Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Greg
April 28, 2018
Hi - i have error code 3. Need new circulation pump with 2 o rings. Not sure which pump to buy. Thanks
For model number EIDW5905JS0A
Hi Greg,
Thank you for your question. The pump you have referenced in your question to us is the circulation pump for your appliance. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Dennis
August 18, 2021
Error code 30 Leak mainly in the center of the pan. Can't see leak on input or drain. Guessing circulation pump and gasket rings are needed. Not sure the part number. Any help is appreciated.
For model number EI24ID50QS0A
Hello Dennis, Thank you for Writing. i30 code or three blinks of an indicator mean that water leakage protection system has detected water got into the drip tray, the float has triggered and a valve in the Aquastop system opened the water supply. AquaStop is a precisely engineered tub and sensor system that detects leaks in the solid molded base of the dishwasher, shuts down operation and automatically pumps out water so it cannot contact the floor. To eliminate this error, it is necessary to drain the water from the tray and change the Sensor PartSelect Number PS11731946. Also, you can just drain the water and bring the float out of the “water” position, tilting a dishwasher for it. Good luck with your repair.
In the drip tray, water appears to be coming from an opening that looks like it's at the bottom of the door. I am not sure where that water originates from as i don't see a hole on the inside of the door or at the bottom. The water comes from this opening and fills the drip tray until i30 code stops the machine. When i open the door, the dishwasher tub drains, and i can see water drain down the pipe from looking down the sink drain. I don't think anything is wrong with the drain pump or the drain tube. I replaced the circulation pump thinking it was coming from there, but to no avail. I am tempted to go in the tub where the tub water circulates and drains, to see if these openings are clogged, but since the circulation pump works and the tub drains, my gut says this is not where the problem is. Any ideas?
For model number EI24ID50QS0A
Hello Dennis, thank you for your question. With this error code, your dishwasher is informing you of a leak or water overflow, that is sitting in the drip pan (the base) of your dishwasher. With this error, the leak can be coming from multiple areas in the machine. first look for loose connections at the water inlet valve, and ensure the unit is properly leveled. Look for potential leaks in the water fill valve and inspect the drain pump for blocks or clogging. If parts are damaged, rusted, or otherwise defective, they’ll have to be replaced. We hope this helps!
Was this helpful?
Thank you for voting!
Ron
April 8, 2018
Hello, i keep getting error code 03. I believe this is the motor causing the issue. Can you confirm? Also, does part 70 include part 60? The website isn’t quite clear. The name and the price of part 70 seems to indicate that is the case but i want to be sure. Thanks. Ron
For model number EWDW6505GS1C
Hi Ron,
Thank you for your question. The 03 error code is referring to the motor. And yes, part 70 included with part 60. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.