Kenmore Range Circuit Boards and Touch Pads

Videos!

Your Price

$112.75

Kenmore Range Electronic Clock Assembly

★★★★★

26 Reviews

PartSelect Number PS12728848

Manufacturer Part Number 5304518660

This is the electronic clock timer mechanism only. The overlay or touch pad is NOT included. To get the overlay, please use the model# of your appliance to search.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Little to no heat when broiling
See more...

Installation Instructions

earl from seattle, WA

Oven elements would not heat

Initially, I tested the temperature sensor and it was OK. I pulled out the range and shut off the circuit breaker to it. I removed the upper back sheet metal panel to expose the clock timer. I removed the 4 screws to it, unplugged the wires to it and plugged them into the new clock timer. I carefully removed the plastic facing stuck to the face of the old clock timer and stuck it on the new clock timer. No new adhesive was necessary. I placed the newly connected clock timer in position and secured it with the 4 screws that secured the old clock timer. I pushed the range back into position and reset the circuit breaker. I turned the oven on and the problem was resolved. Read more...

Your Price

$103.35

Kenmore Range Control

★★★★★

17 Reviews

PartSelect Number PS12717913

Manufacturer Part Number 5304518661

This part is a replacement electronic clock/timer for your oven. The clock timer will display the time, and can be used to set a timer. If the clock will not start, will not allow you to program the time or timer, or if the touchpad does not respond at all, you may need to replace the clock. As you will be working around electricity for this repair, be sure to disconnect power from the oven before you begin. This part is sold individually.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Touchpad does not respond
See more...

Installation Instructions

Alberto from Houston, TX

We had a transformer go out in our block and made a surge which blew out the electronic oven control

The repair of the oven was really easy . I removed a total of 7 screws with a 1/4 inch nut driver to remove the back cover of the instrument panel. I then unplugged the wires from the from the oven control and with a phillups screw driver I removed 4 screws that hold the oven control,the face plate with the words on it has to be taken off the old control and put on the new one . I then installed the new oven control by putting the 4 screws back on and plugging back the wires. I then replaced the back cover with the 7 screws and plugged the power back in the outlet, The clock has to be adjusted and your done. Read more...

Your Price

$126.60

Kenmore Range Control Oven To9

★★★★★

66 Reviews

PartSelect Number PS16873547

Manufacturer Part Number WB27X45466

This electronic control board is the central component of your wall oven, managing functions such as temperature regulation and heating elements. The manufacturer has modified the wiring on this part, so professional installation may be necessary for proper setup. Before installation, shut off the circuit breaker or unplug the oven for safety. This genuine OEM part ensures optimal oven performance and compatibility with select models.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Oven is too hot
See more...

Installation Instructions

Julien from Barnhart, MO

Blown Oven Control Board

After removing the back of the range the oven control board was visible and accessible by removing four nuts. There was some resistance removing the leads from the oven coils and light-bulb mechanisms but with some leverage and pliers they came loose. The only challenge was the face plate of the unit is attached using adhesive and needed to be carefully peeled off and added to the new oven control board. Getting this right was just a matter of taking time and lining up the components correctly. After applying the face, the new control board went right in. I reattached the back, plugged the unit back in, and the over has worked great for the past week. Part select being able to identify the part numbers listed from the component likely saved me at least $100 of having a GE certified repair technician come in. Read more...

Videos!

Your Price

$41.66

Kenmore Range Overlay

★★★★★

1 Review

PartSelect Number PS12114508

Manufacturer Part Number 316220728

White in color. Overlay only.

Fixes these symptoms

Touchpad does not respond
See more...

Installation Instructions

John from Montesano, WA

broiler element would not shut off

I had already switched off the breaker for the range, so I unplugged the unit and moved it out from the wall. I removed the screws on the rear cover and exposed the clock/timer. I then removed the four screws holding the clock/timer,used my pocket knife to gently pry the wires off of the old unit one at a time, as these were very tight. Holding the new clock/timer in my other hand I installed the wires one at a time to match the original clock timer wiring.I installed the clock/timer, the range back cover, slid the range back into place, plugged it in and turned on the breaker. My wife is happy, I am too.
A repair shop wanted $100.00 just to go to our home and look at our range. We spent $104.00 plus $20.00 for the new overlay, fifteen minutes of my time, a real bargin!
Thank you PartSelect, I'll be ordering from you again! Read more...

Your Price

$31.96

Kenmore Range Overlay

★★★★★

6 Reviews

PartSelect Number PS12114509

Manufacturer Part Number 316220729

This part is a replacement clock overlay for your range. It is black in color and approximately 7 inches by 3 inches. The clock overlay is found on the control panel, and it covers and labels the selection buttons of the oven control board. If the touchpad will not respond, or the oven will not start, you may need to replace the clock overlay. Be sure to disconnect the range from the power source before you begin this repair. This part is sold individually and is an authentic OEM part.

Fixes these symptoms

Little to no heat when baking
Touchpad does not respond
Will not program
See more...

Installation Instructions

Thomas from St. Petersburg, FL

unit lost digital display, wouldn't control oven

First I weighted out weather it was better to repair the unit or relpace it with a used one. The stove was in good condition so a small investment of $140.00 was a no brainer, repair went off smothly once I found your web site and could see the parts I needed for the repair, also realy enjoyed the timely manor in which I received the parts, Thanks. Tom Read more...

Your Price

$50.39

Kenmore Range Overlay (black)

★★★★★

2 Reviews

PartSelect Number PS2581771

Manufacturer Part Number 316419141

This is the overly only. Control board is NOT included. Black in color. Genuine OEM part.

Fixes these symptoms

Touchpad does not respond
See more...

Installation Instructions

Robert from Slidell, LA

Bake element blew out

Removed and replaced bake element. Discovered that oven control module had also blown out. Ordered and replaced new control unit. Stove placed back in service. Read more...

Your Price

$39.15

Kenmore Range Overlay

★★★★★

3 Reviews

PartSelect Number PS3495602

Manufacturer Part Number 316419353

This is the overlay only. Control board is NOT included. Must be ordered separately.

Fixes these symptoms

Touchpad does not respond
See more...

Installation Instructions

Dennis from LAVACA, AR

Cracked display

Peel off old ( might have to use a putty blade to get it started] then put on the new overlay. Read more...

Your Price

$234.95

Kenmore Range Electronic Clock/timer

PartSelect Number PS1528269

Manufacturer Part Number 316455420

This part is also known as the "brains" of the appliance.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Bill from SOLANA BEACH, CA

Black frame cracked / disintegrated

The thin black plastic frame around the old one had become brittle and cracked/disintegrated. So, nothing to hold the functioning unit to the frame.
All I needed was a new frame.
The one that was shipped was the wrong model number, so it is useless to me.
I will be returning it for a refund.
Thank you for trying, so sorry, no cigar.
Best, Bill Elliott redbeds77@gmail.com 760-505-8009 Read more...

40% OFF

Your Price

$125.99

$210.95

Kenmore Range Oven Control Board

★★★★★

3 Reviews

PartSelect Number PS1528270

Manufacturer Part Number 316455430

Oven control board 316455430 is an original equipment manufacturer (OEM) part that fits some Kenmore 790-series gas ranges. Oven control board 316455430 monitors the temperature and controls the oven heat. This oven control board includes the digital clock but doesn't include the overlay that marks the control buttons. Transfer the overlay from the existing oven control board to the new control board or order and install a new overlay on the new control board when installing.

Fixes these symptoms

Touchpad does not respond
See more...

Installation Instructions

Bill from BREMERTON, WA

Replacing the control board on a Kenmore range

I watched a YouTube video and followed their instructions. Pull the range out from the wall, unplug it. Take out a few screws with a nutdriver and take off the back. Unplug and unscrew the old control board. Remove the cover from the old control board (I had to use a razor knife to separate it from the control board). Stick it on the new one (plenty of sticky stuff left), screw in the control board. Plug the wires back in, screw the back on, and you're in business. Easy, maybe five minutes work. Read more...