Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
William T - December 30, 2020
Verified Purchase
Perfect fit
The belt came quick but for some reason didn't get tracking on it but arrived fast and was easy to put on
★★★★★
★★★★★
JOHNNY T - December 9, 2020
Verified Purchase
delt
worked perfect
★★★★★
★★★★★
Paula B - January 25, 2019
Verified Purchase
Got it working...
When the part finally got here, (it took over a week and more), got it in okay and so far it's working.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jose
July 24, 2017
The belt # pje1300 it's good for this model
For model number GFWH2400L0WW
Hi Jose,
Thank you for contacting us. The belt listed for model number GFWH2400L0WW is PS3487272 (WH08X10050).
Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Glenn
December 22, 2019
When the washing machine did the final high speed spin the machine made more noise than usual and when I opened the washer door, lots of smoke came out. What parts do I need and can I fix it. I'm pretty mechanically inclined.Thanks glenn
For model number GFWH2400L0WW
Hi Glenn, you may need to replace the motor. If you hear squealing it could also be a bad/faulty driver belt. If you gave us more info, sounds you hear, where exactly the smoke is coming from we may be able to narrow it down more. Thank you for your question and good luck with your repair!
My washer washes but i won't wring or spin to go to the rinse cycle
For model number GFW450SSM1WW
Hi John, thank you for your inquiry. Your washing machine needs sufficient water pressure to remove the detergent from the drawer. Check the water pressure either by looking at the pressure gauge attached to the waterline, or by attaching pressure gauge to the valve behind your washing machine. Check the water inlet valve screens and hoses for blockages. Also, make sure the pump filter, drain hose are not clogged and drain hose is not kinked. The pump filter should be cleaned every three months or when it is clogged. This filter is installed to catch foreign items like buttons or coins and to prevent these items from entering the drain hose. It is located at the bottom right-hand corner of your machine. If all checks are fine, the most probable cause is a fault drain pump, part number PS16743374. Good luck with the repair!
When the washer goes to the spin cycle it is now off balance. This is happening on all load types.
What do I check for????
For model number GFWN1600J1WW
Hello Ron, thank you for your inquiry. According to our research, the issue is with the shock absorber, part number PS11701130. We would recommend checking the shock absorbers and replace the faulty one. We hope this information helps!