually. It is located on the bottom of the refrigerator.
Installation Instructions
mike from holly springs, NC
Left front plastic wheel was broken
Pop loose the plastic grate at the bottom.Locate and remove the wheel leveling screw from the front bottom corner.
Remove cotter pin from the pin that mounts the wheel assembly to the refrigerator. Tap out the mounting pin.
Lift out the wheel assembly.
Remove the Roller pin from the wheel assembly. I used a Dremel tool with a cutting disk. A hack saw will also probably work.
Install the new roller pin and wheel into the wheel assembly. Use a hammer or vice to peen over the end of the roller pin.
Reinstall and adjust wheel assembly. Read more...
Your Price
$8.79
In Stock
WHEEL PAN COVER
PartSelect Number PS283653
Manufacturer Part Number WR01X10209
Installation Instructions
Thomas from Kissimmee, FL
Your Price
$57.15
In Stock
MOBILITY FRONT Assembly
The front refrigerator panel was removed to reveal the refrigerator base and provide access to the front wheel assembly adjustment screw (screw mobility). The front of the refrigerator was propped up on a solid support about 6 inches above the floor to provide access to the front wheel assembly and allow removal through the base of the refrigerator. The front wheel assembly was dislodged from the base by first removing the pivot pin by hand and then prying the wheel assembly loose with a screwdriver. Normally the pivot pin would need to be released by prying it loose with a screwdriver and then pulling to free by hand. Once the front wheel assembly was dislodged the adjustment screw was removed with a socket set and the front wheel assembly fell out of the refrigerator base. The new front wheel assembly was then inserted into the refrigerator base, the new pivot pin was inserted and aligned with the support holes and pressed into place to secure with locking mechanism. The new adjustment screw was then inserted into the refrigerator base hole, aligned with the front wheel assembly and hand tightened to set the first threads. The adjustment screw was then tightened with a socket set to seat the adjustment screw. The refrigerator was then lowered and the adjustment screw was adjusted to level the refrigerator. The refrigerator was then pushed back into its normal position and a final adjustment performed to assure the refrigerator was level. The front refrigerator panel was then pressed back into place. Read more...
PartSelect Number PS1766092
Manufacturer Part Number WR02X12454
Installation Instructions
Chris from LOS ANGELES, CA
The front wheel pivot pin walked out causing the front wheel assembly (mobility front assembly) to collapse into the refrigerator base
A second person is necessary to help prop up the refrigerator. One person will need to insert a 6 inch support under the front of the refrigerator base while another person rocks the refrigerator back to provide access for the support to be inserted.The front refrigerator panel was removed to reveal the refrigerator base and provide access to the front wheel assembly adjustment screw (screw mobility). The front of the refrigerator was propped up on a solid support about 6 inches above the floor to provide access to the front wheel assembly and allow removal through the base of the refrigerator. The front wheel assembly was dislodged from the base by first removing the pivot pin by hand and then prying the wheel assembly loose with a screwdriver. Normally the pivot pin would need to be released by prying it loose with a screwdriver and then pulling to free by hand. Once the front wheel assembly was dislodged the adjustment screw was removed with a socket set and the front wheel assembly fell out of the refrigerator base. The new front wheel assembly was then inserted into the refrigerator base, the new pivot pin was inserted and aligned with the support holes and pressed into place to secure with locking mechanism. The new adjustment screw was then inserted into the refrigerator base hole, aligned with the front wheel assembly and hand tightened to set the first threads. The adjustment screw was then tightened with a socket set to seat the adjustment screw. The refrigerator was then lowered and the adjustment screw was adjusted to level the refrigerator. The refrigerator was then pushed back into its normal position and a final adjustment performed to assure the refrigerator was level. The front refrigerator panel was then pressed back into place. Read more...
Your Price
$31.62
On Order
Your Price
$24.03
In Stock
Your Price
$13.62
Special Order
Your Price
$6.71
In Stock
ROLLER Assembly
PartSelect Number PS8757904
Manufacturer Part Number WR02X13658
Installation Instructions
Arthur from NORTH PORT, FL
The roller bearings on the Salad/ vegetable storage bins broke and the bins would not slide easily.
Replaced both Crisper Drawers with new units which had the roller bearings attached. Very poor factory design of the roller bearings attachment which have not been improved in the replacement drawers. I expect this problem to repeat a few years down the road.
Read more...
Your Price
$9.52
In Stock
Your Price
$19.21
Special Order
AXLE WHEEL
PartSelect Number PS1483080
Manufacturer Part Number WR01X10604
Installation Instructions
jonathan from Bessemer City, NC
Wheels worn out.
Can’t repair it yet. Because it’s taking you too long to send me my parts. Tried calling but your answering service conveniently won’t answer. Had to cancel first order and reorder hopefully to receive faster.
Read more...
Your Price
$6.71
Special Order
Related Parts
- All General Electric Refrigerator parts
- General Electric Refrigerator Brackets and Flanges
- General Electric Refrigerator Caps and Lids
- General Electric Refrigerator Circuit Boards and Touch Pads
- General Electric Refrigerator Compressors
- General Electric Refrigerator Dispensers
- General Electric Refrigerator Door Shelves
- General Electric Refrigerator Doors
- General Electric Refrigerator Drawers and Glides
- General Electric Refrigerator Drip Bowls
- General Electric Refrigerator Ducts and Vents
- General Electric Refrigerator Elements and Burners
- General Electric Refrigerator Fans and Blowers
- General Electric Refrigerator Filters
- General Electric Refrigerator Grates
- General Electric Refrigerator Grilles and Kickplates
- General Electric Refrigerator Handles
- General Electric Refrigerator Hardware
- General Electric Refrigerator Hinges
- General Electric Refrigerator Hoses and Tubes
- General Electric Refrigerator Ice Makers
- General Electric Refrigerator Knobs
- General Electric Refrigerator Lights and Bulbs
- General Electric Refrigerator Motors
- General Electric Refrigerator Panels
- General Electric Refrigerator Power Cords
- General Electric Refrigerator Seals and Gaskets
- General Electric Refrigerator Springs and Shock Absorbers
- General Electric Refrigerator Switches
- General Electric Refrigerator Thermostats
- General Electric Refrigerator Trays and Shelves
- General Electric Refrigerator Trims
- General Electric Refrigerator Valves
