Kenmore Range Brackets and Flanges

Kenmore Appliance Parts

Popular Kenmore Range Brackets and Flanges

Your Price
$16.68
  In Stock
Kenmore Range Single Heating Element Support Clip
★★★★★
★★★★★
7 Reviews
PartSelect Number PS243701
Manufacturer Part Number WB2X9719
The metallic clip, or also known as a broil element support, is for a oven element on a range. This part holds the broil element in place on top of the oven. If your support clip is broken then this replacement should be the solution. The tools needed for this project are slip joint pliers. For safety precautions, make sure to unplug your range from the power source, or shut off the house circuit breaker before starting this project. Refer to the installation instructions for best results and accuracy.
Fixes these symptoms
Installation Instructions
Paul from Canton, NY
broiling element had burned through, req. its replacement
First I removed the two screws that hold the element in place. I also removed a screw that held one end of a support bracket. I then pulled the element out about 3 inches and disconnected the two wires. Reversing these steps, I finished the element's replacement.

I had noticed that the former element was sagging at the front end. I installed the additional clips (not original) on each forward end of the element for additional support.
Read more...
Your Price
$11.25
  In Stock
Kenmore Range Anti-Tip Kit
★★★★★
★★★★★
4 Reviews
PartSelect Number PS3655242
Manufacturer Part Number 316112005
The anti-tip bracket kit comes with one metal bracket and two installation screws, and is sourced directly from the genuine manufacturer. It prevents the freestanding oven, range, or stove from tipping when force or weight is applied to an open oven door. The bracket is secured to the floor and wall and fits over the rear leveling leg in the back of the appliance, in a cutout specifically designed for the anti-tip bracket. This part is very essential to the safe operation of the appliance. Failure to install the bracket properly can result in the oven tipping or falling and causing injuries.
Installation Instructions
Brian from Panama City Beach, FL
anti-tip bracket not installed
I was selling my home and did not realize that the anti-tip bracket was not originally installed. A home inspection caught the problem and the buyers required that I install one. I could not find the original and obviously the installer never put it in place to begin with. The buyers wanted this resolved within a week so I had to act fast. I could not find one locally so I found what I needed on your website. It arrived in a couple of days and was easy to install. I used the template provided in the kit and drove the screws through the bracket into the wood plate behind the drywall. Pushed the range back in place and that's it. Couldn't get any easier. Read more...
Your Price
$155.72
  In Stock
Kenmore Range Dual surface element switch
★★★★★
★★★★★
4 Reviews
PartSelect Number PS3504401
Manufacturer Part Number 316238201
This switch controls the stove top surface burner. This surface element control switch is for ranges. Surface element control switch turns the surface element on and off and controls how much heat the element produces. Unplug the range or shut off the house circuit breaker for the range before installing this part.
Fixes these symptoms
Installation Instructions
Miguel from PLANT CITY, FL
The front left dual element stopped regulating temperature
Replaced the dual element switch and that fixed it up Read more...
Your Price
$20.02
  In Stock
Kenmore Range BRACKET ANTI-TIP Assembly
★★★★★
★★★★★
2 Reviews
PartSelect Number PS2364689
Manufacturer Part Number WB02K10254
Your Price
$8.06
  In Stock
Kenmore Range Secure Down Bracket
PartSelect Number PS241604
Manufacturer Part Number WB2K5328
Your Price
$11.23
  In Stock
Kenmore Range TOOL
PartSelect Number PS978753
Manufacturer Part Number 318246702
Your Price
$28.69
  In Stock
Kenmore Range Broil Element Support
PartSelect Number PS241927
Manufacturer Part Number WB2X1452
This part supports the broil element in the oven.
Installation Instructions
Donna from Sinking Spring, PA
Still need an other nut to keep broiler support inplcae. Support bar did not come with new screws so I must locate one new one.
I took out the old broiler support bar, but it was being held by one screw. I did install the new bar with one screw, but I need to obtain a second screw. I still have not located a second screw, but it is inplace. Read more...
Your Price
$8.12
  In Stock
Kenmore Range Anchor
PartSelect Number PS11740693
Manufacturer Part Number WP308125
Your Price
$13.31
  In Stock
Kenmore Range SUPPORT BROIL
★★★★★
★★★★★
1 Review
PartSelect Number PS223060
Manufacturer Part Number WB02K10028
Your Price
$8.06
  In Stock
Kenmore Range Receptacle Clip
★★★★★
★★★★★
1 Review
PartSelect Number PS953026
Manufacturer Part Number WB17T10009
Clip only.
Fixes these symptoms
Installation Instructions
Bobbie from RICHMOND, KY
My front big burner on My stove had stopped working.
I went online and and saw a man on Utube that had the same problem with His stove and He had His video showing how to fix it so I ordered the part from Parts Select using My model number from My stove and took the old broken part off and installed My new part all by Myself. It has been working great and I am so glad to have it working again. Read more...

Related Kenmore Range Parts