Kenmore Range Seals and Gaskets

Kenmore Appliance Parts
Shop By Part Type

Popular Kenmore Range Seals and Gaskets

Your Price
$63.92
  In Stock
Door Gasket
★★★★★
★★★★★
(14)
PartSelect Number PS11749287
Manufacturer Part Number WPW10162384
The oven door gasket on your range functions as a seal between the warm interior of your oven, and the outside. It prevents heat from fleeing your oven when the door is closed. Before making any repairs to your oven you should make sure to wear work gloves to protect your hands, and give your oven time to cool. The only tool you will need to make this repair is a pair of needle nose pliers. This oven door gasket comes with built in retaining clips; if any retaining clips from your old gasket are left in the oven make sure to remove them before installing your new gasket.
Fixes these symptoms
  • Door won’t close
  • Little to no heat when baking
  • Oven is too hot
  • See more...
Installation Instructions
Lori from Scottsdale, AZ
Needed to replace oven door gasket.
First removed the old gasket using a needle-nose pliers. Then placed new gasket by inserting the little clips on the gasket. Took 5 minutes. Great instructions from Repair Forum. Read more...
Your Price
$72.64
  In Stock
Oven Door Seal with Clips
★★★★★
★★★★★
(3)
PartSelect Number PS440011
Manufacturer Part Number 316239700
Also known as gasket.
Installation Instructions
CHERYL from PERRYVILLE, AR
Gasket missing
I took the brads that were left from the old gasket off with needle nose pliers. Then I put the new one on. It was very easy. Read more...
Your Price
$7.80
  In Stock
Light Gasket
★★★★★
★★★★★
(5)
PartSelect Number PS11740863
Manufacturer Part Number WP3184533
This part creates a seal around the light lens and bulb.
Installation Instructions
David from Westminster, CO
Fiber Gasket around Pyrex Light Lens was mis-shaped
All I had to do was unscrew the pyrex lens over the oven light and then remove the old gasket and replace it with the new one. Worked like a champ! Read more...
Your Price
$36.62
  In Stock
Range Oven Door Gasket
★★★★★
★★★★★
(8)
PartSelect Number PS8753695
Manufacturer Part Number WB04T10086
The oven door gasket creates a seal between the oven door and the opening of the oven to prevent heat from escaping when the oven is closed.
Installation Instructions
JUDITH from DANVILLE, NH
Oven door gasket needed replacement
Replacement was extremely easy. The new part fit perfectly and installed very easily without tools. Also, I received the part within a few days Read more...
Your Price
$136.22
  In Stock
Door Seal
PartSelect Number PS977704
Manufacturer Part Number 316405000
Your Price
$33.72
  In Stock
Door Gasket
★★★★★
★★★★★
(2)
PartSelect Number PS250264
Manufacturer Part Number WB4K1
Installation Instructions
Robert from New York, NY
Door gasket broken up
It took considerable time to remove the door and take it completely apart so the gasket could be inserted, and time again to reassemble properly. The gasket (though the no. was confirmed before ordering) was 3" too short so I had to cut some off the old gasket to make do (not entirely effectively). Read more...
Your Price
$53.67
  In Stock
Door Gasket
★★★★★
★★★★★
(4)
PartSelect Number PS227138
Manufacturer Part Number WB04T10022
This gasket is used to seal the oven door. This Is Approx 73" Long For 84" Long Order PS227119
Installation Instructions
Michael from Shapleigh, ME
Damaged oven door gasket
Very easy repair. The gasket ends are stuffed into slots right below the oven window and the gasket is held in with small wire clips that pop into holes in the door. Just pull the old gasket off, no tools. Install the gasket starting by stuffing one end into the slot mentioned above until the first clip lines up with the first small hole. Then insert each successive clip into the corresponding holes. Then use a slot screwdriver to stuff the other end of the gasket into the second slot. No sweat. Read more...
Your Price
$53.00
  In Stock
SEAL- DOOR
★★★★★
★★★★★
(4)
PartSelect Number PS11743859
Manufacturer Part Number WP71001841
This oven door gasket prevents heat from escaping the oven cavity when in use. This is a very easy repair that should only take a few minutes. The door gasket may damage or rip over time due to repeated use. If you notice that hot air is escaping from your oven, it is likely that the gasket needs to be replaced. You will need to open the oven door and remove the old seal by pulling it out of place with your hands. The old gasket will be secured with clips that will come out when you pull the entire piece out. The new gasket will have hooks all along the rim, which will line up with the oven door. Simply line up the hooks and push into place outlining the door of the inside of the oven. No tools required.
Fixes these symptoms
  • Door won’t close
  • Oven not heating evenly
  • See more...
Installation Instructions
cheryl from dolores, CO
oven door gasket was no longer flexible, but stiff
pulled out the old door gasket, it had little diamond-shaped clips, pulled out really easily, replaced with the new gasket. All the clips fit into the proper holes, stuffed the new ends where the old ones were. Perfect. less than 10 minutes. Thanks.... Read more...
Your Price
$87.15
  On Order
Oven Door Seal
★★★★★
★★★★★
(4)
PartSelect Number PS11757564
Manufacturer Part Number WPY702338
This oven door seal prevents heat from escaping the oven cavity when in use.
Fixes these symptoms
  • Little to no heat when baking
  • Oven not heating evenly
  • See more...
Installation Instructions
Paul from Mickleton, NJ
The oven door seal was ripped and was leaking.
The oven seal replacement was very straight forward. Two screws held the door to the arms coming from the oven. I slid the door up off the arm and moved it to a workbench. This whole process should take about 15 minutes, a little longer if your unit is older and you want to clean as you go. Mine was fairly dirty and I gave it a cleaning as I removed parts. Unscrew all screws on the outer frame of the door, including two small ones on the side. Remove the outer frame and then the glass front and set them aside. A few more screws to remove the glass from the inner door, and even more on the remaining part of the door. You should also remove the screws holding the tiny brackets as well to release the portion that holds the oven seal in place. This is very straightforward, just keep pulling screws out until you can remove the old seal.

Once the old seal is out, insert the new one using the wire embedded in the seal as your guide...the gap in the seal goes to the bottom. Put everything back together and re-install the door. My door hinges were spring loaded and took a little effort to move them down so the door can be slipped on. This is a two person job since the hinges do not lock in place, they spring right back up flush with the oven and you cannot install the door. Re-install the two set screws holding the door to the hinges and you are done!

With the new seal in place, it felt a little puffy and the door did not seem to close as flush as it used to. This makes sense since the seal is new. I kept the door locked (like you would to use the oven cleaning cycle). I even kept it partially locked during cooking.

Frankly, the hardest part was the cleanup of nasty grease and dirt that built up over the past decade or so.

Best of luck!
Read more...
Your Price
$78.61
  In Stock
Door Seal
PartSelect Number PS978383
Manufacturer Part Number 318053120
This part has been replaced by the manufacture. It may differ in appearance but will still function the same.

Related Parts